metalresearcher
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 737
Registered: 7-9-2010
Member Is Offline
Mood: Reactive
|
|
Is this SiC or Si metal ?
I heated fine quartz sand with crushed charcoal with an electric arc (welder + carbon rods, about 1.5-2kW) for a few times, each time 1-2 minutes and
adding some charcoal + sand intermediate. It heated to at least 2000-2500C.
I saw very small spheres during the arcing.
After cooling down I still see these very small spheres (<1mm dia) on the charcoal. See here a movie of the cooled matter (image size about 30mm
wide).
http://www.metallab.net/jwplayer/video.php?f=/clips/MVI_5452...
What is it ? I guess Si and / or SiC.
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Could you try measuring the density?
|
|
metalresearcher
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 737
Registered: 7-9-2010
Member Is Offline
Mood: Reactive
|
|
No, I don't have scales which weigh sub-milligram quantities and sub-cubic millimeter volumes.
|
|
chornedsnorkack
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 553
Registered: 16-2-2012
Member Is Offline
Mood: No Mood
|
|
The densities are 2,33 for Si and 3,21 for SiC.
Are there any liquids with density in that range, which do not react with either Si or SiC?
|
|
Praxichys
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline
Mood: Coprecipitated
|
|
I would imagine that since they are spheres, some melting had to occur.
Silicon melts at 1414C
SiO2 melts at ~1700C
SiC melts at 2730C
Even in an arc, I find it unlikely that the SiC would have melted to form beads like that. That's almost 5000 degrees F.
You might be able to test it using hardness. SiC is very hard. You may be able to find a piece of hardened steel that quartz and silicon cannot
scratch, but SiC would. This could be a good small scale test.
I do not know much about the chemical stability of SiC but perhaps digesting in molten NaOH and then some strong acid would get rid of anything but
the SiC?
|
|
etoxiran
Harmless
Posts: 9
Registered: 3-10-2010
Member Is Offline
Mood: No Mood
|
|
Here is a little hint.
http://www.liquiflo.com/v2/files/pdf/lit/Chemical_Resistance...
I would test it with hydrofluoric acid, SiC seems to be resistant, silicone and silicone dioxide not
|
|
Texium
|
Thread Moved 22-11-2023 at 19:31 |