Db33
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 206
Registered: 25-11-2016
Member Is Offline
Mood: No Mood
|
|
any use for this broken addition funnel?
im posting photos of a broken addition funnel that came courtesy of a shotty ebay purchase and shitty delivery. anyways i was wondering if any of
these pieces could be salvaged and used for something? Im thinking the stopcock part might be at least useful as a stopper since it is airproof.
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3631
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
you could cut the female socket off of the top (not in photo')
to epoxy resin into anything that needs 'conversion' to jointed glassware.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
I've always wanted an addition funnel with two stopcocks: one on the pressure equalizing arm and one for addition. That way, you could do multiple
additions to a vigorously refluxing / distilling apparatus.
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by JJay ![](images/xpblue/lastpost.gif) | I've always wanted an addition funnel with two stopcocks: one on the pressure equalizing arm and one for addition. That way, you could do multiple
additions to a vigorously refluxing / distilling apparatus. |
They sell those, not real common, but I might even have one, what size are you liking for? I presume 24/40, or 14/20 or 29/42.
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
I bought one once, and it was smashed in the mail. I've had some awful luck shipping addition funnels, actually. I have a 1000mL now, so I don't need
it nearly as bad as I did a few months ago, but if you run across one, please do let me know.
All of my jointware is 24/40... I've been wanting to get a 14/20 set....
|
|
Meltonium
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 97
Registered: 23-9-2016
Location: Home in pajamas
Member Is Offline
Mood: Fluorinated
|
|
This happened to me recently too. It was a friedrichs condenser though. What I did was use a diamond bit with a dremmel to cut the glass around the
joints. For you situation, you might be able to use a precision blow torch or some apoxy to weld a piece of glass tubing onto your stopcock joint.
There you have a gas adapter that can control flow.
For the body of your addition funnel, you might be able to (with steady hands and damp newspaper) close off the hole at the bottom of the body and
flatten the bottom out. You might be able to get a nice tall form beaker or flat bottom reaction flask (If the top joint is still intact. The hole
where the pressure equalizer tube meets would need to be closed up as well.
You could even keep the round bottom and the hole could be used for a thermometer if the size allows.
[Edited on 1-7-2017 by Meltonium]
"If at first you don't succeed, fail, fail again."
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I just found one box of mostly broken stuff, not sure if the whole box was dropped, or just where the broken stuff was put when it was packed. At
least it seems to mostly be stuff I already have some of. But one item was also a previously nice addition funnel.
|
|