notoxicshit
Harmless
Posts: 37
Registered: 18-4-2016
Member Is Offline
Mood: No Mood
|
|
Mg/Methanol is amazing
I stumbled upon the nice review of the use of plain Mg in Methanol.
I was in awe about what unbelievable synthetic use can be made of such an easy combination.
I have attached it at the bottom.
Take some examples:
It reduces aromatic nitro groups to amines
It dehalogenates aromatic and aliphatic halides. Only the Fittig and Grignard are able to achieve that under considerably higher effort.
It also deoxygenates (and thus deprotects) and cleaves all kinda components and of course reduces conjugated double bonds in great selectivity. It
also mediates interesting reductive cyclizations.
It also reduces oximes and Grignard imine-MgX intermediates to amines.
My head is spinning, but as I do unfortunately lack formal chemistry education, I do have a few questions.
Look at the following example:
Why is the yield so bad?
An explanation would help me out alot, especially an estimation if this would be a representative example of what Mg/MeOH would do to
alpha-methylcinnamic acid?
Or is debenzylation and dehalogenation competing?
Further, I asked myself what this combo would do to aliphatic nitro groups as I don't see them mentioned in the review.
Happy posting!
Attachment: 14259790.pdf (208kB)
This file has been downloaded 6549 times
Edit: can someone access Sugden, J. K. Chem. Ind. 1969, 260. ?
I am not even sure, which journal it is, but I can not access any of the ones that could be meant.
[Edited on 15-6-2016 by notoxicshit]
[Edited on 15-6-2016 by notoxicshit]
[Edited on 15-6-2016 by notoxicshit]
|
|
|
Paddywhacker
Hazard to Others
Posts: 478
Registered: 28-2-2009
Member Is Offline
Mood: No Mood
|
|
That is very interesting, but sorry, I cannot figure what "chem. ind." is. Too many possibilities.
|
|
|
careysub
International Hazard
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
It is Chemistry and Industry (London).
The ref Paddywhacker gives is exactly what the Mg in Methanol paper gives, as poor as that is.
Unfortunately the reference seems to be too slight to bring up a usable on-line link with Google, the paper authors are assuming that everyone has
access to the physical periodical and can look up the specific issue to find out what the article is.
|
|
|
clearly_not_atara
International Hazard
Posts: 2799
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
Scheme 87, the reduction of oximes with Mg/MeOH and NH4OAc, is IMO the most interesting reaction in the review. Selective oxime reductions are few and
far between. In particular, oxime reduction is sufficient for nitro group reduction, since we know that reducing nitro groups to oximes is relatively
easy (Pd/C/[H]).
| Quote: | Look at the following example:
Why is the yield so bad? |
Molecules containing a CH2=CH-EWG linkage tend to undergo polymerization reactions catalyzed by nucleophiles, including MeO-. For example, this is how
superglue (cyanoacrylate) works.
| Quote: | | It is Chemistry and Industry (London). |
A search for the author, JK Sugden, on Google Scholar around 1970 turns up a large number of "citations" published in "CHEMISTRY & INDUSTRY"
around 1967-1970. However, the Wiley online website only has archives going back to 2011:
http://onlinelibrary.wiley.com/journal/10.1002/(ISSN)2047-6329/issues
It appears that the journal in which the article was published was not published online. Another interesting citation from JK Sugden in Chem. Ind.
around this time is "Studies on the reduction of cyclohexanone oxime" from 1967.
Anyway, the reaction should be easy to test...
[Edited on 15-6-2016 by clearly_not_atara]
|
|
|
subsecret
Hazard to Others
Posts: 424
Registered: 8-6-2013
Location: NW SC, USA
Member Is Offline
Mood: Human Sadness - Julian Casablancas & the Voidz
|
|
If you can find 4-dichlorobenzene mothballs, this would be a good route to benzene.
Fear is what you get when caution wasn't enough.
|
|
|
PHILOU Zrealone
International Hazard
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
1,4-dichlorobenzene or p-dichlorobenzene is not in use anymore into the European space.
Was stil available about 15 years ago by kilograms in Di-drugstore...as man pissodrome desoudorizer...
[Edited on 2-7-2016 by PHILOU Zrealone]
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
|
Texium
Administrator
Posts: 4618
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
It's still readily available in the US. I might have to put that on the ever-growing list of things I'd like to try at some point. If it works it
does seem like it would be a pretty easy route to benzene.
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Absolutely no references, no evidence they did it themselves, no process, no yeilds etc etc.
It's just Words, so don't stake too many $ on it.
Anyone actually interested in Chemistry and though it Might work would have tried it and would post the process.
I would, and i guess you would too if you'd made useful yields of benzene that way.
|
|
|
CharlieA
National Hazard
Posts: 646
Registered: 11-8-2015
Location: Missouri, USA
Member Is Offline
Mood: No Mood
|
|
...
Look at the following example:
Why is the yield so bad?
[/rquote]
Just as a guess, maybe steric hindrance plays a part in the relatively low yield. Of course, many would be overjoyed with a 30+% yield!
|
|
|
Corrosive Joeseph
National Hazard
Posts: 915
Registered: 17-5-2015
Location: The Other Place
Member Is Offline
Mood: Cyclic
|
|
This sounds too good to be true but I don't know enough to comment...................
For anyone interested in Mg reduction of oximes I'll drop this here -
http://www.sciencemadness.org/talk/viewthread.php?tid=8275#p...
Maybe someone else knows more or it will help somebody in the future.............
/CJ
[edit] I have just noticed this review is already linked in the thread I linked to. Maybe if notoxicshit had bothered to read the whole thread he
would have realized that maybe Mg/Methanol is not so amazing after all. But like I said, I don't know enough to comment. I only linked to the thread
because I had a vague recollection of Mg/ammonium salt not reducing oximes.
[Edited on 22-12-2016 by Corrosive Joeseph]
[Edited on 23-12-2016 by Corrosive Joeseph]
Being well adjusted to a sick society is no measure of one's mental health
|
|
|
Meltonium
Hazard to Self
Posts: 97
Registered: 23-9-2016
Location: Home in pajamas
Member Is Offline
Mood: Fluorinated
|
|
I tried the suggested experiment of creating benzene by dehalogenating p-dichlorobenzene. To cut it short, no product was formed.
I used 4g p-DCB, 2.6g Mg turnings, and 11g i-PrOH. They were refluxed for 2 hours and let cool. Nothing seemed to happen..
|
|
|
Tsjerk
International Hazard
Posts: 3032
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Did you "activate" your magnesium as is usual in for example Grignards? Maybe the oxide layer is interfering. I guess a small pince of iodide could
also help.
I forgot what the usual activation was for magnesium but it should be easy.
Shouldn't magnesium in alcohol at least make the alkoxide under generation of hydrogen?
[Edited on 23-12-2016 by Tsjerk]
[Edited on 23-12-2016 by Tsjerk]
|
|
|
Meltonium
Hazard to Self
Posts: 97
Registered: 23-9-2016
Location: Home in pajamas
Member Is Offline
Mood: Fluorinated
|
|
Quote: Originally posted by Tsjerk  | Did you "activate" your magnesium as is usual in for example Grignards? Maybe the oxide layer is interfering. I guess a small pince of iodide could
also help.
I forgot what the usual activation was for magnesium but it should be easy.
Shouldn't magnesium in alcohol at least make the alkoxide under generation of hydrogen?
[Edited on 23-12-2016 by Tsjerk]
[Edited on 23-12-2016 by Tsjerk] |
No I didn't activate the magnesium, and this may be why it didn't react properly. Unfortunately, I don't have any iodide on hand at the moment, so a
rerun will be in the future.
|
|
|
CuReUS
National Hazard
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
for 4g of p-DCB,you have to use a slight excess of 3.26g of Mg
[Edited on 23-12-2016 by CuReUS]
|
|
|
zed
International Hazard
Posts: 2284
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Now, this is a good idea Meltonium. Since Benzene is fairly hard to obtain nowadays, and I can Buy p-DCB, down at my local "Dollar Tree" fer $4 bucks
a pound. Yeah, that's right. Portland's "Dollar Tree"....... Lloyds Center. Last I checked, They were selling p-DCB @ $1 per 4oz.
Odd situation. Could this reduction require a little H2O, acid, or base..... to "Kick it Off".
Amalgamation?
"Wet" Isopropyl Alcohol?
[Edited on 29-12-2016 by zed]
|
|
|
Meltonium
Hazard to Self
Posts: 97
Registered: 23-9-2016
Location: Home in pajamas
Member Is Offline
Mood: Fluorinated
|
|
| Quote: Originally posted by zed | Now, this is a good idea Meltonium. Since Benzene is fairly hard to obtain nowadays, and I can Buy p-DCB, down at my local "Dollar Tree" fer $4 bucks
a pound. Yeah, that's right. Portland's "Dollar Tree"....... Lloyds Center. Last I checked, They were selling p-DCB @ $1 per 4oz.
Odd situation. Could this reduction require a little H2O, acid, or base..... to "Kick it Off".
Amalgamation?
"Wet" Isopropyl Alcohol?
[Edited on 29-12-2016 by zed] |
My little run did use wet isopropanol and unactivated magnesium. I'll try the reaction again soon using dry isopropanol, fresh magnesium turnings, and
maybe activate the magnesium with a little iodine like Tsjerk suggested.
I also planned on trying to make aniline from nitrobenzene using the Mg/MeOH method shown above. First I need to make nitrobenzene though. (Perhaps
from the benzene made from p-DCB???)
|
|
|
AvBaeyer
National Hazard
Posts: 651
Registered: 25-2-2014
Location: CA
Member Is Offline
Mood: No Mood
|
|
A procedure for reducing halides to the corresponding hydrocarbon using Mg/i-PrOH can be found in Organic Syntheses, Coll. Vol. 5, p 998. The detailed
example is for the reduction of monochlorobenzene to benzene. The process is relatively straightforward. No mention is made of utility for
dichlorobenzene but CCl4 can be reduced to methane. Perhaps with some investigation someone can produce benzene from 1,4-dichlorobenzene. Have fun.
AvB
|
|
|
PHILOU Zrealone
International Hazard
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
| Quote: Originally posted by Meltonium | | Quote: Originally posted by zed | Now, this is a good idea Meltonium. Since Benzene is fairly hard to obtain nowadays, and I can Buy p-DCB, down at my local "Dollar Tree" fer $4 bucks
a pound. Yeah, that's right. Portland's "Dollar Tree"....... Lloyds Center. Last I checked, They were selling p-DCB @ $1 per 4oz.
Odd situation. Could this reduction require a little H2O, acid, or base..... to "Kick it Off".
Amalgamation?
"Wet" Isopropyl Alcohol?
[Edited on 29-12-2016 by zed] |
My little run did use wet isopropanol and unactivated magnesium. I'll try the reaction again soon using dry isopropanol, fresh magnesium turnings, and
maybe activate the magnesium with a little iodine like Tsjerk suggested.
I also planned on trying to make aniline from nitrobenzene using the Mg/MeOH method shown above. First I need to make nitrobenzene though. (Perhaps
from the benzene made from p-DCB???) |
I wonder if the methanol is realy needed...
Mg/Water/(NH4)2SO4 (weak acid) may work just fine without the methanol...there just to help a little with the solvatation of the hydrophobic
nitrocompound...
Just remember that many nitroaromatic reduction by metals involve water, metal and an acid...usually a stronger one ... but
here Mg is very reactive so to temper the reaction the use of a weaker acid might be necessary.
[Edited on 30-12-2016 by PHILOU Zrealone]
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
|
Mush
National Hazard
Posts: 633
Registered: 27-12-2008
Member Is Offline
Mood: No Mood
|
|
Sugden, J.K. Reduction of Oximes. Chem. Ind. (London),1969, 9, 260,
C.A. 71,12164v
Courtesy of someone else.I hope he/she doesn't mind if I share it with you guys.
Attachment: Sugden__J.K.__Chem._Ind.__1969__9__p_260.pdf (1016kB)
This file has been downloaded 639 times
|
|
|
Meltonium
Hazard to Self
Posts: 97
Registered: 23-9-2016
Location: Home in pajamas
Member Is Offline
Mood: Fluorinated
|
|
I'm attempting the p-DCB -> Benzene reaction again this time using an excess of 91% isopropanol, 4g p-DCB, and 3.3g Mg powder/turnings.
I have been refluxing the mixture for about an hour now and nothing seems to be happening. Do I add the pinch of iodine to attempt and 'activate' the
magnesium, or should I add some sort of acid to try to get the reaction going?
If this run doesn't work, then I'll try again using anhydrous i-PrOH or tert-butanol because the diagram says that may work as well (I had dried some
for this run but then I spilled it and gave up)
Update:
The solution was refluxed for 3 hours and then one bead of iodine was dropped into the flask. A brown color appeared from the dissolution of the
Iodine. After 2 hours, the brown color mostly disappeared and the magnesium had turned black.
[Edited on 1-1-2017 by Meltonium]
|
|
|
Meltonium
Hazard to Self
Posts: 97
Registered: 23-9-2016
Location: Home in pajamas
Member Is Offline
Mood: Fluorinated
|
|
My most recent attempt, I think, was a failure. The mixture was filtered to remove the magnesium and the extra p-DCB that had crystalized and then
washed with water. The water caused the rest of the p-DCB to crash out of the i-PrOH solution and make fluffy, white crystals.
If any benzene was present, it was minimal.
|
|
|
careysub
International Hazard
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
| Quote: Originally posted by Meltonium | My most recent attempt, I think, was a failure. The mixture was filtered to remove the magnesium and the extra p-DCB that had crystalized and then
washed with water. The water caused the rest of the p-DCB to crash out of the i-PrOH solution and make fluffy, white crystals.
If any benzene was present, it was minimal. |
Thanks for trying this, we need negative reports for sure.
No one here has posted or referenced the original paper cited in the survey paper for dehalogenation with magnesium-methanol, which is:
Reductions of Alkyl and Aryl Halides with Magnesium and Methanol;
Robert O. Hutchins , Suchismita , Robert E. Zipkin & Ira M. Taffer; Synthetic Communications, 1989, V. 19, p. 1519.
I have attached it below.
Upon reading the paper I see that it can dehalogenate aryl iodine and bromine, but it has no effect on aryl chlorine, which you have confirmed.
So no benzene from moth balls by this method.
Attachment: hutchins2001.pdf (55kB)
This file has been downloaded 628 times
About that which we cannot speak, we must remain silent.
-Wittgenstein
Some things can never be spoken
Some things cannot be pronounced
That word does not exist in any language
It will never be uttered by a human mouth
- The Talking Heads
|
|
|
zed
International Hazard
Posts: 2284
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Ummm. Here is a link to the Organic Synthesis Procedure, cited previously.
It appears conditions are dry, additional reactants are required, and isopropyl alcohol or butyl alcohol, must be employed.
http://www.orgsyn.org/Content/pdfs/procedures/CV5P0998.pdf
Now, I read the experimental details, and the actual solvent employed is decalin. It is brought to a reflux at approximately 180 C., and your
isopropyl alcohol and Chlorobenzene are added Slowly. In an inert atmosphere.
So..... If you are trying to get the same results by refluxing your reactants in excess isopropyl alcohol.....you are going to miss the recorded,
successful, reaction conditions by a lot. Isopropyl boils at ~82 C.. About 100 C. below the experimental conditions actually employed in Org.Syn..
[Edited on 21-1-2017 by zed]
[Edited on 21-1-2017 by zed]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
