TheNerdyFarmer
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 131
Registered: 30-9-2016
Member Is Offline
Mood: No Mood
|
|
Copper Hydroxide Problem
I have been attempting the seemingly simple synthesis of Copper hydroxide but it keeps failing. I always end up getting a black or dark green
precipitate when I do it. The reaction seems pretty temperature sensitive because when it is warm it turns black and when room temperature it seems to
turn blue then to a dark green.
What I assumed at first was the copper sulfate I was using (root killer). So I went through the whole process of crystalizing a bunch out but it still
failed.
Then I tried to cool my reactants down because it was a pretty exothermic reaction. So then the copper hydroxide started blue but ended up a dark
greenish black. I then thought that it was oxidizing to copper oxide (seeing as copper hydroxide turns to copper oxide over time) but couldn't think
of a reason why.
Could someone please help show me what I'm doing wrong.
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4299
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
If you're just adding sodium hydroxide to a solution of copper(II) sulphate, you're probably getting a basic sulphate.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
Neme
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 86
Registered: 28-5-2016
Location: Czech republic
Member Is Offline
Mood: No Mood
|
|
Nile red's video: https://www.youtube.com/watch?v=YniCGw-rqmU
If I remember correctly, he had same issue so he used other route via some NH4OH.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Edit:
Sorry, I was under the impression that Cu(OH)2 didn't exist as a pure substance. Wikipedia seems to disagree.
My best advice is to use cold reagents and not an excess of lye, this promotes the conversion into the oxide.
[Edited on 7-11-16 by Fulmen]
We're not banging rocks together here. We know how to put a man back together.
|
|
TheNerdyFarmer
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 131
Registered: 30-9-2016
Member Is Offline
Mood: No Mood
|
|
Thanks for the replies. I think I'm gonna try nile red's method and see if that works for me. The book I was going by says to simply make your
solutions and then dump them in with each other. Anyway thanks for the help.
|
|
byko3y
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 721
Registered: 16-3-2015
Member Is Offline
Mood: dooM
|
|
You need either ammonia or glycerol - both serve to complex the copper and suppress its dehydration. You can't make a good quality Cu(OH)2 in a pure
water. Neither it is sold in a pure form: 32733 Copper(II) hydroxide, tech. 94%, stab.
PS: soluble phosphate can also be used for stabilization, most likely it is the one that is used nowadays.
[Edited on 7-11-2016 by byko3y]
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7991
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Glycerol does not sound like a good alternative to me. It forms highly soluble complexes which do not precipitate and besides that, there will be slow
internal oxidation/reduction of the complex, resulting in red copper(I) oxide and some oxidized glycerol.
With ammonia you could do this, but be sure to use excess copper sulfate. If you use excess ammonia, then you get the highly soluble royal blue
cuprammine complex of copper(II).
Copper(II) hydroxide is a very unstable compound and very easily loses water:
Cu(OH)2 --> CuO + H2O
Even when stored under water it easily loses water. This causes the change from blue to black when you try to heat or dry the copper(II) hydroxide. I
have seen procedures for preparation and isolation of high purity copper(II) hydroxide, but these involved the use of vacuum for drying. The process
requires the use of cold dilute solutions of copper sulfate and cold dilute ammonia (or dilute sodium hydroxide) and allowing the material to settle
at the bottom. These solutions should be free of carbon dioxide or carbonate.
You then can rinse with a lot of water and then the vacuum filtered slurry must be allowed to dry under vacuum in the cold. Drying in air does not
work. It will absorb CO2 from air and become green/cyan instead of pure blue, due to formation of a basic carbonate.
|
|
wg48
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 821
Registered: 21-11-2015
Member Is Offline
Mood: No Mood
|
|
I have never noticed Cu(2)OH2 decomposing though I have only seen it on the way to other reactions.
The following link confirms its instablity and to me its exotic mechanisms.
http://www.sciencedirect.com/science/article/pii/S1293255803...
"Copper hydroxide Cu(OH)2 is metastable. It easily transforms into copper oxide CuO more stable, either in the solid state by a thermal dehydration or
at room temperature, in aqueous basic solutions. In the solid state, the transformation is performed at a relatively low temperature, 423 K. It is a
topotactic or a pseudomorphic transformation owing to clear relationships between axes of the two solids, in the three directions. The reacting
process is described and the corresponding vectorial relations between crystal parameters are proposed. It is not the same case in aqueous basic
solutions. Copper hydroxide gives rise to oxide through the formation of a complex anion, Cu(OH)42−, by a reconstructive transformation involving a
dissolution reaction followed by a precipitation."
I had to look up topotactic and pseudomorphic LOL
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4299
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
In one of our labs, we have our students make Cu(OH)2 (or some variant thereof) and then decompose it to the oxide. Excess hydroxide causes it to
decompose much more readily (if you use exactly 1:2 CuSO4:NaOH, it stays blue no matter how long it's left in boiling water).
I have read that to get a filterable, light-blue Cu(OH)2, you have to add dilute ammonia, without adding enough to get the complex ion.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
byko3y
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 721
Registered: 16-3-2015
Member Is Offline
Mood: dooM
|
|
woelen, I've being storing my Cu(OH)2 prepared with 1% glycerol as stabilizer for 6 month already, and it's still the same blue solid
as it was when just prepared (I might have used slightly more glycerol probably, that's why it's more stable than the one with 1% stabilizer).
I see no way for a solid copper hydroxide to oxidize glycerol at room temperature without some kind of catalyst (radical initiator, additional inert
solvent as a reaction medium, etc).
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7991
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I have quite different experience with glycerol in combination with copper(II) salts in alkaline environments. However, I used more concentrated
solutions in my experiments, with excess base. In such solutions, the copper(II) forms a soluble deep blue complex, which slowly decomposes, giving
brick-red copper(I) oxide.
|
|
ave369
Eastern European Lady of Mad Science
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 596
Registered: 8-7-2015
Location: No Location
Member Is Offline
Mood: No Mood
|
|
I thought Cu(OH)2 only exists as a wet goop, and decomposes to CuO if you try to dry it.
Smells like ammonia....
|
|
byko3y
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 721
Registered: 16-3-2015
Member Is Offline
Mood: dooM
|
|
Already discussed above - your assumption is not completely correct.
|
|