Matthew
Harmless
Posts: 6
Registered: 2-11-2016
Member Is Offline
Mood: No Mood
|
|
Production of Potassium Chlorate
I have been reading online that KClO3 can be made by performing electrolysis in a solution of KCl (KCl+3H2O ->
KClO3 + 3H2). I also read that KOH is produced in the same way but with 2KCl + 2H2O = 2KOH+H2. What is the
difference? Do I need to heat the solution in order for it to work?
|
|
|
Neme
Hazard to Self
Posts: 86
Registered: 28-5-2016
Location: Czech republic
Member Is Offline
Mood: No Mood
|
|
These equations are wrong.
Electrolysis of KCl gives you Cl2 and KOH (+unimportant H2). These two react with each other to form HCl and KClO. At elevated temperatures, I guess
around 70-80°C, KClO disproportionate back to the default KCl and your wanted KClO3.
If you want KOH just do electrolysis with two separate cells to prevent reacting KOH and chlorine gas.
To be honest I have no experiences in this field, correct me if I'm wrong.
|
|
|
Matthew
Harmless
Posts: 6
Registered: 2-11-2016
Member Is Offline
Mood: No Mood
|
|
Thank you. I made some lye recently with the two-chambered electrolysis. The do you know if there is any use for the Cl solution?
|
|
|
hyfalcon
International Hazard
Posts: 1003
Registered: 29-3-2012
Member Is Offline
Mood: No Mood
|
|
bleach
|
|
|
Meltonium
Hazard to Self
Posts: 97
Registered: 23-9-2016
Location: Home in pajamas
Member Is Offline
Mood: Fluorinated
|
|
Alternatively, you can make KClO3 by boiling bleach down until the NaCl starts to crash out, isolate the liquid layer, and add a saturated solution of
KCl. The KClO3 will precipitate out.
3NaClO -> 2NaCl + NaClO3
NaClO3 + KCl -> KClO3 + NaCl
|
|
|
Matthew
Harmless
Posts: 6
Registered: 2-11-2016
Member Is Offline
Mood: No Mood
|
|
I also found this thing about preparing them this way:
here
|
|
|
Texium
|
Thread Moved
3-11-2016 at 06:48 |
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
This may help you: http://woelen.homescience.net/science/chem/exps/miniature_ch...
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
I can vouch for woelen's procedure - I used it to make some when I realized I had no bleach and needed it the next day!
|
|
|
Matthew
Harmless
Posts: 6
Registered: 2-11-2016
Member Is Offline
Mood: No Mood
|
|
Does the material that the cathode and anode is made from need to be specific? Won't carbon rods work?
|
|
|
phlogiston
International Hazard
Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
Carbon rods will work, but the anode rod will erode and you will get a very suspension of very fine carbon particles in your electrolyte. These are so
small that they are difficult to filter out, yielding a slightly contaminated product. Depending on your application, that may or may not matter.
If you require only a very small amount (a few grams) of chlorate, boiling down bleach is an option. Otherwise, go for electrolysis.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
yobbo II
National Hazard
Posts: 764
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
Read this and yill be grand
http://oxidizing.typhoonguitars.com/
|
|
|
Matthew
Harmless
Posts: 6
Registered: 2-11-2016
Member Is Offline
Mood: No Mood
|
|
Strange url but good info. 
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
