Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Thermal Decarboxylation - Alkyl Phenyl Ketones
Organikum
resurrected
*****




Posts: 2337
Registered: 12-10-2002
Location: Europe
Member Is Offline

Mood: frustrated

[*] posted on 22-2-2005 at 23:16
Thermal Decarboxylation - Alkyl Phenyl Ketones


The attached articles refer to the production of ketones by thermal decarboxylation. The second one in special refers to the production of acetophenone and propiophenone from iron acetetate or propionate and benzoate.
The method for sure applies also to the production of phenyl-2-propanone from PAA and iron acetate.
The iron salts can also be prepared from iron oxides - black iron oxide as used as cement-pigment comes to mind here and acetic acid of less than 65% strength.

The practical method is similar to the making of benzene from sodium benzoate and NaOH as described by me in the "benzene" thread.

Articels courtesy lugh.

Attachment: davis_ferric.djvu (92kB)
This file has been downloaded 1701 times





Irgendwas is ja immer
View user's profile View All Posts By User
frogfot
Hazard to Others
***




Posts: 212
Registered: 30-11-2002
Location: Sweden
Member Is Offline

Mood: happy

[*] posted on 23-2-2005 at 09:51


Thanks for this good info!! I didn't know one could use usual glass equipement for this.. gonna try this out once I get some heavy carboxylic acids.
Maby it's worth to try this with fatty acids.. They don't mentions any yelds with really long acids, like say stearic acid..
View user's profile Visit user's homepage View All Posts By User
FriendlyFinger
Hazard to Self
**




Posts: 64
Registered: 14-3-2005
Member Is Offline

Mood: No Mood

[*] posted on 18-2-2006 at 00:54


I can't download this file, It doesn't seem to be there. Does anyone have another link?

Thanks,
FF
View user's profile View All Posts By User
solo
International Hazard
*****




Posts: 3975
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline

Mood: ....getting old and drowning in a sea of knowledge

[*] posted on 18-2-2006 at 04:49


I reloaded the file again........solo

Attachment: davis_ferric.djvu (92kB)
This file has been downloaded 1238 times





It's better to die on your feet, than live on your knees....Emiliano Zapata.
View user's profile View All Posts By User
leu
Hazard to Others
***




Posts: 368
Registered: 13-10-2005
Member Is Offline

Mood: No Mood

[*] posted on 18-2-2006 at 06:10


You have to right click, select save as and rename the file extension to djvu to download and open it, or you can download the same two articles in the Wet Dreams thread for literature requests from this and other forums :D



Chemistry is our Covalent Bond
View user's profile View All Posts By User
FriendlyFinger
Hazard to Self
**




Posts: 64
Registered: 14-3-2005
Member Is Offline

Mood: No Mood

[*] posted on 22-2-2006 at 00:22


Sorry, can't find them at wetdreams and definately can't rename after right clicking. The computer automatically tries to download then says it can't find it. Fuck I wish I had a brick right now!
View user's profile View All Posts By User
FriendlyFinger
Hazard to Self
**




Posts: 64
Registered: 14-3-2005
Member Is Offline

Mood: No Mood

[*] posted on 29-4-2006 at 19:24


Could someone please post another link or at least the name of these two articles so I can look for them somewhere else because I simply can't download it! I have tried for hours and hours. I really have.

See where it says " this file has been downloaded 81 times" well that's me, trying 80 times!

please, thanks.

[Edited on 30-4-2006 by FriendlyFinger]
View user's profile View All Posts By User
solo
International Hazard
*****




Posts: 3975
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline

Mood: ....getting old and drowning in a sea of knowledge

[*] posted on 29-4-2006 at 21:47


Here you go.....................solo

http://rapidshare.de/files/19241162/thermal_decarboxylation_...




It's better to die on your feet, than live on your knees....Emiliano Zapata.
View user's profile View All Posts By User
Nicodem
Super Moderator
*******




Posts: 4230
Registered: 28-12-2004
Member Is Offline

Mood: No Mood

[*] posted on 30-4-2006 at 11:40


Quote:
Originally posted by FriendlyFinger
See where it says " this file has been downloaded 81 times" well that's me, trying 80 times!


The next time this hapens to you either use normal HTTP (not HTTPS) access or simply copy the URL link to another window and delete the S from HTTPS. That should do.
It is due to a bug in Internet explorer. :(




…there is a human touch of the cultist “believer” in every theorist that he must struggle against as being unworthy of the scientist. Some of the greatest men of science have publicly repudiated a theory which earlier they hotly defended. In this lies their scientific temper, not in the scientific defense of the theory. - Weston La Barre (Ghost Dance, 1972)

Read the The ScienceMadness Guidelines!
View user's profile View All Posts By User
FriendlyFinger
Hazard to Self
**




Posts: 64
Registered: 14-3-2005
Member Is Offline

Mood: No Mood

[*] posted on 2-5-2006 at 20:52


Well blow me down. Solo, please mail me your shoes, I keep them under my bed!

Thank you very much
View user's profile View All Posts By User
FriendlyFinger
Hazard to Self
**




Posts: 64
Registered: 14-3-2005
Member Is Offline

Mood: No Mood

[*] posted on 16-5-2006 at 02:33


What's the chance of this reaction working with ordinary non reduced iron powder?
View user's profile View All Posts By User
bio2
Hazard to Others
***




Posts: 447
Registered: 15-1-2005
Member Is Offline

Mood: No Mood

[*] posted on 16-5-2006 at 03:21


Iron can be reduced in a few minutes by
being the Cathode in an electrolytic cell.
Turnings in a net or something.

Precipitated Fe should work and scrap iron
is used in industry and works somewhat
less vigorously.

Main thing is relatively oxide free and clean!
View user's profile View All Posts By User
FriendlyFinger
Hazard to Self
**




Posts: 64
Registered: 14-3-2005
Member Is Offline

Mood: No Mood

[*] posted on 26-5-2006 at 02:26


Oh! How do you do that? I know nothing about electrolytic cells. How much current? what medium do you use? Is there a book you can mention that I can read?

Also can iron propionate be made using iron oxide or is Organikum refering to iron acetate?
View user's profile View All Posts By User
solo
International Hazard
*****




Posts: 3975
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline

Mood: ....getting old and drowning in a sea of knowledge

[*] posted on 26-5-2006 at 06:49


Principles of Electrochemistry
Jiri Koryta Jiri Dvorak Ladislav Kavan
Publisher: John Wiley & Sons Inc
Publication Date: 1993-05
Number Of Pages: 502

http://www.uploading.com/?get=BJPZU620

Review
Presents electron transfer and double-layer theories in an understandable manner while keeping mathematics to a minimum. Revised and expanded, this edition features a number of new sections which deal with electrochemical materials science, photoelectrochemistry, stochastic processes, novel aspects of ion transfer across biological membranes, biosensors and more.


.........source,

http://anuvinu.blogspot.com/




It's better to die on your feet, than live on your knees....Emiliano Zapata.
View user's profile View All Posts By User
Organikum
resurrected
*****




Posts: 2337
Registered: 12-10-2002
Location: Europe
Member Is Offline

Mood: frustrated

[*] posted on 15-2-2007 at 19:47


Quote:
Originally posted by bio2
Iron can be reduced in a few minutes by
being the Cathode in an electrolytic cell.
Turnings in a net or something.

Precipitated Fe should work and scrap iron
is used in industry and works somewhat
less vigorously.

Main thing is relatively oxide free and clean!


IIRC then the problem of using oxides was solved by somebody at the HIVE, he used lead though, not iron. But the basic principle stays the same I suppose - the formation of the iron salt in the needed oxidation state depends on the concentration of the acid as mentioned in the first post of mine. Using foir example acetic acid of more then 65% strength in the salt formation will give lousy yields (for lead salts and I think the same for iron salts).
Davis mentiones that magnetic black iron oxide as used as cement pigment gives poor yields (at least in one example - 4%). But when the preparation is tweaked then....

[Edited on 16-2-2007 by Organikum]




Irgendwas is ja immer
View user's profile View All Posts By User
manimal
Hazard to Others
***




Posts: 180
Registered: 15-1-2008
Member Is Offline

Mood: ain't even mad

[*] posted on 23-11-2009 at 09:45


See here: instead of risking oxidative degradation by recovering iron acetate from solution, it can be made in situ from ferrous sulfate and sodium carboxylate; this would form ferrous carboxylate and sodium sulfate. The NaSO4 would stick around, but may act as a bulking agent and not interfere with the decarboxylation.

[Edited on 23-11-2009 by manimal]
View user's profile View All Posts By User
bbartlog
International Hazard
*****




Posts: 1139
Registered: 27-8-2009
Location: Unmoored in time
Member Is Offline

Mood: No Mood

[*] posted on 23-11-2009 at 10:57


And then you have ferrous carboxylate (I would say carbonate), which (I can only assume) you will further treat with acetic acid (or propionic acid)? But why not just use sodium acetate (and benzoate or w/e) in that case and do things in one step? Also, while the carbonate will react so long as benzoic acid and/or propionic acid are used, some other carboxylic acids are weaker and would not be able to displace the CO2.

As for the general procedure, it looks like a variety of metals other than iron would work. The paper mentions the original work done by Friedel using calcium, and I see someone else above mentions using lead. From what I recall about pyrolysis of calcium salts of carboxylic acids (to produce ketones), the temperatures needed are higher than those used for the iron salts in the paper. I don't know whether this is the only reason they used iron.

Too bad about the ortho- effects. Can't do anything neat with salicylates this way.


[Edited on 24-11-2009 by bbartlog]
View user's profile View All Posts By User

  Go To Top