NEMO-Chemistry
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1559
Registered: 29-5-2016
Location: UK
Member Is Offline
Mood: No Mood
|
|
Platinum foil
I cant remember which thread or the site that was linked (i need to chase it back down), but someone gave a link to a very good UK site that sold
metal foils.
I have also found an ebay seller that sells stainless steel mesh in many different kinds. These go from 2-3mm gaps between the holes to very fine
meshes.
I asked a jeweller in the town and he seems to think he can wrap platinum foil and seal it buy folding and bashing (my interpretation) around the
finer mesh grades.
This makes me think it might be possiable to use the mesh covered in platinum foil for making perchlorate's.
The site that was linked too had platinum foil of pretty good thickness for a pretty reasonable price.
Would this kind of approach work? I appreciate i would need to sort out a Tungsten connection etc for the power, but the foil looks like it might hold
up well if placed on a good rigid stainless backbone if the foil can be made 'water tight' and the stainless mesh dosnt come into contact with the
solution.
The bit that grabbed me was the mesh comes in 30cm X 30cm squares.
|
|
zwt
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 84
Registered: 1-8-2016
Member Is Offline
Mood: No Mood
|
|
|
|
NEMO-Chemistry
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1559
Registered: 29-5-2016
Location: UK
Member Is Offline
Mood: No Mood
|
|
Thanks for the link!!! What do you think of the idea of covering a fine mesh with the foil? as long as the mesh can be covered with joined foils?
Somehow i cant get firefox bookmarks in any kind of reasonable order! they all end up in one huge list!!
I appreciate the effort finding it for me.
[Edited on 13-8-2016 by NEMO-Chemistry]
|
|
zwt
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 84
Registered: 1-8-2016
Member Is Offline
Mood: No Mood
|
|
I think you're on the right track; it's far too thin to be used as an electrode by itself.
I suspect the main problem will be adhering the foil to the substrate. If any solution gets between the platinum and the stainless steel, it will
passivate, and you'll eventually (or rapidly) lose conduction. Of course, the only electrodes I've used are gouging carbons and laserred's MMO mesh,
though I did get ripped off buying the same "platinized titanium" NurdRage bought. Personally, I'd try folding the platinum on itself to increase the
thickness, or wrapping it around a plastic or titanium rod (ensuring at least two thicknesses around the entire circumference), keeping the connection
to the power supply above the level of the solution. Alas, it seems they don't ship outside Europe, and I haven't found a comparable supplier for the
US.
[Edited on 13-8-2016 by zwt]
|
|
NEMO-Chemistry
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1559
Registered: 29-5-2016
Location: UK
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by zwt ![](images/xpblue/lastpost.gif) | I think you're on the right track; it's far too thin to be used as an electrode by itself.
I suspect the main problem will be adhering the foil to the substrate. If any solution gets between the platinum and the stainless steel, it will
passivate, and you'll eventually (or rapidly) lose conduction. Of course, the only electrodes I've used are gouging carbons and laserred's MMO mesh,
though I did get ripped off buying the same "platinized titanium" NurdRage bought. Personally, I'd try folding the platinum on itself to increase the
thickness, or wrapping it around a plastic or titanium rod (ensuring at least two thicknesses around the entire circumference), keeping the connection
to the power supply above the level of the solution. Alas, it seems they don't ship outside Europe, and I haven't found a comparable supplier for the
US.
[Edited on 13-8-2016 by zwt] |
Surely someone in the Europe would be willing to get some for you and ship it over, ok that is 2 lots of shipping but the weight is low and it would
not be a complete porky to describe it as a metal foil sample on the customs form .
I dont live near a proper office so use couriers, but as long as you can wait a couple of weeks for postings i would do it.
I am not ordering mine until i chat with the guy who is going to mesh it to the mesh. but once i order some i would ship it for you.
Ironically getting decent reasonable price MMO in the UK is not easy!
Plus you have pool shops!! Not something at all common in Scotland! I envy the pool shops and the chemists delights they hold at good prices lol
[Edited on 13-8-2016 by NEMO-Chemistry]
|
|
NEMO-Chemistry
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1559
Registered: 29-5-2016
Location: UK
Member Is Offline
Mood: No Mood
|
|
I forgot the ebay link to the mesh they sell, they have a great range of various sizes.
http://www.ebay.co.uk/itm/Woven-Wire-Mesh-Sheet-15cm-and-30c...
|
|
j_sum1
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 6257
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
Quote: Originally posted by j_sum1 ![](images/xpblue/lastpost.gif) |
Here you go.
https://www.goldleafsupplies.co.uk/
I have not purchased from them but am impressed with the range they stock. Pt leaf seemed like a good idea for element collection and may have other
uses. High surface area is not to be sneezed at.
Tin leaf and other metals might have its uses too.
[/off topic] If anyone wishes to continue this line of discussion then maybe start a new thread and quote this post. |
My apologies. I was very conscious when I posted that link that it was in the wrong location, but didn't really have enough to say to justify opening
a new thread. I am glad someone has. I would be very interested to see what this product is like. It is a shame that they do not deliver
internationally. But if the product is good then there is always a workaround. Pt foil seems like it would be a good addition to an element
collection and may have other uses too.
As far as electrodes go, I would be very conscious of liquid getting between the Pt and the substrate with rather negative effects. I can't see any
way around that. I suspect a stiff rod would fare better than a mesh -- you cannot improve the surface area using a mesh. The SA is determined by
the foil you are using. An inflexible and smooth substrate is going to hold the platinum better. But ultimately you would want to electrodeposit you
Pt onto something. That is a process that I know nothing about. And I suspect that it would be difficult to beat the economics or quality of
electrodes commercially available.
|
|
NEMO-Chemistry
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1559
Registered: 29-5-2016
Location: UK
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by j_sum1 ![](images/xpblue/lastpost.gif) | Quote: Originally posted by j_sum1 ![](images/xpblue/lastpost.gif) |
Here you go.
https://www.goldleafsupplies.co.uk/
I have not purchased from them but am impressed with the range they stock. Pt leaf seemed like a good idea for element collection and may have other
uses. High surface area is not to be sneezed at.
Tin leaf and other metals might have its uses too.
[/off topic] If anyone wishes to continue this line of discussion then maybe start a new thread and quote this post. |
My apologies. I was very conscious when I posted that link that it was in the wrong location, but didn't really have enough to say to justify opening
a new thread. I am glad someone has. I would be very interested to see what this product is like. It is a shame that they do not deliver
internationally. But if the product is good then there is always a workaround. Pt foil seems like it would be a good addition to an element
collection and may have other uses too.
As far as electrodes go, I would be very conscious of liquid getting between the Pt and the substrate with rather negative effects. I can't see any
way around that. I suspect a stiff rod would fare better than a mesh -- you cannot improve the surface area using a mesh. The SA is determined by
the foil you are using. An inflexible and smooth substrate is going to hold the platinum better. But ultimately you would want to electrodeposit you
Pt onto something. That is a process that I know nothing about. And I suspect that it would be difficult to beat the economics or quality of
electrodes commercially available. |
I agree with what your saying, i saw it as a cheap way to get a job done .
I am not 100% sure how to explain any better the way the foil will be attached. I think i need to go back and ask again.
From what i gather the guy is going to roll the foils together with a crimped type fold, he didnt find it easy to explain to me but he is fully aware
of what i want it for.
He is confident it can be done and he only wants £5 for doing it! The mesh was his idea, apparently if we pick the right mesh then the foil gets
pushed into it (very bad description!).
I intended to use fairly small squares so only 2 foils per electrode are needed. Cost wise this would make it very cheap, i did consider ebay but alot
of them seem to be rip offs! I cant afford a mistake like that.
I wanted a graphite rod first, it was the jeweller who said wrapping the foil around a graphite rod wasnt going to give a good seal.
So no idea........But for the money it has to be worth a shot, i am hoping if it fails then the platinum can still be dissolved and used as a plating.
That site has some great products! A really great find. I will let you know how it goes.
|
|
careysub
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
How about platinized titanium electrodes commonly used in jewelry rhodium plating? They are also used in various electrolysis processes.
You can get them cheap on eBay from China, but Nurdrage got a fake one once. Buying from an actual jewelry supply place probably guarantees authentic
ones.
|
|
NEMO-Chemistry
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1559
Registered: 29-5-2016
Location: UK
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by careysub ![](images/xpblue/lastpost.gif) | How about platinized titanium electrodes commonly used in jewelry rhodium plating? They are also used in various electrolysis processes.
You can get them cheap on eBay from China, but Nurdrage got a fake one once. Buying from an actual jewelry supply place probably guarantees authentic
ones. |
I also got a fake ebay one, which is what put me off getting another, i paid a fair bit for it.
I also wanted something that would fit nicely into the 'reactor' i am building, a square fits nicely and allows the current to be adjusted by use of a
nylon threaded rob.
I also thought the price for the foil was really good and a cheap way to get a decent electrode.
There is 5 leaves of platinum in the book, so two for my trial and if that dosnt work out i have 3 left to try another method.
the beauty of the way the guy intend to fix the foils is that they can be scrapped off easily and used for plating (if i find out how!).
I am also trying MnO2 Anodes and lead nitrate ones (when i make them), the hard part has been sourcing lead!!
Unbelievable how difficult its been to get even small amounts of pure lead around here. It was expensive (relative) but i ended up buying plant
weights from an aquatics shop!!
They sell small lead strips in a small container to weigh down aquatic plants, you would think it was gold the price they charge for such tiny amounts
lol.
|
|
zwt
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 84
Registered: 1-8-2016
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by careysub ![](images/xpblue/lastpost.gif) | How about platinized titanium electrodes commonly used in jewelry rhodium plating? They are also used in various electrolysis processes.
You can get them cheap on eBay from China, but Nurdrage got a fake one once. Buying from an actual jewelry supply place probably guarantees authentic
ones. | You could potentially make 5 beaker-sized platinum electrodes for about $30 with the 5-pack of
platinum foil offered by the seller linked above, using the method of wrapping it around a rod suggested by j_sum1 and I. I haven't seen a platinized
titanium anode that seemed legitimate for under $30, and I wouldn't consider this source legitimate except it has already been vouched for:
[Edited on 14-8-2016 by zwt]
|
|
careysub
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
Here is a wild and crazy idea for constructing a platinum electrode using platinum foil.
Use a glass tube, epoxy a copper wire down to where you want the contact with the foil to occur.
Coat the bottom of the tube with electrically conductive epoxy. NOT thermally conductive electrically insulating epoxy! Use the phrase: "electrically
conductive" epoxy, with the quotes on eBay for a list.
Wrap the foil around the tube. Exposure of the epoxy through the foil edge should be minimal but some suitable inert edge sealant could be applied.
|
|
zwt
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 84
Registered: 1-8-2016
Member Is Offline
Mood: No Mood
|
|
Sounds complicated. I would just wrap the foil around a suitable rod (perhaps a glass stirring rod, or plastic, or titanium), and use a piece of
heat-shrink tubing to secure the foil to the rod and a stranded nickel-plated-copper wire against the foil. With such a design, the connection must be
kept above the solution, but it should work for my needs. I suspect ANY conductive material that isn't based on platinum-group metals will passivate
or corrode under anodic pressures, even if coated with an "inert edge sealant". Most "sealants" fail quickly when exposed to the conditions of a
running chlorate cell or similar.
By my math, wrapping the foil around a 5mm diameter glass stirring rod will give 5 thicknesses around the circumference, which should be enough to
pass a reasonable current. It doesn't matter much if the solution gets between the layers of platinum, or between the platinum and the substrate, as
long as the substrate is inert and you don't depend on its conductivity.
[Edited on 14-8-2016 by zwt]
|
|