Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Nitrocellulose grain!
SAM4CH
Hazard to Others
***




Posts: 162
Registered: 16-7-2004
Location: TA
Member Is Offline

Mood: PERFECT

[*] posted on 16-1-2005 at 11:51
Nitrocellulose grain!


How can I make a grain of Nitrocellulose (gun cotton) to using it for my Gun!?
I tried with aceton to dissolve it but I faced many problem:(




Sam
View user's profile View All Posts By User This user has MSN Messenger
Taaie-Neuskoek
Hazard to Others
***




Posts: 222
Registered: 14-5-2004
Location: Zermany
Member Is Offline

Mood: Botanical!

[*] posted on 17-1-2005 at 00:04


Although I would recommend AGAINST the use of home-made NC in your gun, you should first get as much as possible info on the composition of the gunpowder you normaly use. Is it a handgun (like 9mm?) or is it a long-barrel rifle?

This is a hell of a difference, as gunpowder for a rifle needs to be 'slow', and for a handgun it is normally fast.

To get the grains, I would take tisseus, separate the individual layers, wet them, and dry them in the oven at 120°C for 10 minutes. Then try to cut them in very smal pieces with a scalpel or another very sharp knife. This will give you very small pieces, although it will take you a lot of time. Another option would be to purchase pure cellulose, in powderform. This would allow you to nitrate the powder, and get a powder NC.

Again, using this in a gun you hold in your hands is just plain stupid, as you don't know what kind of 'burnrate-slowers' they put in commercial gunpowder.
Note also that they sometimes add a few % of NG to the gunpowder.
Be aware that putting LESS then the minimal charge in a gun also can cause blow-ups, I've read a lot of articlaes about blown up revolvers caused by putting too less gunpowder in a shell....be carefull....




Never argue with idiots, they drag you down their level and beat you with experience.
View user's profile View All Posts By User
Pyroz
Hazard to Self
**




Posts: 76
Registered: 27-12-2004
Member Is Offline

Mood: curious...

shocked.gif posted on 17-1-2005 at 00:46
no way


if you start packing raw NC into your gun your asking for a muzzle breach--- its pure suicide! Your gun is already under enormous pressure-- putting a raw product into a gun without knowing its pressure volume could cause a detonation! Pls be careful!
View user's profile View All Posts By User
vulture
Forum Gatekeeper
*****




Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline

Mood: No Mood

[*] posted on 17-1-2005 at 12:25


1) This is practical pyrotechnics/HE --> Not allowed.
2) There are enough topics about nitrocellulose --> SEARCH before you post.

Closed.




One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
View user's profile View All Posts By User

  Go To Top