AnAspiringChemist
Harmless
Posts: 7
Registered: 23-7-2015
Member Is Offline
Mood: No Mood
|
|
How to make rust?
Is there a quick reaction that can yield high amounts of rust with ordinary household materials without any electrolysis? Which form of iron will
produce high amounts of rust efficiently?
|
|
Bert
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Try taking the finest grade of furniture finishing steel wool you can obtain, wash it twice in a solvent such as alcohol or acetone to remove the
preservative oils applied by the manufacturers, mist it with a concentrated salt water solution and place it in a warm, high humidity environment.
Made mixed Iron oxides/hydroxides very quickly this way for my first thermite mixture experiments, 40 or so years back...
No idea what the actual mixture of oxides/hydroxides produced was. It oxidized Aluminum or Magnesium powders just fine, regardless.
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
Pumukli
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 695
Registered: 2-3-2014
Location: EU
Member Is Online
Mood: No Mood
|
|
When I was a kid I collected my "Fe-powder" (actually not powder but very small bits from sawing steel pipes by a hand SS saw) by a big magnet. I
collected a few tablespoonful.
To my surprise when I submerged this "powder" in a bucket of fairly pure rainwater and then immediately drained it the rust was quickly forming! It
was long ago and I don't want to boost my statements but I remember as if the discoloration (rusting) happened visibly, in a few seconds (maybe
minutes), as the "powder" was drying in the sun!
So all you need is as fine the Fe as you can get, some water and mybe some electrolytes (salt) would help as well, as Bert suggested. Nitrate salts
may be even better.
|
|
NedsHead
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 409
Registered: 9-12-2014
Location: South Australia
Member Is Offline
Mood: No Mood
|
|
Some things just aren't worth the trouble, it's worth exploring the chemistry once or twice but if you're after a usable supply of oxide to play
around with it's not worth the time and Labour. Just go to the hardware store and buy it
|
|
MrHomeScientist
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
eBay also sells iron oxides in many-pound lots. I just bought 10 pounds a few weeks ago, for some thermite demonstrations. It's almost certainly
cheaper than rusting your own iron - iron has to be made from rust in the first place, so surely the starting material is less expensive!
|
|
Bert
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
eBay Iron oxides are a VERY mixed bag-
From personal experience and from testing done on Iron oxide catalyzed whistle mixes, cheap red or black oxides sold on eBay as ceramic glaze
materials or otherwise not closely specified have been everything from powdered Iron ores to steel mill scale to (very occasionally) a reasonably pure
and consistent chemical. I guess amateur pottery makers enjoy the surprising variety of glaze effects that come out of the kiln...
The oxides sold as paint/stain pigments or for cosmetics use are more regular.
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
MrHomeScientist
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
Interesting. I have noticed some variation between suppliers as far as color and consistency, but everything has always worked for thermite (which is
all I ever use it for). Alpha Chemical is my latest supplier and they appear to have some good quality chemicals all around.
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4547
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Quote: Originally posted by MrHomeScientist ![](images/xpblue/lastpost.gif) | Interesting. I have noticed some variation between suppliers as far as color and consistency, but everything has always worked for thermite (which is
all I ever use it for). Alpha Chemical is my latest supplier and they appear to have some good quality chemicals all around. | I bought a pound of iron oxide from AlphaChem also. It works well for thermite, and seems pure enough at least for pyrotechnic
purposes (which seems like what the OP would be intereted in) although some of their stuff is rather hit or miss. The manganese sulfate that I bought
from them was gray and smelled like sulfur dioxide. It was easy to purify though. It appeared to be contaminated with MnO2, leading me to think that
the MnO2 + SO2 reaction was used and just didn't go to completion. The crystals that I got from filtering and recrystallizing it are very pure. Even
though I had to go to all that trouble I think it was worth it since two pounds of the stuff was about $4.00
|
|
MrHomeScientist
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
I guess the problem is most are just resellers, so they buy their products from lots of different sources. I had troubles with another seller, gumby96
(gumby-somenumber, at least), where MnO<sub>2</sub> was cut with sand. Nurdrage made a video on it. Other stuff I bought from him had been
great, but after that incident I avoid him. Hit or miss indeed.
|
|
Pyro
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
buy a boat!
you can buy rust as a pigment in some art stores too
all above information is intellectual property of Pyro. ![:D](./images/smilies/biggrin.gif)
|
|
AnAspiringChemist
Harmless
Posts: 7
Registered: 23-7-2015
Member Is Offline
Mood: No Mood
|
|
i was thinking about using steel wool and putting it into some vinegar and or bleach. Problem is, my steel wool is coated in this blue soapy material.
How can i remove this?
|
|
UC235
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 565
Registered: 28-12-2014
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by AnAspiringChemist ![](images/xpblue/lastpost.gif) | i was thinking about using steel wool and putting it into some vinegar and or bleach. Problem is, my steel wool is coated in this blue soapy material.
How can i remove this? |
Go to the hardware store and buy steel wool instead of brillo pads with soap from the supermarket. It's not worth trying to clean them off.
|
|
Pumukli
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 695
Registered: 2-3-2014
Location: EU
Member Is Online
Mood: No Mood
|
|
If you already bought them: make a campfire (outside) and toss them in! :-) Soap should not resist this treatment, iron should. It might get some rust
as well. :-)
|
|
kecskesajt
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 299
Registered: 7-12-2014
Location: Hungary
Member Is Offline
Mood: No Mood
|
|
But the steel wool will burn.
Pumukli: Are you Hungarian?
|
|
AnAspiringChemist
Harmless
Posts: 7
Registered: 23-7-2015
Member Is Offline
Mood: No Mood
|
|
i want to use the steel wool i have. how would i remove this blue soapy material? vinegar?
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Just wash in water a lot.
Easier: just toss them in a bucket of water with bits of old iron, nails etc and wait (maybe stir every day).
Eventually you will have a layer of iron oxide to harvest from the bottom of your bucket.
If you want a lot, add more buckets.
|
|
AnAspiringChemist
Harmless
Posts: 7
Registered: 23-7-2015
Member Is Offline
Mood: No Mood
|
|
if i was to use bleach and vinegar with steel wool, how much rust do you suppose i would be able to get in grams after filtering?
|
|
AnAspiringChemist
Harmless
Posts: 7
Registered: 23-7-2015
Member Is Offline
Mood: No Mood
|
|
you twits didnt reply!!?!?!
|
|
Pumukli
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 695
Registered: 2-3-2014
Location: EU
Member Is Online
Mood: No Mood
|
|
Twits?
Haven't you read the rules?
According to rule number mmm, sumting, clairvoyance is not expected from anyone on this forum.
So before we could give any meaningful answer we may would like to know how much Fe that "steel wool" blob actually contains!
Doh! :-)
|
|
Ozone
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1269
Registered: 28-7-2005
Location: Good Olde USA
Member Is Offline
Mood: Integrated
|
|
If you want rust very quickly, add 9% hydrogen peroxide [what I tested; diluted from a (titrated) 30% solution to mimic the material available for
hair bleaching] to your filings/wool/whatever and a tiny (catalytic) pinch of rust you may have on hand (this works best if your iron/steel has a
small bit of rust to begin with). The reaction should be surprisingly exothermic (it may boil depending on peroxide strength), and yield nice rust in
seconds.
O3
-Anyone who never made a mistake never tried anything new.
--Albert Einstein
|
|
Camroc37
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 101
Registered: 4-8-2015
Location: USA
Member Is Offline
Mood: Must...Nitrate...EVERYTHING!
|
|
Rust
You can use bleach to speed up the rusting, then filter. A quicker way is mixing vinegar and bleach, as the chlorine can help the rusting. This does
make a small amount of chlorine gas, so do this outside or in a fumehood.
|
|