Pages:
1
2 |
Hurricoaster
Harmless
Posts: 5
Registered: 30-8-2016
Member Is Offline
Mood: No Mood
|
|
Do Walgreens Instant Cold Packs still contain Ammonium Nitrate?
Yesterday, I read this thread, and decided I would try to purify some ammonium nitrate. I bought some instant cold packs from Walgreens, and emptied the prills into
an old water bottle. I then added 300ml of water to a beaker, and started adding the prills until they wouldn't dissolve anymore (it turns out what I
thought was un-dissolved ammonium nitrate was actually a lot of anti-caking agent, but oh well). I then added another 200ml of water to dissolve the
rest, then filtered the solution. The coffee filter caught all of the anti-caking agent, and I washed the beaker out, then put the filtered ammonium
nitrate solution back in. I put this on a hot plate on medium-low heat, so that I could see water vapor coming off, but the solution did not come to a
rolling boil (my hot plate doesn't let me choose an exact temperature, so I wanted to be sure I didn't boil off the ammonium nitrate). I left it this
way overnight.
When I came back in the morning, all of the water was gone, and at the bottom of my beaker was a hard, white substance. I had to pound it with a
butter knife to break it apart. I took a chunk of this, and tried to burn it. Instead of burning, though, it just melted! Is ammonium nitrate supposed
to do that? I thought it was supposed to burn on its own, but maybe I'm wrong. How can I make sure what I have is really ammonium nitrate?
Alternatively, can anyone else confirm that the Walgreens instant cold packs still contain ammonium nitrate?
Here is a picture of the resulting substance, if that helps:
![XN0gqdy.jpg - 983kB](https://www.sciencemadness.org/whisper/files.php?pid=465024&aid=54327)
|
|
MrHomeScientist
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
Last time I bought them several months ago they did. The other possibility is urea.
I don't think ammonium nitrate burns on its own usually. If you can, convert it to potassium nitrate and mix that with an equal volume of sugar to see
if that burns. Or try adding a solution of a base to your suspected ammonium nitrate, and it should evolve ammonia gas. I'm not sure how urea would
react though, so those tests might not be specific.
|
|
Maroboduus
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 257
Registered: 14-9-2016
Location: 26 Ancho Street
Member Is Offline
Mood: vacant
|
|
Check the melting point. I'ts only around 160-170, you can do that with a MP tube and thermometer in a flask full of cooking oil.
|
|
gdflp
Super Moderator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1320
Registered: 14-2-2014
Location: NY, USA
Member Is Offline
Mood: Staring at code
|
|
Quote: Originally posted by MrHomeScientist ![](images/xpblue/lastpost.gif) | Last time I bought them several months ago they did. The other possibility is urea.
I don't think ammonium nitrate burns on its own usually. If you can, convert it to potassium nitrate and mix that with an equal volume of sugar to see
if that burns. Or try adding a solution of a base to your suspected ammonium nitrate, and it should evolve ammonia gas. I'm not sure how urea would
react though, so those tests might not be specific. |
Urea will similarly release ammonia upon reaction with a base. The reaction of an alkali nitrate with sugar however, should be characteristic.
|
|
camerican
Harmless
Posts: 13
Registered: 26-5-2016
Member Is Offline
Mood: No Mood
|
|
Somewhat off-topic, but CAN from Rival brand instant cold packs is an acceptable source of AN. The process of dissolving the AN and evaporating the
solvent is much less tedious if alcohol is used instead of water.
|
|
AngelEyes
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 187
Registered: 24-1-2003
Location: South of England
Member Is Offline
Mood: Better than it used to be.
|
|
A different test is to simply dissolve an appreciable amount of what you suspect to be Ammonium Nitrate in water. It's an endothermic reaction and the
beaker / glass / whatever will cool down as the nitrate dissolves, often quite markedly. Might be easier than melting in a flask of oil...
\'Silk and satin, leather and lace...black panties with an Angel\'s face\'
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1638
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by AngelEyes ![](images/xpblue/lastpost.gif) | A different test is to simply dissolve an appreciable amount of what you suspect to be Ammonium Nitrate in water. It's an endothermic reaction and the
beaker / glass / whatever will cool down as the nitrate dissolves, often quite markedly. Might be easier than melting in a flask of oil...
|
So does :
Ammonium sulfate
Urea
Cal Ammonium nitrate mixtures
and quite a few others that I can not recall the name off hand
|
|
Brom
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 94
Registered: 19-7-2015
Member Is Offline
Mood: No Mood
|
|
You could add some hydrochloric acid and see if it reacts with copper to determine if it is a nitrate salt. If it tests positive for nitrate and also
releases NH3 upon addition of NaOH it would have to be ammonium nitrate
|
|
Maroboduus
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 257
Registered: 14-9-2016
Location: 26 Ancho Street
Member Is Offline
Mood: vacant
|
|
Quote: Originally posted by AngelEyes ![](images/xpblue/lastpost.gif) | A different test is to simply dissolve an appreciable amount of what you suspect to be Ammonium Nitrate in water. It's an endothermic reaction and the
beaker / glass / whatever will cool down as the nitrate dissolves, often quite markedly. Might be easier than melting in a flask of oil...
|
1: Put the MP tube tied to the thermometer in the oil.
2: heat the oil
Slightly less work than making french fries.
If you're a Tater Tots in the oven kind of guy then you should probably just buy your ammonium nitrate on amazon.
EDIT:
The solubility is unusual. more than 1:1 at 0C, and 10:1 at 100C.
You might be able to eliminate quite a few other possibilities by checking solubility.
[Edited on 26-10-2016 by Maroboduus]
|
|
OneEyedPyro
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 280
Registered: 7-10-2015
Member Is Offline
Mood: No Mood
|
|
You could mix it with some sulfuric acid, you should get HNO3 fumes when you blow on it and if you add some copper wire it will produce NO2 upon
heating.
AngelEyes. Obviously anything found in cold packs is going to produce an endothermic reaction when added to water.
|
|
Brom
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 94
Registered: 19-7-2015
Member Is Offline
Mood: No Mood
|
|
I suggested using hydrochloric acid because it is the most readily available and cheap of the mineral acids and copper will not produce NO2 with
anhydrous HNO3, some water is needed or the copper will form a passivation layer. So if concentrated sulfuric acid is used it must be diluted.
|
|
OneEyedPyro
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 280
Registered: 7-10-2015
Member Is Offline
Mood: No Mood
|
|
I think the sulfuric acid stops the passivation effect of the HNO3. It worked for me with 98% sulfuric and dry ammonium nitrate.
[Edited on 27-10-2016 by OneEyedPyro]
|
|
AngelEyes
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 187
Registered: 24-1-2003
Location: South of England
Member Is Offline
Mood: Better than it used to be.
|
|
Yes, of course, not sure what the hell I was thinking...
\'Silk and satin, leather and lace...black panties with an Angel\'s face\'
|
|
Brom
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 94
Registered: 19-7-2015
Member Is Offline
Mood: No Mood
|
|
That is interesting that the sulfuric acid would prevent passivation. I will have to do some experiments with this such as placing copper in anhydrous
nitric acid then adding conc. Sulphuric acid and observe what happens.
|
|
Brom
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 94
Registered: 19-7-2015
Member Is Offline
Mood: No Mood
|
|
I just mixed some ammonium nitrate with concentrated sulphuric acid and added a piece of copper wire and after 10 minutes at 60 degrees c. no
reaction was observed. Upon addition of water NO2 was produced. And i know it is not a good idea to add water to concentrated acids but i was careful.
[Edited on 27-10-2016 by Brom]
|
|
OneEyedPyro
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 280
Registered: 7-10-2015
Member Is Offline
Mood: No Mood
|
|
Interesting, when I do it I get a nearly instant reaction. It begins boil and copious amounts of NO2 is generated.
I'm using a wad of fine copper wires from lamp cord rather than one solid piece of copper, I suspect the greater surface area is what's allowing this
to happen. I also wonder if my acid is truly 98%.
|
|
Brom
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 94
Registered: 19-7-2015
Member Is Offline
Mood: No Mood
|
|
My acid is reagent grade from EMD. I used my pure stuff so i was sure i had no water involved. But i added quite a bit of water before NO2 began to
bubble out so i wouldn't think our reagents would be different enough to give different results. Ill give it a try with some copper with a higher
surface area.
|
|
MineMan
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 998
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Just mix it with 50% mg powder and see if it lights, take out the suspense man!
|
|
Jimbo Jones
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 102
Registered: 15-10-2009
Member Is Offline
Mood: No Mood
|
|
Magnesium powder is not always available. There is even simpler way. Make some concentrated solution of the suspected AN and soak a sheet of newspaper
with it. Dry, roll and light the resulted “smoke bomb”. If the crystals are AN or a mixture with AN, the paper will burn with a lot of smoke.
|
|
Maroboduus
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 257
Registered: 14-9-2016
Location: 26 Ancho Street
Member Is Offline
Mood: vacant
|
|
It seems this stuff is probably either Ammonium Nitrate or Urea.
If he just heats a pinch of it on a spoon, shouldn't it make N2O if AN, and NH3 if Urea?
That would be an obvious difference in odor.
And if it doesn't melt fairly quickly it would be some other salt.
|
|
NitratedKittens
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 131
Registered: 13-4-2015
Location: In the basket with all the other kittens
Member Is Offline
Mood: Carbonated
|
|
Quote: Originally posted by Maroboduus ![](images/xpblue/lastpost.gif) | It seems this stuff is probably either Ammonium Nitrate or Urea.
If he just heats a pinch of it on a spoon, shouldn't it make N2O if AN, and NH3 if Urea?
That would be an obvious difference in odor.
And if it doesn't melt fairly quickly it would be some other salt.
|
Bad news, i just did this test on what i thought was ammonium nitrate from a cold pack, it was urea
Basket of kittens for you ........BOOM
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1638
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
Wall mart cold packs seem to be cal ammonium Nitrate here in Canada still, just add some ammonia to precipitate out the cal, vacuum filter and dry.
|
|
CharlieA
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 646
Registered: 11-8-2015
Location: Missouri, USA
Member Is Offline
Mood: No Mood
|
|
Today I bought "up and up" cold packs from Target. A box of two cold packs cost about $3.50 USD and contained a total of about 250 g of ammonium
nitrate (about $7 per pound). I have not yet determined the purity of the ammonium nitrate.
|
|
Laboratory of Liptakov
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1367
Registered: 2-9-2014
Location: Technion Haifa
Member Is Offline
Mood: old jew
|
|
Here is video, difference between urea and AN on the copper plate , heated simply test. Maybe help it , for you and us. Dr.
https://www.youtube.com/watch?v=URu6Z79U3EA
Development of primarily - secondary substances CHP (2015) Lithex (2022) Brightelite (2023) Nitrocelite and KC primer (2024)
|
|
npassbbi
Harmless
Posts: 1
Registered: 2-5-2017
Member Is Offline
Mood: No Mood
|
|
I've been wondering the same thing about some cold packs I bought from walgreens here in the states. I did some tests tonight, and based on solubility
(about 108g/L) and pH of the saturated solution (7, using hydrion paper), it looks like they're urea at this point.
|
|
Pages:
1
2 |