Protium
Harmless
Posts: 27
Registered: 25-12-2004
Location: Point Of Return (Subject To 15% Restocking Fee)
Member Is Offline
Mood: unenlightened
|
|
Polystyrene (styrofoam) depolymerization to styrene?
Polystyrene (styrofoam) depolymerization to styrene?
Does anybody know?
Can one simply dissolve styrofoam cups in a solvent to obtain styrene?
It just depends on how you look at it...
|
|
Organikum
resurrected
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2336
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
No.
Thermal depolymerisation of PS yields crude styrene, dry distillation under exclusion of air.
Styrene is to 50% in polyester resin and often OTC in pure form.
Look at your automobile supply house for this.
/ORG
|
|
cyclonite4
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 480
Registered: 16-11-2004
Location: is unknown
Member Is Offline
Mood: Amphoteric
|
|
I've also found 60% styrene available as "resin" at my local hardware store. Along side of it they sell 70% MEKP as a polymerisation
catalyst.
\"It is dangerous to be right, when your government is wrong.\" - Voltaire
|
|
Protium
Harmless
Posts: 27
Registered: 25-12-2004
Location: Point Of Return (Subject To 15% Restocking Fee)
Member Is Offline
Mood: unenlightened
|
|
What would be a good method of extracting, recrystallizing or otherwise purifying from these resins? What would be ideal solvents?
Organikum mentioned that styrene could be distilled under exclusion of air. Would this just rewuire a strong vacuum or could one fill distillation
apparatus with easily generated CO2?
Also, while distilling, upon reondensation would styrene be in a liquid or solid form that would plug up distillation apparatus?
It just depends on how you look at it...
|
|
budullewraagh
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 168
Registered: 1-8-2004
Location: new york
Member Is Offline
Mood: Aliphatic
|
|
i thought that dissolving polystyrene in an organic solvent, say acetone, would monomerize it
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Why?
It usually takes rather more than that to break a carbon-carbon bond.
|
|
bio2
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 447
Registered: 15-1-2005
Member Is Offline
Mood: No Mood
|
|
Here's something from the Hive I copied with some numbers I added.. Am ready to do this and am looking for someone who already has to correspond
with.
The chinese patent says: Bookmark Reply
Roughly translated:
In a reaction vessel was placed:
Styrene 21.7 g 104.15gm = 210mm bp145.2, 33.6@10mm mp-30,6 d.906 1mole or 1g
Sulfur S8 37.6 g 256.48gm = 150mm 714mm 1.73g
Ammonia 50 ml 17.03gm D.91 25% = 11.38g 670mm 3.19m .52g
Ethanol 30 ml 46.07gm d.81 96% = 23.33g 510mm 2.43m 1.07g
Under stirring and heated at 93-95 C for 3-4 hours. Fluids were evaporated from the mixture, it was allowed to cool, and extracted 3 times with 500 ml
hot water. The decolorized solution after standing yielded 26.7 g (97%) white sheets having MP of 157-158 C and BP of 280-290. (Phenylacetamide
C8H9NO)
100 g of the above phenylacetonitrile and 80 ml HCl were added to 150 ml water and refluxed for 2-3 hours. After cooling to room temp, a precipitate
formed and was filtered and recrystallized from 1:2 ethanol/water to yield 84 g (84%) of shining white crystals. (Phenylacetic acid C8H8O2)
If desired, I can try to translate the rest of the patent.
EDIT: Guys, it looks like they're depolymerizing polystyrene to get their styrene. Could this mean meth from styrofoam?
--------------------------------------------------------------------------------
Catching a buzz @ the Hive
Ammonia % Bookmark Reply
--------------------------------------------------------------------------------
They use aqueous ammonia ? percentage ? and ethanol in 95% ?
--------------------------------------------------------------------------------
They don't say. I guess that's part of the proprietary secret. The ammonia is aqueous, percentage unknown, and I would imagine that a little
water in the alcohol wouldn't matter, seeing as how the ammonia is dissolved in water.
Perhaps from stoichiometry it could bee guestimated. I would imagine it would be one of the standard percentages, like 10 or 28 %. My money's on
7 or 10%.
More of the patent:
Preparation of styrene:
A distillation setup was assembled. 100 g powdered scrap polystyrene was added and heated to 340 C or higher. Distillate over 340 C was collected and
assumed to be styrene. Still, color was rather crimson, and impure. The impure product was mixed uniformly with 5% by volume sulfuric acid and let
stand for 3h to remove impurities, then rinsed 3 times with brine, dried with anhydrous sodium sulfate, added antipolymerization additives. The
portion boiling at 145-146 C was collected to yield 89 g (89%) styrene.
--------------------------------------------------------------------------------
|
|