Pages:
1
..
55
56
57
58
59
..
104 |
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Quote: Originally posted by glymes ![](images/xpblue/lastpost.gif) | Why is it that there are a lot of organic nitrates (nitrotoluene, nitrobenzene etc.) but virtually no chlorates of the same ilk? This interests me.
|
Nitrobenzene is not an organic nitrate; phenyl nitrate would have an oxygen between the carbon and the oxygen.
Perchlorylbenzene does exist (http://pubs.acs.org/doi/abs/10.1021/i360060a011 ), but it takes courage to work with such materials.
Prep: https://books.google.ca/books?id=vD-qCgAAQBAJ&pg=PA624&a...
Who the hell wants to work with perchloryl fluoride in order to make the compound?
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Nitrotoluene and nitrobenzene are not nitrates, they are nitro-compounds.
Nitrates have structure R-O-NO2.
Nitro's have structure R-NO2
Nitrites have structure R-O-NO (isomers of nitro's)
Organic nitrates are not that stable. There are a few (e.g. glycerine trinitrate) but these are sensitive explosive compounds.
Organic chlorates simply are too unstable to exist. Chlorate only is stable in ionized form, as ClO3(-). The covalent HClO3 does not exist, chloric
acid only exists in aqueous solution up to appr. 40% in which it is fully ionized to H3O(+) and ClO3(-). Organic chlorates would be covalent and hence
they are so unstable that in practice they do not exist at room temperature.
The ionization of chlorate stabilizes the ions by means of resonance. The covalent chlorates do not have this advantage.
A similar thing exists for perchlorates. Ionic perchlorates are very stable, covalent perchlorates are unstable. E.g. anhydrous HClO4 does exist, but
is extremely dangerous, as it can explode without apparent reason. Aqueous HClO4 on the other hand is quite inert and hardly shows oxidizing
properties, just acid properties.
There are a few organic perchlorates though. Someone on sciencemadness has actually done some experiments with organic covalent perchlorates. IIRC
this was user axt, who did experiments with ethylperchlorate. I myself have made quite a few organic perchlorates, but all of these are salts of
amines, or complexes of metals with organic ligands, with the perchlorate ion as anion.
|
|
glymes
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 53
Registered: 16-5-2016
Member Is Offline
Mood: Fiddly
|
|
AXT had the ethyl perchlorate 'spoon shot' didn't he (where a drop of ethyl perchlorate blew a metal spoon out of his hand?) Ethyl perchlorate looks
very nasty.Apparently, methyl perchlorate is more unstable, more explosive and around as toxic as dimethyl mercury.
|
|
TinSandwich
Harmless
Posts: 29
Registered: 24-2-2016
Member Is Offline
Mood: No Mood
|
|
Why do alchemical manuscripts always show tons of different still head while we modern chemists only have one and a couple different condensers?
Photos: "1606" https://en.wikipedia.org/wiki/File:Alembics_from_Andreas_Lib... "2016" https://commons.wikimedia.org/wiki/File:Simple_distillation_...
|
|
Jstuyfzand
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 166
Registered: 16-1-2016
Location: Netherlands
Member Is Offline
Mood: Learning, Sorta.
|
|
When So2 gets dissolved in water it forms the unstable sulfurous acid, what does it decompose into if it is unstable?
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Quote: Originally posted by Jstuyfzand ![](images/xpblue/lastpost.gif) | When So2 gets dissolved in water it forms the unstable sulfurous acid, what does it decompose into if it is unstable? |
Sulphur dioxide and water.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
Jstuyfzand
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 166
Registered: 16-1-2016
Location: Netherlands
Member Is Offline
Mood: Learning, Sorta.
|
|
Thank you
|
|
mintreina
Harmless
Posts: 6
Registered: 22-9-2015
Member Is Offline
Mood: No Mood
|
|
Question
Does an iron nail displace cobalt ions from CoSO4 solution?
Will it form FeSO4 and Co metal?
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Cobalt(ii)'s standard reduction potential is -0.28 V, and iron(ii)'s is -0.44 V.
Therefore, yes.
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3631
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
TinSandwich
It looks to me that some are simple still heads, also I see equivalents to;
. anti-splash function
. fractionating function
. condensing/refluxing function
it appears that some were for specific processes such as mercury distillation,
just as some manufacturing stills look quite different from lab versions.
if anything we now have more complex arrangements;
flask capacity, shape, wall thickness, number and type of neck
column types
still adapter types
condenser types
take-off types
receiving flasks
rotovaps, pig adapters, stirrers, perkin triangles, pressure-equalised funnels ..............
I want ALL of them ![:D](./images/smilies/biggrin.gif)
and I think an alchemist of times gone bye would freak out if he was given a Quickfit catalogue to choose from ![:o](./images/smilies/shocked.gif)
[Edited on 23-5-2016 by Sulaiman]
|
|
hissingnoise
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
Quote: | Quote: | When So2 gets dissolved in water it forms the unstable sulfurous acid, what does it decompose into if it is unstable? |
Sulphur dioxide and water. |
Sulphurous acid is unstable because air slowly oxidises it to H2SO4!
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
What for ?
|
|
The Volatile Chemist
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
I thought at first he was wanting all of the styles of stillheads combined. that would be a sight to see...
|
|
RogueRose
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1590
Registered: 16-6-2014
Member Is Offline
|
|
Distilling - question about condenser
I'm curious how to tell whether all the gases that come through a condenser and out any "extending" hose has captured all available liquids/gases.
Let's use ethanol as an example. The temp of the condenser is 70 degrees F and the temp of the gas coming out the end of the 12" hose at the end is
85-115 F.
The thing is that at times when distilling I'll hold the hose in a "U" shape, fill it with condensate, and watch to see if gas vapors pass/push
through.
It seems that at times the gas pushes through and I see a mist on the collecting vessel but the temp is 100F where the evap point is ~170.
Is it possible that there is still something in gaseous form at those temps?
|
|
The Volatile Chemist
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
Well, when you boil water, it can condense in the air as a mist....but if the so-called mist is a gas still (punintended), then it's possible the gas
simply hasn't liquified yet. Cooling down and condensing and coalescing into a liquid in a flask take time.
|
|
Emlingur
Harmless
Posts: 7
Registered: 10-4-2016
Location: Iceland
Member Is Offline
Mood: No Mood
|
|
Seperation of sodium sulfates
I have a mixture of sodium sulfate and sodium bisulfate, the former of about 5% by weight. I need to get rid of those 5%, and I was wondering if there
was a solvent that only one of these two is soluble in, or if I have to do a recrystallization, and if so, which solvent would be preferrable to do
so.
|
|
Praxichys
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline
Mood: Coprecipitated
|
|
Make a solution of your contaminated bisulfate and add excess sulfuric acid. From this solution you will be able to crystallize sodium bisulfate of a
higher purity. There will always be a tiny equilibrium of sodium sulfate that will coprecipitate, although a large excess of acid will make this
negligible.
Why do you need pure sodium bisulfate? When dissolved it acts as 1eq of sodium sulfate mixed with 1eq of sulfuric acid. Unless you need it for very
precise measurements like a titration (and this is a bad standard to use, by the way) you can always just calculate the excess you need to add to
complete a reaction and not bother purifying it.
|
|
Emlingur
Harmless
Posts: 7
Registered: 10-4-2016
Location: Iceland
Member Is Offline
Mood: No Mood
|
|
The sodium bisulfate will be dehydrated and then cracked to generate sulfur trioxide, although maybe the sodium sulfate will not have any effect on
the process, but I'm not sure.
|
|
RogueRose
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1590
Registered: 16-6-2014
Member Is Offline
|
|
Is it possible to have a condenser that is too big (not like for distilling 200 gal w/ a 1L run) but something that may serve a 30L setup used in a
4-5L run?
|
|
RogueRose
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1590
Registered: 16-6-2014
Member Is Offline
|
|
Calculating moles of Acetic Acid in vinegar solution
This gets confusing to me when trying to figure out how much of something is in a solution with water.
The vinegar is 20% "200 grain" and 3785ml.
Acetic Acid 60g/mole & density of 1.049g/ml
3785ml @ 20% = 757ml
757ml @ 1.049g/ml = 794g
794g Acetic Acid @ 60g/mole = 13.234 moles
The math is correct but I'm not sure if my method is correct. Is this an accurate way of determining how many moles per gallon? I didn't weigh
anything but only took the printed info for my numbers.
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Your math is correct, but most of the vinegar I've seen is 5% v/v, which works out to almost exactly 1 mol/L.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
Texium
|
Threads Merged 27-5-2016 at 20:47 |
Texium
|
Threads Merged 27-5-2016 at 20:48 |
Texium
|
Threads Merged 27-5-2016 at 20:53 |
Deathunter88
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 513
Registered: 20-2-2015
Location: Beijing, China
Member Is Offline
Mood: No Mood
|
|
Vacuum Gauge Noobness
Hello everyone, I have decided to buy a vacuum gauge so I can finally get into vacuum distillation. However, there are so many types of vacuum and so
many units that I get hopelessly lost when trying to pick one. Attached is a photo of one that I plan to get, would this be good for most vacuum
distillations?
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4547
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Well, that looks like a decent gauge, and it does cover roughly the range that you need (-.1 MPa is pretty much full vacuum). However, from what I've
seen MPa is not a unit you see used that often in chemistry papers or on this site, so you might find yourself converting a lot. Getting one that
covers the same range but in mmHg (torr) would be easier as far as that goes as it is used more widely. Should read 0 to -760.
|
|
Ba(ClO3)2
Harmless
Posts: 33
Registered: 30-4-2016
Member Is Offline
Mood: No Mood
|
|
Would boiling a solution of sodium hydroxide with antimony trioxide result in a solution of sodium meta-antimonite ?
Sb2O3 + 2 NaOH ==> 2 NaSbO2 + H2O
If an excess of antimony trioxide were used then presumably a fairly pure solution of sodium meta-antimonite could be obtained?
The excess antimony trioxide would be easy to remove (filtration).
Come to think of it, is sodium meta-antimonite even stable in solution?
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3631
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Quote: Originally posted by Deathunter88 ![](images/xpblue/lastpost.gif) | Hello everyone, I have decided to buy a vacuum gauge so I can finally get into vacuum distillation. However, there are so many types of vacuum and so
many units that I get hopelessly lost when trying to pick one. Attached is a photo of one that I plan to get, would this be good for most vacuum
distillations? |
I have one almost identical, the scale does not matter to me
because pressure is reported in different units by different reporters,
all you have to do is convert for recommended values then
keep notes in whatever units your gauge works.
This type of gauge is good for a rough estimate of vacuum,
as you get towards -0.1Mpa it is useless as a measure of absolute pressure,
they measure the difference between the pipe pressure and ambient atmospheric pressure, inaccurately,
but I consider it useful (especially for vacuum filtering) and good value.
I have not got a reliable low pressure (1 pa area) gauge yet ..... cost more than my pump !
|
|
Pages:
1
..
55
56
57
58
59
..
104 |