rijec
Harmless
Posts: 5
Registered: 20-5-2015
Member Is Offline
Mood: No Mood
|
|
Stir bar
I recently bought a hotplate/stir plate but it came without a stir bar
now my question is what is the best size for stirring 2L volume.
Thanks.
|
|
|
byko3y
National Hazard
Posts: 721
Registered: 16-3-2015
Member Is Offline
Mood: dooM
|
|
2L is a large volume. And you did not told us what is a shape of your vessel. And what is the maximum size of stir bar that can be used with your stir
plate? Because for a 2L you will probably need the largest stirbar available.
Mine supports up to 5-6 cm long - this is something you need, because 2 cm is barely enough for 1 L.
|
|
|
BromicAcid
International Hazard
Posts: 3237
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
The stir bar should conform to the bottom of your flask, you do not want a pencil shaped stir bar since that may will ride on the edges. You need a
rounded stir bar. Likely you have 24/40 joints or the like. You might think that anything less than 24 mm will fit but the bottom diameter of the
joint is only about 20 mm. So you need a stir bar with a diameter <20 mm to fit. I reccomend just buying a few and pick the one that works best
for your flask. Something egg shaped should work fine. You're only going to get in trouble if you get a really long stir bar.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
