Pages:
1
2 |
vulture
Forum Gatekeeper
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
Ammoniumchlorate
I found a few journals on scirus yesterday which describe the use of ammoniumchlorate as cheap ClO2 source in the production of chlorites. One journal
even had the synthesis for ammoniumchlorate. Sadly, I can't find them anymore today (can't remember search string I used).
Has anyone reliable information about ammoniumchlorate?
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
Polverone
Now celebrating 21 years of madness
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3186
Registered: 19-5-2002
Location: The Sunny Pacific Northwest
Member Is Offline
Mood: Waiting for spring
|
|
I found a few articles
And read a couple of them. One was on spontaneous decomposition of NH4ClO3 and the other on thermal decomposition. The only synthesis I found was
metathesis reaction of barium chlorate and ammonium sulfate; I don't know if this is helpful or not.
According to the spontaneous-decomposition article, NH4ClO3 is stable in cool aqueous solution but undergoes self-accelerating decomposition in the
solid state (unless kept at -5 C or colder, according to the thermal decomposition article), which is why it's so unwelcome in pyrotechnics.
|
|
vulture
Forum Gatekeeper
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
I found something in the college library
4 methods of preparation:
2KClO3 + (NH4)2SO4 -> 2NH4ClO3 + K2SO4
HClO3 + NH3 -> NH4ClO3
2HClO3 + (NH4)2CO3.H2O -> 2NH4ClO3 + CO2 + 2H2O
Ba(ClO3)2.H2O + (NH4)2SO4 -> 2NH4ClO3 + BaSO4 + H2O
Ammoniumchlorate is then isolated by drying in a dessicator with H2SO4.
Ammoniumchlorate consist of small needle-like crystals. Instabile, do not store, might explode without apparent stimilus, certain explosion above
100C.
When spread out in a thin layer, ammoniumchlorate is safe to manipulation. Very water soluble.
The reactions with HClO3 use 40% HClO3 produced according to the following procedure:
322g of bariumchlorate are dissolved in 500ml boiling water. While stirring, a mixture of 98g conc sulfuric acid (53,3ml D 1,84) and 53,3ml H2O is
added. A slight excess of bariumchlorate is favourable over an excess of sulfuric acid. The bariumsulfate ppt is allowed to sit for one hour. Two
third of the liquid is decanted and the rest is filtered through a Buchner funnel. The filtrate is joined with the decanted solution and yields approx
660ml of approx 22% chloric acid (D 1,11).
When this is dried in a vac exsiccator over conc sulfuric acid, a 40% solution of chloric acid can be achieved, which complies with the formal
composition of HClO3.7H2O D 1,28
All taken from anorganische chemie by F. Huber and M. Schmeisser
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
KABOOOM(pyrojustforfun)
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 254
Registered: 12-10-2002
Location: Iran (pseudoislamic dictatorship of)
Member Is Offline
Mood: exuviating!
|
|
<a href="http://swi.1av10.nu/dist/pyrok2k.zip">from Swedish Infomania:</a><br>
Ammoniumklorat (NH4ClO3)
Som kuriosa nنmns hنr ocksه ammoniumklorat, ett نmne som orsakat stora skador
dه det av misstag bildats nنr t.ex. kaliumklorat blandats med ett ammoniumsalt.
Pه grund av sin hِga kنnslighet och instabilitet نr det helt uteslutet som
sprنngنmne. Det exploderar om en 2 kg tung vikt faller 15-20 cm, och upphettat
till 40 °C sه exploderade det efter 11 timmar. Inneslutet in en glasflaska under
48 timmar sِnderfaller det explosivt och sprنcker flaskan. Ammoniumklorat
sِnderfaller sakta i rumstemperatur under bildandet av klorluktande gas. Det
exploderar enligt reaktionsformeln:
2NH4ClO3 ---> N2 + 3H2O + 2HCl + 3/2O2
Detonationshastigheten vid densiteten 0,9 g/cm³ fanns vara 3300 m/s och
blyblocksexpansionen 250cm³. Det tar eld frهn en stubin, och inneslutet sه
exploderar det. Skall man som ett experiment tillverka ammoniumklorat gِr man
som fِljer: 3,5 g kaliumklorat lِses 10 ml varmt destillerat vatten. Tillsنtt
till lِsningen 3,6 g ammoniumperklorat och rِr om. Kristaller av kaliumperklorat
bildas. Lهt lِsningen svalna och filtrera bort kristallerna. Koncentrera
lِsningen till 3 ml pه ett vattenbad. Kyl lِsningen och filtrera ut bildad
ammoniumklorat och torka det i rumstemperatur. Utbytet blir 1.9 g, dvs 55-63%
utbyte.
urea chlorate sounds very intersting but probably quite unstable (more than ammonium chlorate)
|
|
chemoleo
Biochemicus Energeticus
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
NH4ClO4 from NaClO4 ??
I always wondered this- how can I make NH4ClO4 from sodium perchlorate, if this the only starting material I got? I mean, NH4ClO4 without any other
salts in it of course (like, as vulture said 2KClO3 + (NH4)2SO4 -> 2NH4ClO3 + K2SO4, but how do I get rid of the potassium sulphate?) . I wouldnt
want to risk distilling perchloric acid (generated by adding H2So4 to NaClO4), which I then would add to ammoniumbicarbonate etc. The point is, it
seems almost impossible to make NH4ClO4 without acess to the free acid. I checked, NH4ClO4 has unfortunately a rel. high solubility, so preciptiation
is (unless under highly controlled conditions) no option. Any ideas??
|
|
vulture
Forum Gatekeeper
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
2NaClO4 + H2SO4 ---> 2HClO4 + Na2SO4
2HClO4 + 2NH3 ---> 2NH4ClO4
Use max 70% H2SO4!!!
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
chemoleo
Biochemicus Energeticus
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
sure, but the point is, how do I get rid of the Na2SO4? that's what I really meant. I can't seem to find a way to make it pure, wthout any
other salts. (unless distillation, but thats a bit risky..)
|
|
vulture
Forum Gatekeeper
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
Freezing it out? IIRC, 70% perchloric acid freezes below -20C. At that temperature the solubility of Na2SO4 in 70% acid should be very low.
Don't use a paper filter! Glasswool is recommended.
Another possibility would be the following:
BaCO3 + 2HClO4 ---> Ba(ClO4)2 + H2O + CO2
(Bariumperchlorate is very soluble)
Ba(ClO4)2 + (NH4)2SO4 ---> BaSO4 + 2NH4ClO4
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
rikkitikkitavi
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 192
Registered: 17-6-2002
Member Is Offline
Mood: No Mood
|
|
what about NaClO4 + NH4NO3 ?
NH4ClO4 is the least soluble salt at 0 c
at 0 c per 100 gr H2O solubility
NaClO4 167 gr
NaNO3 73 gr
NH4ClO4 12 gr
NH4NO3 118 gr
shure, you wont get 100 % yeild since some NH4ClO4 will remain in solution, but then it is just to add more NaClO4 or NH4NO3 to reduce the amount.
No tinkering about with perchloric acid ![:)](./images/smilies/smile.gif)
That is nasty stuff.
/rickard
/rickard
|
|
chemoleo
Biochemicus Energeticus
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
cool. the precipitation method at 0deg C may be a good one. will try soon. by the way, where did u get the solubility data from? online? if so, whats
the URL?
thx
|
|
rikkitikkitavi
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 192
Registered: 17-6-2002
Member Is Offline
Mood: No Mood
|
|
I got the data from Langes handbook och chemistry. But from the ftp (when it is up agian) you can download Perrys Handbook of chemical engineering.
Chapter 2 in that book contains lots of physical data about various compounds, including solubilites for lots of organic and inorganic compounds.
/r
|
|
the timeless
Harmless
Posts: 14
Registered: 3-9-2003
Location: Mirrorland
Member Is Offline
Mood: No Mood
|
|
to chemoleo
In the name of Jesus! Don´t distill explosive materials! It is suicidal, even if you filled the column with nitrogen!
|
|
chemoleo
Biochemicus Energeticus
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
lol... who said I would? I am not totally suicidal, insane or retarded No, thats
not open to discussion
|
|
vulture
Forum Gatekeeper
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
I hate it when people read the first lines of a thread and then go into a jerky daisy chain of negative thoughts: perchloric acid ---> reaction
---> BOOM!
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
Marvin
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 995
Registered: 13-10-2002
Member Is Offline
Mood: No Mood
|
|
There is a complete synthesis of ammonium chlorate and barium chlorate (via ammonium) in Inorganic Synthesis from potassium chlorate and either
ammonium sulphate or chloride (I forget). This method is the better part of a century old though and this would be regarded as highly unsafe in
modern terms.
A similar method should be possible for perchlorate, but this is much less soluable, so this needs to be modified.
2NaClO4 + H2SO4 ---> 2HClO4 + Na2SO4
This sounds badly thought out. Perchloric acid is a strong acid, hydrogen sulphate isnt and is probably much more soluable. The general idea of
making an acid by precipitating a salt seems a little unsubtle.
From a neutral solution one way to cause sulphates to crash out is by adding ethanol. Though it doesnt make it any easier to control which sulphate
is the one that precipitates in a mixture and yes, this is the complete reverse of 'salting out'.
rickard, ammonium perchlorate is probably the least soluable, but taking the lowest value of a list isnt reliable for predicting which one will
precipitate first.
|
|
vulture
Forum Gatekeeper
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
Industrial method for NH4ClO4 is the following:
NaClO4 + HCl + NH3
Don't ask me how this actually works, but it is being done this way.
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
sylla
Alchimiste Belge Notoire
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 110
Registered: 2-8-2003
Location: Belgium
Member Is Offline
Mood: No Mood
|
|
I've done it and it's really easy. HCl + NH3 gives NH4Cl but at a lab scale we can use already done NH4Cl.
So, first prepare a saturated solution of aquous NH4Cl (about 50g/l at 20°C if I'm not wrong) and then add the correct amount of NaClO4 (which
is very soluble, 2Kg/l).
a part of the NH4ClO4 precipitate quickly due to its low sollubility (20g/l). You can be sure it is not NaCl because of its higher solubility.
Then just filter the ammonium perchlorate. It is a good idea to rince it with cold ethanol to remove any other salts.
|
|
chemoleo
Biochemicus Energeticus
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
Doesnt this separation base on the common ion effect? I.e. surplus NH4Cl aids the precipitation of the nascent NH4ClO4.
Never Stop to Begin, and Never Begin to Stop...
Tolerance is good. But not with the intolerant! (Wilhelm Busch)
|
|
sylla
Alchimiste Belge Notoire
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 110
Registered: 2-8-2003
Location: Belgium
Member Is Offline
Mood: No Mood
|
|
even if NaClO4 is more difficult to get, I would say it is a better idea to use an excess of perchlorate ion knowing it's very high solubility.
Actually, we are pretty limited by the solubility of ammonium chloride. One should try with more soluble salt such as ammonium nitrate.
Unfortunately it can't be done with ammonia because of beeing essentialy NH3 and NOT NH4+ (I mean, at 20°C of course...)
|
|
hodges
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 525
Registered: 17-12-2003
Location: Midwest
Member Is Offline
|
|
I am in the process of making a small amount of ammonium chlorate as an experiment.
Everything is homemade, so I'm not positive about the quality of the chemicals. I still have a few grams KClO3 I made by electrolysis over a
year ago. I'm pretty sure that this is fairly good quality - it burns in a flash when mixed with sugar and that mixture also ignites in contact
with concentrated H2SO4. I made ammonium sulfate by adding sulfuric acid drain cleaner to clear household ammonia. I used an excess of ammonium
hydroxide, titrating until phenylthalian indicator was a very faint pink. The idea was to avoid forming the bisulfate. According to the CRC
handbook, ammonium sulfate does not decompose until 250C so I figured I was safe drying in an oven at 200C. However, later I read that ammonium
sulfate decomposes somewhat to the bisulfate in boiling water. So I'm not sure if I ended up with the sulfate or the bisulfate.
The replacement reaction I used was
(NH4)2SO4 + 2KClO3 ---> 2NH4ClO3 + K2SO4
132 2 * 123 2 * 101 176
I dissolved 0.3g of (NH4)2SO4 in the minimum amount of water required to dissolve at room temperature. Likewise I dissolved 0.6g of KClO3. I mixed
the solutions together. I added about an equal volume of denatured ethyl alcohol. The K2SO4 gradually separated out, and I moved the remaining
liquid to a small plastic cup using a pipette.
The liquid is presently drying. A drop of it dried on the side of the cup, so I scraped off the white crystal and ignited it with a barbecue lighter.
It burned with a slight fizz (may not have been completely dry) and produced a small puff of white smoke.
|
|
neutrino
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1583
Registered: 20-8-2004
Location: USA
Member Is Offline
Mood: oscillating
|
|
Quote: | Originally posted by hodges
I used an excess of ammonium hydroxide, titrating until phenylthalian indicator was a very faint pink. The idea was to avoid forming the bisulfate.
|
The problem here is that ammonium bisulfate is acidic.
|
|
chloric1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1102
Registered: 8-10-2003
Location: GroupVII of the periodic table
Member Is Offline
Mood: Stoichiometrically Balanced
|
|
ammonium chlorate
Well I happy to hear that you are having some success. I believe this was a method listed in "Handbook of Preparative Inorganic Synthesis"
actually this was a step in the barium chlorate proceedure if I understand correctly. Somewhere in my infinite stack of photocopies and articles I
have a proceedure that basically states that you can take a chlorate and add 70% nitric acid and evaporate then repeat a couple of times and you have
a 30% conversion to perchlorate.
Fellow molecular manipulator
|
|
hodges
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 525
Registered: 17-12-2003
Location: Midwest
Member Is Offline
|
|
I ended up with 0.6g of completely transparent crystals. I understood they were supposed to be "small needles", and I imagined them looking
like pine needles. Instead, they are small and thin but fat prisms with a point on the end. They are about 1/4 inch long and about as wide as they
are fat. Here is the shape they look like:
=>
I tried to take a picture but they do not show up very well.
I placed a few of these on the end of a popsicle stick and lit with a barbecue lighter. They did not explode, but smouldered for several seconds,
occasionally flaring up and releasing a relatively large puff of white smoke. The smoke had a very foul smell - not that of chlorine but closer to
chloramines.
I don't presently detect any odor from the crystals, and no visible vapor is being given off. I measured their temperature with an infrared
thermometer and they are at the same temperature as their surroundings. Will leave them in a safe place near the sink and see if they start to heat
up or otherwise change.
|
|
hodges
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 525
Registered: 17-12-2003
Location: Midwest
Member Is Offline
|
|
I'm not real convinced of the quality of my ammonium chlorate. For one thing, the "needles" are not like I had imagined them based on
their description. And I didn't see any explosive qualities. I did detect chlorine oxides by smell when I burned some, though.
I made the KClO3 myself. Its possible that it contains KClO4. I know there is some KClO3 since a mixture with sugar ignites with concentrated
sulfuric acid.
The ammonium sulfate is another unknown. One source lists its decomposition temperature as 250C, but another says it turns to the bisulfate when a
water solution of it is boiled. Since I dried it in the oven that may be what happened. Would there be an easy way to test for ammonium bisulfate
vs. ammonium sulfate? One way I can think of, which would not be particulaly quick, would be to weigh some , add concentrated NH4OH and evaporate,
then weigh again. The weight should increase slightly if it changed from bisulfate to sulfate.
|
|
kryss
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 77
Registered: 11-7-2003
Location: N Ireland
Member Is Offline
Mood: No Mood
|
|
NH4SO4 Decomp
We dry amm sulphate in an oven at 105 degs C , its a primary standard it doesnt decompose until much higher - it melts and forms bisulphate
|
|
Pages:
1
2 |