metalresearcher
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 737
Registered: 7-9-2010
Member Is Offline
Mood: Reactive
|
|
Where is YTONG made from ?
I have been using this excellent construction material for high-temperature lab applications although not designed for this, including metal melting.
It withstands temperatures till 1350C for at least 10 re-uses.
https://en.wikipedia.org/wiki/Autoclaved_aerated_concrete
I am curious what is is made of. Al2O3 or CaO ?
|
|
careysub
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
Addressing aerated autoclaved cements generally, not that one product:
It no doubt has variable composition - like concretes/cemenets generally, since it is really a processing method rather than a formula.
Here is one vendor, and even for this one product the proporations at least seem variable:
http://www.csr.com.au/Our-Products/MSDS/Hebel%20Autoclaved%2...
Predominantly calcium silicate hydrate, with a substantial admixture of crystalline silica (aka sand), and goodly portion of portland cement, which is
itself a calcium silicate cement.
[Edited on 8-9-2014 by careysub]
|
|
markx
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 645
Registered: 7-8-2003
Location: Northern kingdom
Member Is Offline
Mood: Very Jolly
|
|
AAC is made by first mixing portland cement, gypsum, milled sand, hydrated lime and aluminium powder with water to form a liquid slurry. Depending on
formulation a number of other fillers, binders and modificators may be added (e.g flue ash, blast furnace slag, milled limestone, thickeners,
superplastisizers etc). This mixture will be cast into huge block type molds where the aluminium powder starts to react with the alkaline components
and releasing hydrogen gas. This process will expand the mixture and give it the porous bubbly structure that we all know. In about 40minutes the mix
has expanded and set to a preliminary strenght. The mold is dissassembled and the resulting slab is cut into blocks with wires. These heaps of blocks
will then be further cured in a steam autoclave at high temperature and pressure (I can't recall by heart but in the order of 200C and 10atm), this
steam treatment will cure the blocks and give them the final strength and durability.
Exact science is a figment of imagination.......
|
|
PHILOU Zrealone
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
Other asset, aside from bad heat transfert (good insulation due to bubbles) is the resistance of the material to static or slow increasing pressure
(not to shock!) .
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
Texium
|
Thread Moved 21-11-2023 at 14:09 |