RogueRose
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1590
Registered: 16-6-2014
Member Is Offline
|
|
Making a extra heavy duty laundry stain remover / pre-treat spray
I'm trying to come up with some things that may work really well together and I'm all up for ordering whatever is needed. I'd like to put this in a
spray bottle for treating clothing and possibly carpet if it is safe.
I have the following
Sodium percarbonate - Na2CO3 * 2(H2O2) (at least I think it is dihydrate, there is only one option I think)...
Sodium carbonate - anhydrous & mono hydrate
Trisodium Phosphate (pretty sure it is 75% Na3(PO4)2 & 25% Na2CO3)
33% H202
Baking Soda
FellsNaptha soap
Chlorox bleach
TCCA tablets
Calcium hyprochlorite 56% & 64% powder
Oxyclean "Triple clean" liquid treatment
Borax
Ethanol
Methanol
IPA
Tolulene
Xylene
Acetone
Vinegar
Barkeepers Friend (or companion...?)
Comet
Urea
Sodium Metabislfite
Tons of Homemade Coconut oil soap (hard as a brick)
Tons of Homemade Palm Kernel oil soap (hard as a brick)
HCl
H2SO4
NaOH
KOH
There are more, but I don't think any of the othes would come close to working here. I know a lot of these are a LONG shot in possibly helping, but I
thought maybe they might catalyze something or turn on a light bulb.
I was thinking of at least mixing the Sodium PerCarb * 2(H2O2) with TSP, adding some FelsNaptha shavings, heating until dissolved adn then add water
if needed to spray.
Anyone have an other god ideas about how to do this or what to add/not add?
|
|
TinSandwich
Harmless
Posts: 29
Registered: 24-2-2016
Member Is Offline
Mood: No Mood
|
|
I heard hexane works pretty well for stains, I was actually able to get a small bottle of it from a local hardware store (it just says stain remover,
and it's pure hexane) I never tried using it on stains though, I just bought it because I like hydrocarbons and I had never seen it anywhere else.
I don't know much about this topic but I think it would be great if you could find something to hydrolize the fats (from an oil stain or something)
without eating away the fabric (so no acid/base hydrolisis involving strong acid/bases). It probably would be a good solution for treating very
stubborn stains (hydrolize, wash away glicerol with water, wash away the fatty acid with another solvent, done)
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
I've used petroleum ether on stains with some success. Some washing machines can't handle it, but a hundred mL of pet ether in the wash will remove
tar, sticky road dust, and rubber stains with ease.
|
|
halogen
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 372
Registered: 18-4-2004
Member Is Offline
Mood: No Mood
|
|
Just remember that, surprisingly, hexane is toxic. This is because of its metabolic product.
F. de Lalande and M. Prud'homme showed that a mixture of boric oxide and sodium chloride is decomposed in a stream of dry air or oxygen at a red heat
with the evolution of chlorine.
|
|
TinSandwich
Harmless
Posts: 29
Registered: 24-2-2016
Member Is Offline
Mood: No Mood
|
|
Yes I know it is. I bought it because it was cheap but i don't think I'm going to use it for much...I wanted to chlorinate it but that would make it
10 times more dangerous. I wont mess with it for now.
|
|
Cryolite
Harmless
Posts: 15
Registered: 20-4-2016
Member Is Offline
Mood: No Mood
|
|
I'm actually somewhat surprised hexane is still sold as a stain remover-- I thought it was entirely replaced with heptanes in consumer uses, due to
similar chemical properties and lack of 2,5-hexanedione related toxicity.
Speaking of heptanes, there are several easy OTC sources. One is Bestine solvent, which according to the MSDS (http://archpdfs.lps.org/Chemicals/Solvent-and-Thinner_Bestin...) is pure n-heptane. Another source is starter fluid: most start fluid brands are a
mixture of diethyl ether and mixed heptanes, which can easily be separated by distillation. Heptane would likely be as good a solvent as hexane for
cleaning purposes, but the diethyl ether from starter fluid might be even better, due to being nonpolar but somewhat water soluble.
|
|
alive&kickin
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 100
Registered: 10-11-2012
Member Is Offline
Mood: No Mood
|
|
Slightly off topic but I have to ask TinSandwich. Stain remover, pure hexane. Would love to find some. Please, do tell.
|
|
TinSandwich
Harmless
Posts: 29
Registered: 24-2-2016
Member Is Offline
Mood: No Mood
|
|
It was just some no brand stain remover. A small transparent bottle simply stating "stain remover" and "hexane" on the label. Not in the US. It's
quite common for me to find no brand chemicals that just state their exact composition on the bottle.
To make you even more salty I just found 35% h2o2 in a department store , it
was even cheaper than the 3%.
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3634
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
RogueRose
I'm no expert but I believe that there are different 'removers' for different stains on/in different materials,
The idea: you can't patent it because I published it here, any patent or copyright is mine. ![:D](./images/smilies/biggrin.gif)
A solution calculator + solution mixer.
Input suspected materiel to be cleaned and stain type
Output to automatic custom solution mixer.
For volume users or suppliers:
Like a coffee machine but push the buttons for input and get specific solution to your problem,or via data-link.
For low volume users;
Manual lookup table(s) rotating disks etc.,
or apps. etc ,lookup for mixing recipie,
and a kit of common quantities of magic cleaning ingredients....etc.
Label the ingredients in a cryptic manner, e.g. A, B, C, D,... i,ii,iii,iv etc.
because the value is in the lookup table(s), database etc. ![:cool:](./images/smilies/cool.gif)
Or just build the database and let people access it in a user-friendly intuitive way for free or a fee.
[Edited on 17-5-2016 by Sulaiman]
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Sulaiman:
I recall seeing a patent on a database for oxidative path to bleaching, stain remover,...
Good idea, but I would not pursue it as any profits received may be sought by the patent holder.
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Remember, there is a trade-off between the stainer remover's effectiveness and damage/weakening to the fabric.
For a very expensive garment, you need a delicate stain remover. In the case of a cheap rug, which is not washed often, effectiveness is key.
[Edited on 25-5-2016 by AJKOER]
|
|