Pages:
1
2 |
12AX7
Post Harlot
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Ozone must mean it's hot enough to break the O2 double bond but not the N2 triple bond...
Maybe you should lead microwaves into a toroidial magnetic field. Then while
you're at it, add some deuterium and tritium. ![;)](./images/smilies/wink.gif)
Tim
|
|
darkflame89
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 255
Registered: 1-3-2004
Location: With probability 1, "somewhere" in this
Member Is Offline
Mood: No Mood
|
|
I've read somewhere that if some nitrogen monoxide is present, it will catalyse the destruction of the ozone.
The equations:
O + N20 ------>2NO
O3 + NO ----> NO2 + O2
NO2 + O ------>NO + O2
where the Os are the oxygen atoms that have broken apart from the molecule.
The net effect is:
O3 + O ----->2O2 and the nitrogen monoxide is regenerated. Perhaps if some nitrogen monoxide are dinitrogen oxide is added, it could help the ozone
break down....But that would mean more energy is just wasted as the microwave creates more ozone...
Maybe if pure nitrogen gas were to be pumped into the bowl instead of using air?
Ignis ubique latet, naturam amplectitur omnem.
|
|
12AX7
Post Harlot
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
As I recall from somewhere, NO + O = NO2 is preferred, hence NO turns brown in air.
Tim
|
|
jpsmith123
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 764
Registered: 24-6-2005
Member Is Offline
Mood: No Mood
|
|
Actually it may be the other way around.
In the patent and the paper I cited, the microwave discharge is confined to a shorted waveguide; thus the electric field would be significantly higer
and consequently the electron energy and temperature would be higher as well, theoretically resulting in more NO.
I would think you would want to flow the air through this hot zone.
Quote: | Originally posted by Samosa
My friend stopped by today and we got to run a few more tests on the microwave. The big conclusion of the day is that reasonable yields will only be
obtained from large reaction vessels--the higher the volume, the better.
|
|
|
ayush
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 727
Registered: 22-7-2005
Location: India
Member Is Offline
Mood: No Mood
|
|
Modern Electrochemistry
Modern Electrochemistry by John Bockris Vol 1 & 2
http://rapidshare.de/files/3096358/electrochemistry_1.djvu.h...
http://rapidshare.de/files/3262784/electrochemistry_2.djvu.h...
|
|
jpsmith123
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 764
Registered: 24-6-2005
Member Is Offline
Mood: No Mood
|
|
Hello Ayush,
I'm not sure how electrochemistry is related to "Microwave-made Nitric Acid", but thanks for the links.
In any case, it gives me an idea: Given the high flame temperature, I wonder if an oxyhydrogen torch would be a good heat source for making nitric
oxide? (I've seen small electrolysis-powered torches for sale somewhere on the internet).
Regards,
Joe
|
|
jpsmith123
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 764
Registered: 24-6-2005
Member Is Offline
Mood: No Mood
|
|
700 Watt Microwave Oven At Local Store For $29.00
A local store is now selling a 700 watt microwave oven for $29.00 USD.
At that ridiculously low price, it seems to me that the microwave oven method may be the best, if a few practical details of implementation can be
worked out.
Unfortunately I don't yet have a place to work, but I hope to eventually get around to try the method described in the attached patent.
Attachment: 6696662.pdf (877kB) This file has been downloaded 1197 times
|
|
Quince
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 773
Registered: 31-1-2005
Location: Vancouver, BC
Member Is Offline
Mood: No Mood
|
|
Naudin is a crackpot. Just look at his lifter page.
\"One of the surest signs of Conrad\'s genius is that women dislike his books.\" --George Orwell
|
|
franklyn
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 30-5-2006
Location: Da Big Apple
Member Is Offline
Mood: No Mood
|
|
http://www.sciencemadness.org/talk/viewthread.php?tid=1518&a...
.
|
|
quantumcorespacealchemyst
Banned Shitposter
Posts: 213
Registered: 17-10-2014
Member Is Offline
Mood: No Mood
|
|
the idea i am getting from this is this. first off this needs some engineering. alright, here, using what jpsmith123 mentions about the arc being
concentrated, the idea will involve
this and an air compressor into a quartz (very thick wall) vessel (all shielding will need to be taken care of, this is not this post's focus). this
vessel is formed with an in and outlet
that enter and exit the microwave, THERE IS NO WATER IN THE MICROWAVE. the gas is catalyzed by rhodium or rhodium/platinum which is either in the
vessel, or in an exit
chamber before bubling into water to turn the NO to NO2 and possibly lower the activations of pathways leading to NO. the ideal way to run it seems
to to me to be in pulses and
or with patterning run from a computer and is run with respect to pressure expansion, and has to take into account that/energy absorption. it will
seemingly take good calculations
and tinkering. the catalyst seems to need to be inside the flask as to become exited, which also seems to add to the reactivity/pressure increase.
this gas when uncompressed
into water will seemingly cool it greatly and absorb well into it. the catalyst needs to be kept from turning to plasma and depleting/contaminating
the end product, although it may
be easily filtered, i am not sure. the electrodes themselves i guess are idealy the catalyst, arcing as jpsmith123 wrote.
[Edited on 17-11-2014 by quantumcorespacealchemyst]
|
|
j_sum1
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 6256
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
The appeal of this synthesis is the cheap availability of the equipment and reagents. If you are doing significant engineering on it, playing with
quartz vessels or catalysing using rhodium then you have missed the point of the exercise in my opinion.
I suspect this thread has been dead for nine years because the yield is too low to be practical.
|
|
hissingnoise
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
Quote: | I suspect this thread has been dead for nine years because the yield is too low to be practical. |
Indeed, even with cheap Norwegian hydroelectric power, the BE process was found uneconomical since the conversion rate was in the region of only 3% .
. .
Quote: | ...the gas is catalyzed by rhodium or rhodium/platinum which is either in the vessel, or in an exit. |
Nitric oxide is oxidised by O2 on contact; NO2 is seen as a heavy brown vapour!
|
|
quantumcorespacealchemyst
Banned Shitposter
Posts: 213
Registered: 17-10-2014
Member Is Offline
Mood: No Mood
|
|
i see, anyways the catalyst may help or at least do something weird. i figure why not revive it with a optimization/efficiency approach, using the be
process and microwave and
compressing the gas? i dont know if there is a better yield being compressed, especially if arcing through the liquid portion, or liquid portion up
into the gaseous part? birkeland
eyde process theads may not want to divert to this non standard approach, though i hope they do. this forum while dead dfoes have the title and will
draw search results for
microwaves and nitric acid. what do you think? i will repost this anyway on birkeland eyde threads. thanks
|
|
hissingnoise
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
Quote: | ...i see, anyways the catalyst may help or at least do something weird. |
A PGM catalyst that may reduce your NO2 to N2 as happens in cat.converters is not what you need?
|
|
quantumcorespacealchemyst
Banned Shitposter
Posts: 213
Registered: 17-10-2014
Member Is Offline
Mood: No Mood
|
|
i see what you mean, i didn't think of that. the weird thing i don't get is that heated platinum wire in the ostwald process turns ammonia to NO2 (or
NO which oxidizes with O2 to NO2). in the plant, i think the second step happens away from the catalyst, but in demonstrations i have seen, the flask
with the hot Pt wire dipped in it, with NH3, turns the gas layer brown with NO2. is it the heated Pt that behaves different? perhaps something to do
with equilibrium? the concentration of ammonia overpowering the NO2 till it reaches an equilibrium of decomposing the NO2 and producing NO and NO2?
one thing besides is if the birkeland eyde and haber process combine (although i don't know about haber-bosh effect actually happening at 300x less
pressure) the N2 would seemingly want to become NH3 and well this is a mess with H2O being electrolyzed and expected to form those pathways instead of
straight back to water. haha. although those people doing cold fusion research may be splitting the water with high voltage and pressure creating
plasmas. going with guessing, there may be something here nonetheless.
did't find the video of a lab experiment i saw, but this seems to be more than adequate to show what i mean. http://www.youtube.com/watch?v=uMFvzohuVew
only, 500kV or more instead.
|
|
quantumcorespacealchemyst
Banned Shitposter
Posts: 213
Registered: 17-10-2014
Member Is Offline
Mood: No Mood
|
|
backup from the video that is linked in the last post
How to reproduce this experiment
The CFR project is a High Temperature Plasma Electrolysis fully based on the Tadahiko Mizuno experiment from the university of Hokkaido in Japan. This
is a very interesting experiment and its implication can be a real breakthrough in the field of New and Clean energy source....
The enhanced CFR is composed of a 2000 mL thermostatic reaction vessel filled with 800 mL of demineralized water and Potassium Carbonate ( K2CO3 ).
The electrolyte solution commonly used is 0.5 molar ( 0.5 M ).
There are three temperature probes ( K probe or PT100 ). Two probes are used for measuring the temperature of the cooling water (Temp In and Temp Out
),
and one probe is used for measuring the temperature of the electrolyte solution. You need also to use a flowmeter to measure the cooling water flow.
The Cathode used is a 4 mm tungsten rod. The tungsten rod can be a pure tungsten rod or a Th-loaded tungsten TIG electrode (WT20) (with thorium oxide
ThO2: 1.70% to 2.20% ) commonly used for plasma welding. The use of a Th-loaded rod increases the life of your cathod. The sputtering effect produced
by the thermionic emission is lower with a Th-loaded rod than with a pure tungsten rod.
The anode used is composed of stainless steel mesh ( a grid ) maintained with stainless steel rods. If you have planned to conduct some chemical
analysis, I recommend you to use a grid made with platinum or nickel . All the wires connections are made with a 1.5 mm2 copper flexible wire gained
with silicon.
To avoid projections of some drops of the electrolyte solution from the CFR during the plasma ignition sequence, I recommend you to put floating balls
on the surface of the liquid (hollow floating balls; pp, 20mm, 2000 PK from Cole Parmer Instrument ).
Use a DC Power Supply which is able to give about 300 V DC at 20 A ( don't use AC voltage ). The voltage is tuned with an autotransformer
Switch on the fume hood,
Set the autotransformer to 0 Volt and switch on the power supply,
The voltmeter (set on DC) is connected at the input of the CFR cell and the DC current clamp is connected on the positive wire,
Turn the knob of the autotransformer so as to get 30V DC on the CFR cell,
Let the electrolysis warm up the cell up to 50°C,
At 50°C drop the voltage to 0 Volt and switch off the main power supply,
Wait 30 sec to exhaust the mixture of hydrogen/oxygen,
Measure the temperature ( TSinp ) of the input of the cooling water,
Measure the temperature ( TSout ) of the output of the cooling water.
Measure the temperature ( Tr_initial ) of the electrolyte then, immediatly, switch on the power supply,
Slowly, turn the autotransformer knob so as to get 200 VDC across the cell. Start the chronometer,
Note the Voltage and Current values at the permanent regime (pink glow discharge),
End the run after ~3 minutes. ( set the voltage to 0 Volt and switch off the power supply ). Stop the chronometer (time).
Measure the temperature ( Tr_final ) of the electrolyte,
Measure the flow of the cooling water (Flow in L/min),
Measure the temperature ( TEinp ) of the input of the cooling water,
Measure the temperature ( TEout ) of the output of the cooling water.
|
|
CuReUS
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
could this be used for vapor phase nitration
http://www.google.com/patents/US4347389
but the organic compound may catch fire
|
|
quantumcorespacealchemyst
Banned Shitposter
Posts: 213
Registered: 17-10-2014
Member Is Offline
Mood: No Mood
|
|
i am wondering about the mechanical properties of quartz with thick walls to do stuff such as this and that patent you linked. i believe we need a
glass section on here.
|
|
Little_Ghost_again
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 985
Registered: 16-9-2014
Member Is Offline
Mood: Baffled
|
|
Hi
I just wanted to point out that most modern microwave ovens (at least in uk) have features like defrost setting etc, these dont reduce the power of
the magnetron but instead reduce the time it is on for.
So for example stick in a chicken turn to full power then choose defrost, the magnetron fires up (you here the transformer hum away) for a little bit
then turns off, the plate continues to rotate and after a bit the magnetron fires up for a little bit then turns off again etc etc etc.
So using that saves you having to rest the magnetron, plus most will over heat the transformer and cut out by temp sensor way before you damage it,
the cheaper the microwave oven the better. this is because its cheaper to just have one setting for the magnetron and the manufacture just adjusts the
time it fires for depending on how long and what setting you use. Sorry did that make any sense?
Dont ask me, I only know enough to be dangerous
|
|
Texium
|
Thread Moved 22-11-2023 at 19:00 |
Pages:
1
2 |