palapo
Harmless
Posts: 1
Registered: 25-11-2014
Member Is Offline
Mood: No Mood
|
|
vacuum distillation pump
Help for a newb!
Ive done some oil distillation under a vacuum pump. I normally used the faucet at full with cold water for the condenser. As a newb i though a vacuum
pump was better then an simple aspirator, so i bought a SCHUCO aspirator pump. It says its an oil-less pump and it hast an antibacterial host to
prevent contamination with a canister, (that i did not use).Now this oil burn over 200*C, when i set up for vacuum distillation i did not set a trap,
manometer and neither a filter. I know this is a medical vacuum and i though it would work so i simply conected the vacuum host to the adapter. This
oil burned under 100*C, however i think it worked, i am not even sure it did or done the right way.
Questions
Is this vacuum suitable for vacuum distillation? ( with the kit, gauge, hydrophobic host and canister)
IF YES- Do i still need to set up a trap and/or filter?
Attachment: fMIEDdFE_QekTwDsBkxdXQ91pYQK4z_MnpqYlVcXcXxxlpm1bPA2C2XE31-Yg5zl6Xg2390Rn4pI6yPMKJ2CbRxSpAqp_vxRh5t-P862Yt-okyt0SZRVYVwe (11kB)
This file has been downloaded 595 times
|
|
|
macckone
Dispenser of practical lab wisdom
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
You should probably use a trap.
A medical vacuum pump may not generate
A high vacuum. Many of those only generate
A few psi. Also the diaphram may not
be suitable for exposure to oils.
|
|
|
chemrox
International Hazard
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
Aspirator pumps generally have a water bath. pump, a pair of aspirators
The pic looks like a cheap diaphragm pump
a good aspirator pump will provide between 5 - 10 torr
"When you let the dumbasses vote you end up with populism followed by autocracy and getting back is a bitch." Plato (sort of)
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
