Pages:
1
..
11
12
13 |
Brom
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 94
Registered: 19-7-2015
Member Is Offline
Mood: No Mood
|
|
Diggafromdover could you point me in the right direction where I could find a 500 ml heating mantle stirrer for anywhere close to the price you paid?
|
|
Dan Vizine
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 628
Registered: 4-4-2014
Location: Tonawanda, New York
Member Is Offline
Mood: High Resistance
|
|
I also use the permanganate, NaBr & Sulfuric acid route. I maintain the reaction vessel considerable above the boiling point of Br2 by controlling
the rate of acid addition to a soln. of KBr and KMnO4 in hot water. No external heat is needed. The Br2 and some water seems to come over. I wash the
Br2 with H2O and dry over anhydrous NaBr. Distillation gives quite a nice product. I think I made ~900 g of distilled product in two runs in a 2 L RB.
The cost was about $50.
![30 g #35.jpg - 557kB](https://www.sciencemadness.org/whisper/files.php?pid=415441&aid=42511)
![Bromine 0.9 Kg.jpg - 827kB](https://www.sciencemadness.org/whisper/files.php?pid=415441&aid=42513)
[Edited on 10-8-2015 by Dan Vizine]
"All Your Children Are Poor Unfortunate Victims of Lies You Believe, a Plague Upon Your Ignorance that Keeps the Youth from the Truth They
Deserve"...F. Zappa
|
|
Dan Vizine
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 628
Registered: 4-4-2014
Location: Tonawanda, New York
Member Is Offline
Mood: High Resistance
|
|
Quote: Originally posted by Brom ![](images/xpblue/lastpost.gif) | Diggafromdover could you point me in the right direction where I could find a 500 ml heating mantle stirrer for anywhere close to the price you paid?
|
Where else? e-Bay. Just watch patiently for a few weeks. The prices are usually not a giveaway, but if you're diligent in checking, great deals can be
found. I got a practically new 2 L and 3 L mantle together for About $80.
"All Your Children Are Poor Unfortunate Victims of Lies You Believe, a Plague Upon Your Ignorance that Keeps the Youth from the Truth They
Deserve"...F. Zappa
|
|
Brom
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 94
Registered: 19-7-2015
Member Is Offline
Mood: No Mood
|
|
Appreciated. I will look into it.
|
|
Dan Vizine
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 628
Registered: 4-4-2014
Location: Tonawanda, New York
Member Is Offline
Mood: High Resistance
|
|
Don't forget that they don't plug into the wall outlet. A device, like a variac, is needed to control input power.
"All Your Children Are Poor Unfortunate Victims of Lies You Believe, a Plague Upon Your Ignorance that Keeps the Youth from the Truth They
Deserve"...F. Zappa
|
|
Brom
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 94
Registered: 19-7-2015
Member Is Offline
Mood: No Mood
|
|
Thanks a lot for the advice. I wasn't aware of that. Could that be why the ones I was referring to before cost so much? Because they already have that
built in and are ready to plug in?
|
|
Dan Vizine
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 628
Registered: 4-4-2014
Location: Tonawanda, New York
Member Is Offline
Mood: High Resistance
|
|
Yes, there are hard-shelled units that are "plug'n'play" so to speak, they have control knobs. I'm not very familiar with these. Most that I've
encountered were soft-shelled or aluminum-shelled and their maximum power requirements were clearly noted. An iron-constantan thermocouple is often
built-in, and more frequently, ignored.
A variac is rarely very cheap.
"All Your Children Are Poor Unfortunate Victims of Lies You Believe, a Plague Upon Your Ignorance that Keeps the Youth from the Truth They
Deserve"...F. Zappa
|
|
Fleaker
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
I think the best way I ever made bromine was sodium bromide, sodium bromate, and sulfuric acid. Collect the distillate, separate the water, dry it
with c. sulfuric and it's good to go!
Neither flask nor beaker.
"Kid, you don't even know just what you don't know. "
--The Dark Lord Sauron
|
|
j_sum1
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 6256
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
My next attempt will be passing Cl2 through a NaBr solution. I know there are issues with Cl2 but it is actually the most economic use of the
reagents and equipment I have available.
I wish however that I had a good cheap OTC source of bromide salts around here. The only OTC source is Bromochlorodimethylhydantoin for spas, and
even that is hard to come by. The presence of chlorine makes for a really good pool chemical, but pretty much useless as a bromine source.
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4547
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Quote: Originally posted by Fleaker ![](images/xpblue/lastpost.gif) | I think the best way I ever made bromine was sodium bromide, sodium bromate, and sulfuric acid. Collect the distillate, separate the water, dry it
with c. sulfuric and it's good to go! | I'm planning on trying that once I have a functional bromate cell
going. It looks like the most promising and clean method. I don't know if I ever posted it in this thread, but the first time I tried, over a year ago
now, I used sodium bromide, potassium permanganate, and HCl. It got the job done and got me a somewhat wet element sample that I could be proud of at
the time, but definitely wasn't clean or very efficient.
|
|
diggafromdover
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 84
Registered: 24-2-2015
Location: New Hampshire
Member Is Offline
Mood: Inconherent
|
|
Quote: Originally posted by Brom ![](images/xpblue/lastpost.gif) | Diggafromdover could you point me in the right direction where I could find a 500 ml heating mantle stirrer for anywhere close to the price you paid?
|
Ah, but I did not find a mantle, I found a Fisher Thermix, which is a humungous hotplate with magnetic stirrer. I found it on Ebay from a surplus
seller in Vermont. In other words, I stumbled around on eBay until I tripper over it.
Be patient, and keep checking.
Enjoying second childhood with REAL chemistry set.
|
|
Brom
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 94
Registered: 19-7-2015
Member Is Offline
Mood: No Mood
|
|
Thanks for all the input. I'm going to keep watching eBay. Its past time for me to retire my heat gun back to the garage.
|
|
gdflp
|
Thread Split 18-6-2017 at 07:41 |
Texium
|
Thread Topped 9-6-2022 at 15:22 |
Pages:
1
..
11
12
13 |