RocksInHead
Harmless
Posts: 39
Registered: 16-6-2016
Member Is Offline
Mood: Highly Nitrated
|
|
fume hood help
Hi everyone, recently I purchased a fume hood for around $750 off of ebay. However, there is a problem. Upon powering on the blower, the LCD display
reads END TIME ALARM and there is a constant beeping sound. No matter what buttons I press the alarm won't turn off, and the alarm mute button does
not work. The blower and light powers on fine. The filters will definatly need to be replaced, which wont be cheap. I have some idea when it was last
inspected, which is either 2008 or 2002 (the inspectors handwriting is awful). I am hoping some of you will maybe have some experience with fume hoods
might be able to help me (hopefully it is an easy fix!) or maybe you have had this problem before and resolved it.
![20161108_173542.jpg - 1.1MB](https://www.sciencemadness.org/whisper/files.php?pid=466407&aid=54715)
Thanks in advance!
[Edited on 10-11-2016 by RocksInHead]
[Edited on 10-11-2016 by RocksInHead]
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3634
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
First, it is lucky that you are not an evangelist or that warning message could be rather worrying ... END TIME ALARM.
There could be a sensor on/in the filter pack
but I suspect that all is required is to reset a timer
that encourages you to buy new filters
You need a manual.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
If you got no manual, try pressing and holding each button to see if it switches into a menu.
|
|
RocksInHead
Harmless
Posts: 39
Registered: 16-6-2016
Member Is Offline
Mood: Highly Nitrated
|
|
The manual doesn't say anything about the end time alarm message, and this unit does not contain sensors for detecting if anything bypasses the
filters, but it does have a timer that will go off after a certain amount of blower usage. I too think it might be just having to reset the timer, and
I will try what aga said when I get home. The filters will need to be replaced, and I could only find one website that sells the filters $500 for one
(or two, as the manufactures cataloug no. is for a filter pair but the website doesn't specify).
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3634
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
sometimes, to get to service menus, you need to hold down a certain switch during power up sequence.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
TheNerdyFarmer
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 131
Registered: 30-9-2016
Member Is Offline
Mood: No Mood
|
|
Have you tried turning it off and on again.
|
|