Velzee
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 381
Registered: 19-8-2015
Location: New York
Member Is Offline
Mood: Taking it easy
|
|
Is there anyway to purify MgSO4 that contains fragrance oils?
Last time I tried to make anhydrous MgSO4 (to use as a desiccant) by heating pot of it on the stove, but an overwhelming smell of the fragrances
flooded my apartment and nearly suffocated my family and myself. Is there a way to separate the MgSO4 from the oils? Here are the list of ingredients
included in the Espom salt:
![Hwe4ZuX.jpg - 693kB](https://www.sciencemadness.org/whisper/files.php?pid=417484&aid=43113)
Thank you in advance!
Check out the ScienceMadness Wiki: http://www.sciencemadness.org/smwiki/index.php/Main_Page
"All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident."
—Arthur Schopenhauer
"¡Vivá Cristo Rey!"
—Saint José Sánchez del Río
|
|
Praxichys
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline
Mood: Coprecipitated
|
|
The easiest way might be to bake the oils out. Mostly MgSO4 is used for drying in the lab and has to be baked first to remove water.
I say bake it to death as high as the oven goes for an hour or so. If the oils cause browning of the product, dissolve it, filter (to trap the carbon
particles), evaporate, and re-bake.
You could also try extracting the oils with a solvent but you will lose a lot and it will be messy.
|
|
MrHomeScientist
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
If they actually are oils, I'd think dissolving in water and decanting the floating oil would be easiest. Then evaporate to crystallize, and heat in
the oven until anhydrous.
Trying to heat to decomposition surely would leave a dirty carbon-contaminated product and produce lots of smells (as you saw). Not that carbon would
interfere with drying, of course, but I'd prefer a pure product since it seems like a pretty easy separation to me.
|
|
Velzee
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 381
Registered: 19-8-2015
Location: New York
Member Is Offline
Mood: Taking it easy
|
|
Quote: Originally posted by MrHomeScientist ![](images/xpblue/lastpost.gif) | If they actually are oils, I'd think dissolving in water and decanting the floating oil would be easiest. Then evaporate to crystallize, and heat in
the oven until anhydrous.
Trying to heat to decomposition surely would leave a dirty carbon-contaminated product and produce lots of smells (as you saw). Not that carbon would
interfere with drying, of course, but I'd prefer a pure product since it seems like a pretty easy separation to me. |
And what if the "oils" don't simply float to the top? I just made a saturated solution a few minutes ago, but I do not see a distinct layer:
Check out the ScienceMadness Wiki: http://www.sciencemadness.org/smwiki/index.php/Main_Page
"All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident."
—Arthur Schopenhauer
"¡Vivá Cristo Rey!"
—Saint José Sánchez del Río
|
|
Praxichys
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline
Mood: Coprecipitated
|
|
@MrHomeScientist - I had originally though that too, but there probably won't be enough oil to float. It will end likely up as an emulsion/solution,
especially since a lot of those fragrance oils are pretty dense. Carvone and eucalyptol, for instance, are pretty close to 1, and their oxygen content
makes them polar enough to dissolve in water just enough to keep everything contaminated. There also exists the problem of the likely air-oxidation
that has happened to those oils, likely forming very tiny amounts of gummy crap that clog filters easily.
If you get lucky you might reduce the oils by dissolving and drying a few times, but pyrolysis is the easiest 1-step guarantee. It does no favors to
the kitchen, however.
I suppose one could make a saturated solution and extract with a nonpolar solvent many times. Or, perhaps recrystallizing from water and decanting a
significant portion of the liquor which would hopefully retain the oils. It's a tricky situation for sure. I'd like to know what works!
EDIT: Dang it, posted at the same time.
[Edited on 28-8-2015 by Praxichys]
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4299
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
That's too cloudy to be a solution. Let it sit for an hour or so, see if anything floats or settles out.
I'd actually try stirring it with isopropanol. It shouldn't dissolve much MgSO4, but will dissolve the oils.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
Velzee
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 381
Registered: 19-8-2015
Location: New York
Member Is Offline
Mood: Taking it easy
|
|
Quote: Originally posted by DraconicAcid ![](images/xpblue/lastpost.gif) | That's too cloudy to be a solution. Let it sit for an hour or so, see if anything floats or settles out.
I'd actually try stirring it with isopropanol. It shouldn't dissolve much MgSO4, but will dissolve the oils. |
About an hour after adding some isopropanol, the solution remains cloudy, with the exception of a ~1mm thick "dirty" layer with odd particles in it,
at the top of the solution. I'm going to allow the solution to stand for about a day or so.
Check out the ScienceMadness Wiki: http://www.sciencemadness.org/smwiki/index.php/Main_Page
"All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident."
—Arthur Schopenhauer
"¡Vivá Cristo Rey!"
—Saint José Sánchez del Río
|
|
Velzee
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 381
Registered: 19-8-2015
Location: New York
Member Is Offline
Mood: Taking it easy
|
|
The solution looks the same after about a day.
Check out the ScienceMadness Wiki: http://www.sciencemadness.org/smwiki/index.php/Main_Page
"All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident."
—Arthur Schopenhauer
"¡Vivá Cristo Rey!"
—Saint José Sánchez del Río
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4547
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
If I were you, I would try to find a brand of epsom salts that doesn't contain any fragrances. The kind that I buy is just USP grade magnesium
sulfate, with nothing else in it. Much less of a hassle to work with.
|
|
DJF90
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2266
Registered: 15-12-2007
Location: At the bench
Member Is Offline
Mood: No Mood
|
|
Draconic acid was probably referring to trituration of the MgSO4 solids with isopropanol.
|
|
Amos
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1406
Registered: 25-3-2014
Location: Yes
Member Is Offline
Mood: No
|
|
I'd just dissolve it in boiling water, filter(if you see any particulates) and then slowly cool the solution, first at room temperature and then in a
freezer to crystallize it. Your crystals should be pretty much pure magnesium sulfate. Then take your leftover solution, heat it to boiling, add more
magnesium sulfate, repeat.
[Edited on 8-29-2015 by Amos]
|
|
Velzee
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 381
Registered: 19-8-2015
Location: New York
Member Is Offline
Mood: Taking it easy
|
|
Quote: Originally posted by DraconicAcid ![](images/xpblue/lastpost.gif) | That's too cloudy to be a solution. Let it sit for an hour or so, see if anything floats or settles out.
I'd actually try stirring it with isopropanol. It shouldn't dissolve much MgSO4, but will dissolve the oils. |
I don't think the oils dissolved. Perhaps something else could solve my problem?
Check out the ScienceMadness Wiki: http://www.sciencemadness.org/smwiki/index.php/Main_Page
"All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident."
—Arthur Schopenhauer
"¡Vivá Cristo Rey!"
—Saint José Sánchez del Río
|
|
zed
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2281
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Me, I'd just roll down to the local "Dollar Tree", and buy some unscented product.
Cheap and simple.
|
|
Ozone
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1269
Registered: 28-7-2005
Location: Good Olde USA
Member Is Offline
Mood: Integrated
|
|
I think what was meant was to stir with the alcohol, and filter the liquor off. Repeat until the solids are free of fragrance.
A soxhlet would work well, here.
O3
[Edited on 28-10-2015 by Ozone]
-Anyone who never made a mistake never tried anything new.
--Albert Einstein
|
|