chironex
Harmless
Posts: 40
Registered: 17-10-2016
Member Is Offline
Mood: No Mood
|
|
Hydrothermal/solvothermal chemistry
So I was poking around and noticed the overwhelming lack of hydro thermal chemistry on the board. Frankly I think it's a shame since it's been some of
the most interesting for me.
There are a few variations but I'll start with your most basic. While some hydrothermal reactions can happen at lowish temperatures and standard
pressure, most are preformed in some sort of autoclave. The size and style of your autoclave will determine a lot about your reaction.
Your standard reactor is a shell of stainless steel with a removable Teflon capsule in the middle. Though you can also make one using simple plumbing
parts from the hardware store with reasonable success. This type of reactor is a batch reactor and has no moving parts. The small ones have a 20ml
capacity but can the big ones canget up to a litre easily if not more. Normally the whole thing is placed inside of an oven and the reactions take
place between 100-230 C. The reactions take half an hour on the short end, to a month on the long end, with an average of 8-10 hours being the most
common.
These reactor can be used for all sorts of things. I mostly use it for the preparation of nanostructures and inorganic materials, but it has loads of
industry uses as well. A simple example is the carbonization of organic materials such sugar. Here's a video on the formation of carbon nanofoam from
sugar link.
The reaction works by radical chemistry mostly, first hydrolyzing the sucrose to glucose and fructose, the glucose is then converted to fructose, then
that is converted to hydroxymethyl furfuryl and so on, down to either amorphous or graphitic carbon. By messing with the addatives, the temperature,
the pH and so on, you can. shape the material at a microscopic scale or add further functionality. By changing your carbon source in the above
reaction, to something with more nitrogen content, you can dope the surface of the carbon with nitrogen and amine groups which can be used later.
Hydrothermal is also great for digesting organic material for this reason and can be used to convert things like cellulose to acetic acid and other
smaller organic molecules very easily.
The technique is also incredible for producing inorganic materials. I've made a series of videos covering many different reactions and will be adding
many more soon. Here's a small selection: carbon based quantum dots, copper crystal, copper sulfide wires
There are so many more reactions that are possible though. I've tested a lot and refined my reactions down and will be filming all of them in a couple
months. Pretty much most metal oxides and sulfides are very feasible and you can sculpt them into way more shapes than you can normally. Hydrothermal
is also a good intermediate step in other reactions.
I could go on but this post is getting long. I'll post more once I've got more videos to explain things better. There are so many possibilities with
this chemistry and the reactors are easy to get online. I would highly suggest this be an addition to your chemistry tool set.
|
|
|
j_sum1
Administrator
Posts: 6333
Registered: 4-10-2014
Location: At home
Member Is Online
Mood: Most of the ducks are in a row
|
|
Is this your channel? It has been referenced before here. Nice work.
TBH, I don't know that it is an area that many here know much about. Amateurs tend to avoid high pressure high temperature stuff (for obvious
reasons) and also nanoparticles do require analysis methods that many do not have access to. But this is definitely an open field. Why don't you
stick around and start a thread that catalogues your experiments and progress. You will certainly get a following and quite possibly some who will
duplicate your attempts. Maybe begin with the details of your apparatus -- I have not yet watched the video of your furnace construction.
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Safety would definitely be a concern for these kinds of things. The pressure involved will require careful design and planning.
|
|
|
chironex
Harmless
Posts: 40
Registered: 17-10-2016
Member Is Offline
Mood: No Mood
|
|
Ya it's my channel, though it's been cleaned up a lot since it was first mentioned. I just remembered this forum today and realized it was a great
place to share my research.
As to heating the reactor and the reactors themselves, I bought mine on ebay for 40-100 bucks each. And a standard cooking oven works perfectly fine
as a heat source.
http://www.ebay.ca/itm/Hydrothermal-Synthesis-vessel-kettle-...
That's the one I have, though there are tons of sellers (mostly from china, because a) china and b) nanotech research is massive there)
|
|
|
j_sum1
Administrator
Posts: 6333
Registered: 4-10-2014
Location: At home
Member Is Online
Mood: Most of the ducks are in a row
|
|
Well thanks for that. I will keep an eye on any postings you make here and also peruse your channel from time to time. I don't think it is something
that I will get into any time soon but my students regularly express interest in nanoparticles (as does the textbook we use). If there is something
that looks like it might be a suitable project we might have someone interested in having a go.
Good to know that suitable equipment is not too pricey.
|
|
|
chironex
Harmless
Posts: 40
Registered: 17-10-2016
Member Is Offline
Mood: No Mood
|
|
If nanotech interested them then I've got lots they'll enjoy coming up. I'm actually gonna be teaching a course myself in january all about nanotech.
Hence the new and improved videos. I'll be covering lots of different nano techniques. Planning on doing a lot with organic and inorganic cryogels,
pyrolysis, graphene, nanotubes, hydrothermal and some STP chemical techniques as well as a bunch of biology and assorted other bits. So as I teach,
we'll film it and make it into videos.
I find that with nano tech everyone thinks its complex and inaccesible but honestly it's pretty straight forward and easy.
|
|
|
j_sum1
Administrator
Posts: 6333
Registered: 4-10-2014
Location: At home
Member Is Online
Mood: Most of the ducks are in a row
|
|
Sounds fantastic. Looks like I will be making some time to slowly work my way through your YT channel.
(As soon as I have finished rewatching chemplayer in order. It is rather fun.)
|
|
|
chironex
Harmless
Posts: 40
Registered: 17-10-2016
Member Is Offline
Mood: No Mood
|
|
i'd start with the newest and work backwards. Other than the fusor stuff from back in the day, the new videos are where I started doing actual
research and cleaned things up a bunch
|
|
|
chemplayer...
Legendary
Posts: 191
Registered: 25-4-2016
Location: Away from the secret island
Member Is Offline
Mood: No Mood
|
|
Glad you are still enjoying our channel! Looking back it was a crazy time and a lot of work, but lots of fun. Working on a wish-list for 'series 2'
but no promises on when it will be though.
|
|
|
j_sum1
Administrator
Posts: 6333
Registered: 4-10-2014
Location: At home
Member Is Online
Mood: Most of the ducks are in a row
|
|
@chemplayer
I watched nearly a dozen vids last night. That was enough work by itself - let alone producing them. It will be at least a year before I am in a
position to make my own videos. In the meantime, ideas are brewing.
And lest I hijack this thread - does anyone else have any experience of hydrothermal chemistry? It sounds interesting.
|
|
|
hyfalcon
International Hazard
Posts: 1003
Registered: 29-3-2012
Member Is Offline
Mood: No Mood
|
|
When he mentioned hydro-thermal chemistry, it got me thinking of hot springs as they age and go through different periods that deposit minerals of
varying compositions.
|
|
|
chironex
Harmless
Posts: 40
Registered: 17-10-2016
Member Is Offline
Mood: No Mood
|
|
I mean those reactions are what this technique basically replicates. One of the activities in that course I'll be running, after a week of learning
about and experimenting with these reactions will be to "fossilize" a seashell. Basically growing crystals and such on the shell to mineralize it
further and make it look cool. I'm really excited to see what people come up with. And since the crystals are all stable in water and air they should
be much harder to damage, unlike the usual crystal growing kits that'll just dissolve away.
|
|
|
chironex
Harmless
Posts: 40
Registered: 17-10-2016
Member Is Offline
Mood: No Mood
|
|
When I was first messing around with this technique I would pick a random mineral and then see if I could grow it. Though, every now and again I'd
make something, and have no idea what it is. These crystals for example, have been driving me crazy since I made them. I know they're some sort of
copper/graphene compound, but I can't figure out what it is. Far as I can tell, it's not in any literature. LINK TO IMAGE
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Wooo ! In one of your videos you mention using molten KOH to 'activate' carbon !
Any references to that process please ?
P.S. well made and interesting videos BTW.
|
|
|
chironex
Harmless
Posts: 40
Registered: 17-10-2016
Member Is Offline
Mood: No Mood
|
|
The most interesting use of molten hydroxide i've seen is this process for converting hemp to incredibly high energy density supercapacitor materials.
If you can't get access I can dig up the paper and share it
https://ecs.confex.com/ecs/228/webprogram/Paper59165.html
And thanks! glad you like them 
|
|
|
Texium
|
Thread Moved
27-11-2023 at 11:03 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
