Funkerman23
Hazard to Others
Posts: 416
Registered: 4-1-2012
Location: Dixie
Member Is Offline
Mood: No Mood
|
|
Perkins triangle frustrations..
This isn't the first time I've gone round and round on this but why are they so bloody elusive? For the unaware, this is an adapter for vacuum
distillations that allows you to change flasks without loosing vacuum. Has anyone here ever found one by luck or had a buddy at ace glass? I have yet
to see any Chinese glassblowers make a copy either.. with the possible exception of one Canadian seller ( forgot the name ). I get that for most
people the udder & flasks is preffered but still.. Anybody else out there look for one( or other apparently Obscure) adapter and have luck? Any
tips on finding one without selling an arm & leg? Pardon me if this isn't to standards but this is kicking my backside. I am aware the Quick-fit
ones are more common but between overseas shipping and leaking joint adapters it is less than appealing( that and the cost is still 300 plus as of
last sighting).
agghh!!
" the Modern Chemist is inundated with literature"-Unknown
|
|
|
byko3y
National Hazard
Posts: 721
Registered: 16-3-2015
Member Is Offline
Mood: dooM
|
|
I have no idea why somebody would need this adapter. For most cases spider adapter does the job.
|
|
|
Marvin
National Hazard
Posts: 995
Registered: 13-10-2002
Member Is Offline
Mood: No Mood
|
|
I don't understand what you are asking for.
http://www.gblaboratoryequipment.co.uk/ra633-intermediate-pe...
This looks like a much better version to me.
Part of your problem may be that the "Perkin triangle" looks to be a British term.
|
|
|
Dr.Bob
International Hazard
Posts: 2678
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Are you looking for one in 24/40? I may still have one somewhere. I used to have several similar ones to that. I'll take a look, and I can set
a reasonable price.
|
|
|
macckone
International Hazard
Posts: 2160
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
This can be replicated with a three way valve, A seperatory or
addition funnel, and a couple of vacuum adapters (one 105 degree
and one straight). Set up the funnel as the collection flask. With
the 105 degree adapter as normal for a vacuum distillation.
Then place the straight through vacuum adapter at the bottom of
the funnel.Then attach the three way valve to your vacuum
manifold and your inert gas source. The trick is to slowly open the
three way valve to the vacuum manifold so you don't lose
suction. The only thing special needed is a seperatory or addition
funnel with the correct fittings on top and bottom. A pressure
equalizing addition funnel is not useful for this as you don't want
the pressure equal.
ps. They are probably not made much because they can be
constructed from readily available parts that most labs can
use for multiple purposes. For large scale production lab glass
wouldn't be used.
[Edited on 9-9-2015 by macckone]
|
|
|
Funkerman23
Hazard to Others
Posts: 416
Registered: 4-1-2012
Location: Dixie
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Dr.Bob  | | Are you looking for one in 24/40? I may still have one somewhere. I used to have several similar ones to that. I'll take a look, and I can set
a reasonable price. |
in 24 /40 yes. I don't know what kind of chemist has such the array you do but it might
be worth looking into degree-wise but I digress.
As to why need one: well in truth I'd need a spider adapter as well, given have neither.. but as too many here can attest; sometimes you have to
make your own reagents if you want to experiment.
I also just collect labglass. Its a strange aside to a chemistry career but well made glass is a sight to behold. Given all the vices of the world,
collecting glassware should be too worrisome.
" the Modern Chemist is inundated with literature"-Unknown
|
|
|
j_sum1
Administrator
Posts: 6245
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
Ahhh. For the glassware collection.
I have no need for one of these and would not really know what to do with it if I had one. But I have to admit that it looks really cool!
|
|
|
Funkerman23
Hazard to Others
Posts: 416
Registered: 4-1-2012
Location: Dixie
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by macckone | This can be replicated with a three way valve, A seperatory or
addition funnel, and a couple of vacuum adapters (one 105 degree
and one straight). Set up the funnel as the collection flask. With
the 105 degree adapter as normal for a vacuum distillation.
Then place the straight through vacuum adapter at the bottom of
the funnel.Then attach the three way valve to your vacuum
manifold and your inert gas source. The trick is to slowly open the
three way valve to the vacuum manifold so you don't lose
suction. The only thing special needed is a seperatory or addition
funnel with the correct fittings on top and bottom. A pressure
equalizing addition funnel is not useful for this as you don't want
the pressure equal.
ps. They are probably not made much because they can be
constructed from readily available parts that most labs can
use for multiple purposes. For large scale production lab glass
wouldn't be used.
[Edited on 9-9-2015 by macckone] |
Please pardon my asking but have you tried this setup yourself and had it
work?( I am genuinely asking, not trying to be rude)Was the vacuum loss manageable? A few 3 way stopcocks and some tubing is a lot cheaper seeing as
I only lack the 3 way valve. Thanks to another seller here, J2xP( who is has disappeared sadly) I have a full 24/40 corning kit so I have a non
equilibrium funnel already. He and Dr bob are saints to this little forum.
" the Modern Chemist is inundated with literature"-Unknown
|
|
|
macckone
International Hazard
Posts: 2160
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Yes it works. The trick is that some vacuum will be lost when switching over the three way valve. If you do it slowly it isn't a problem. Three way
valves are cheap and depending on your reactants may not need glass and teflon. Glass and teflon are $40 on ebay but others are $10.
|
|
|
macckone
International Hazard
Posts: 2160
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Ps if vacuum loss is a problem then one additional three way valve give exactly the same functionality as the Perkins triangle.
[Edited on 13-9-2015 by macckone]
|
|
|
careysub
International Hazard
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
| Quote: Originally posted by macckone | | Yes it works. The trick is that some vacuum will be lost when switching over the three way valve. If you do it slowly it isn't a problem. Three way
valves are cheap and depending on your reactants may not need glass and teflon. Glass and teflon are $40 on ebay but others are $10.
|
Is this what you are thinking of (the only glass three-way valve I find on eBay):
http://www.ebay.com/itm/GL98-PYREX-No-7382-GLASS-w-PTFE-PLUG...
I find no three way ST glass valves on eBay or on the Laboy site.
|
|
|
macckone
International Hazard
Posts: 2160
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Yes that is what I was thinking of.
The $10 ones are pvc and for water.
You can probably find ones of other materials
like LDPE, HDPE or PP.
PVC will work for a lot of things but
not for a large number of solvents.
Here is another one on ebay that costs less:
http://www.ebay.com/itm/Kontes-T-Bore-Tee-Three-Arm-with-Gla...
Here is another model:
http://www.finemech.com/mm5/4.24/normag_datasheets/4.5.jpg
Not sure of cost or availability on that one.
Here are some manifolds that are not cheap:
http://unitedglasstech.com/Manifolds.htm
The three place is quite useful but I don't currently have one.
Another source without prices:
https://www.wilmad-labglass.com/ProductList.aspx?t=1153
I don't know if wilmad sells to individuals, but unitedglasstech does.
|
|
|
macckone
International Hazard
Posts: 2160
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Here is a cheaper one, but it is 2mm
http://www.ebay.com/itm/2mm-KIMAX-T-Bore-Glass-Stopcock-NOS-...
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
