metalresearcher
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 737
Registered: 7-9-2010
Member Is Offline
Mood: Reactive
|
|
Which vacuum pump ?
I am looking for a vacuum pump for obtaining pressures preferably under 0.01 bar.
I found several on amazon.com for prices ranging from $100 to $300.
But no description of a pump tells the pressure to be obtained.
And are two stages pumps for a better vacuum ?
Does somebody know which is best ?
https://www.amazon.co.uk/dp/B0105UV508?psc=1
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3633
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
What is significant about 0.01 bar ?
What do you want your vacuum pump for ?
I bought a dual stage rotary rated at 0.3 pa thinking that it must be more useful than the cheaper single stage 5 pa types ...
(1 bar = 100,000 pa, 0.01 bar = 10 pa =
http://www.ebay.co.uk/itm/New-2-5CFM-1-4HP-Single-Stage-Rota...
wrong !
there is virtually nothing in hobby chemistry that requires such low pressure,
for mollecular distillation and thermionics, a mean free path of 100mm requires a vacuum of 0.1 pa ... too low for my dual stage rotary
https://en.wikipedia.org/wiki/Mean_free_path
then there is the problem of contaminating the pump,
the HVAC pumps are iintended to handle a little water vapour,
but the oil and aluminium can be damaged by most things that we are likely to filter or distill.
And unobtainable (for the average hobbyist) low temperatures are required for even simple traps.
chemically resistant membrane/diaphragm pumps should cover most needs, but ultimate vacuum is not as good as a rotary.
IF I was starting again, knowing what I now know,
I still could not choose ![:)](./images/smilies/smile.gif)
I think that you should specify (to yourself) what you want the pump for ... not easy.
If you do go for a rotary
I believe that the cheaper pumps such as the one pointed to above are good value
... check the cost of parts or service for (for example) an Edwards pump.
Also, there are endless threads on this topic here at SM ![:)](./images/smilies/smile.gif)
and the pump that you pointed to has "15 Microns " in the description, 15 um = 0.015 mm (Hg) = 2 pa = not very good for a two stage rotary.
(better to buy a cheap 0.3 pa Chinese pump, even allowing for 'enhanced' advertising specifications)
[Edited on 5-11-2016 by Sulaiman]
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
wg48
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 821
Registered: 21-11-2015
Member Is Offline
Mood: No Mood
|
|
I guess you missed this in the description of that pump: "Ultimate Vacuum: 15 Microns" which is about 0.000,015 bar. So until the oil gets too
contaminated or the pump too corroded or worn it will reach 0.01bar.
As the prevous poster suggested you need to know what you want from the pump and of cause what your willing to pay Reading the discriptions will help
a lot too LOL.
|
|
metalresearcher
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 737
Registered: 7-9-2010
Member Is Offline
Mood: Reactive
|
|
What I want to do with it ?
Vacuum distillations of aqueous solutions, low pressure experiments with water and ethanol.
|
|
yobbo II
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 728
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
Get an aspirator
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Yobbo is right.
Water kills most other pumps, and an aspirator will drop the pressure to the point where water boils so that's as good as you need.
|
|
Mush
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 633
Registered: 27-12-2008
Member Is Offline
Mood: No Mood
|
|
This vacuum pump def suits your need. 49.99 GBP . I wouldn't buy an expensive one unless I'm a pro user.
http://www.ebay.co.uk/itm/like/1-4HP-5Pa-220V-50Hz-2-5CFM-Si...
[Edited on 7-11-2016 by Mush]
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
That pump will suit your needs until it gets killed by the water vapour. It might last a year, but I'd bet on shorter than that.
|
|
pineapplechunk
Harmless
Posts: 1
Registered: 14-5-2017
Member Is Offline
Mood: No Mood
|
|
http://www.ebay.com.au/itm/180W-Water-Circulating-Vacuum-Pum...
Thoughts on this. Is this like an expensive version of an aspirator?
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
It's an aspirator with a fancy outer casing, really.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
cjacob
Harmless
Posts: 1
Registered: 20-9-2017
Member Is Offline
Mood: No Mood
|
|
Karlsson Robotics is a brand that produces good vacuum pumps, I am sure you will get a good one from this brand. Try searching on Amazon as well.
|
|
Texium
|
Thread Moved 27-11-2023 at 11:35 |