Pages:
1
..
20
21
22
23
24
..
104 |
MrHomeScientist
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
Yes, like boiling chips the noodles (like just about anything else) will increase the rate of bubbling by providing lots of nucleation sites. Try the
same thing with salt instead of noodles and see if you notice the same effect.
|
|
alexleyenda
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 277
Registered: 17-12-2013
Location: Québec, Canada
Member Is Offline
Mood: Busy studying chemistry at the University
|
|
Alright, I know I noticed similar effect with other things, but the effect with these noodles is extreme, far stronger than almost anything else,
probably because of their huge surface area.
|
|
Pumukli
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 696
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
Suggest an OTC-ish olefine!
Hello All,
Could someone suggest an OTC-ish olefine, which is:
- preferably has the R-CH=CH2 or R-CH=CH-R' structure,
- preferably has its boiling point above 60 Celsius,
- and is not an aromatic one? (I mean one without an aromatic ring.)
By "OTC-ish" I mean: one can get it as an OTC product or can prepare it with a very simple one-step synthesis from an OTC product.
I can think of eugenole and styrene but these are aromatic. Cyclohexene on the other hand is not OTC-ish afaik.
Good brain-storming!
[Edited on 4-6-2014 by Pumukli]
|
|
EdMeese
Harmless
Posts: 16
Registered: 25-1-2013
Member Is Offline
Mood: No Mood
|
|
High-oleic vegetable oil is the first that comes to mind.
|
|
Pumukli
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 696
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
Ah, yeah, unsaturated oils are OTC and boil above 60 C it is sure.
But I'd prefer something more "well-defined", not an oily mixture. And definitely not something poly-olefinic.
But thanks anyway, your suggestion is appropriate for the original (lax) requirements.
|
|
EdMeese
Harmless
Posts: 16
Registered: 25-1-2013
Member Is Offline
Mood: No Mood
|
|
Pinene then. Picky picky :-)
Dehydration of menthol should be pretty straighforward.
Maltol isn't "really" aromatic.
If nonconjugated dienes will do you've got a bunch of monoterpenes from flavors: limonene, gerionol, etc.
Allyl hexanoate is pineapple flavor.
Fumaric acid is in some supplement shops, maybe homebrewing.
So, get to it.
|
|
Pumukli
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 696
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
Search is over it seems.
Fumaric acid looks promising.
And is OTC here as well.
And the dehydrated menthol suggestion was also a good one!
Thanks!
|
|
alexleyenda
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 277
Registered: 17-12-2013
Location: Québec, Canada
Member Is Offline
Mood: Busy studying chemistry at the University
|
|
What would the greenish deposit on copper wire in a chlorate cell (not used as electrode in the liquid, only in the air) be? My guess is copper
chloride, am I right?
PS: I know it is not a good idea to put copper in there, I was juste making a small scale test before I get my MMO electrodes for the real thing
[Edited on 6-6-2014 by alexleyenda]
|
|
Zyklon-A
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
alexleyenda , probably. It will be quite impure, most likely it will be a mixture of copper chloride, copper hydroxide hydrates and
lots of other crap.
I once used a copper wire to suspend an MMO anode above the solution. It soon was covered in a green coating as well. Lots of oxygen, minute amounts
of chlorine and maybe chlorine oxides are evolved. Also acidified chloride aerosols from bubbling, so it could be many things. The wire soon was so
deteriorated, that it just snapped off.
Due to the high amperage I was using, the wire was over 100°C. Hot copper reacts pretty fast with oxygen and chlorine.
|
|
alexleyenda
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 277
Registered: 17-12-2013
Location: Québec, Canada
Member Is Offline
Mood: Busy studying chemistry at the University
|
|
Hmmm you are right about the hydroxide, I forgot about that one ! And yeah it did the same thing to me, the wire broke :p That's why I'm testing
before I receive my real electrodes !
|
|
Mailinmypocket
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1351
Registered: 12-5-2011
Member Is Offline
Mood: No Mood
|
|
When an experiment calls for k50 montmorillonite clay, is there anything for which it can be substituted for?
|
|
sparkgap
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1234
Registered: 16-1-2005
Location: not where you think
Member Is Offline
Mood: chaotropic
|
|
Depends. For one, you didn't quite elaborate on the nature of the "experiment" you speak of. For all we know, this could be something for which kitty
litter might suffice.
sparky (~_~)
"What's UTFSE? I keep hearing about it, but I can't be arsed to search for the answer..."
|
|
Mailinmypocket
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1351
Registered: 12-5-2011
Member Is Offline
Mood: No Mood
|
|
Thanks, I should have elaborated on that, it's used as a catalyst in the synthesis of 7-hydroxy 4-methylcoumarin as per experiment PG-2 in the
following document:
http://www.dst.gov.in/green-chem.pdf
|
|
Gooferking Science
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 97
Registered: 17-7-2013
Location: Somewhere in Kansas, USA...
Member Is Offline
Mood: Halogenated
|
|
I have an oil burner ignition transformer that puts out 10kv at 23 mA. Is there an easy way to limit that current down to just a few mA? Could a
resistor be used to limit the current?
|
|
arkoma
Redneck Overlord
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1761
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
^^yes. Use Ohm's law. Remember that only several milliamps is FATAL if they flow through your heart.
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
If you use a resistor, you will also drop voltage (the amount depends on your load). Make sure that you use a resistor that can take the power (up to
230 W).
An inductive ballast is also an option. This has the advantage of dissipating less power.
|
|
alexleyenda
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 277
Registered: 17-12-2013
Location: Québec, Canada
Member Is Offline
Mood: Busy studying chemistry at the University
|
|
In a chlorate cell, the hydroxide solution you bubbles Cl2 into, does it needs to be replaced from time to time? I guess it does, I just found strange
that it was not said in any thread I read about it.
Also, something strange happened in my chlorate cell. It's been running for around 4 hours, I stopped it, but the anode kept bubbling weakly. Any Idea
why?
Another also :p I tested the pH of my cell with universal stripes, it did not work, it seemed like it was destroyed by the sample of water. I tested
with phenol red, same thing, it became colorless. I guess the chlorine oxidate the dye and destroys it? Btw, I then tested it with bromothymol blue
and finaly got a result : the pH was between 1 and 6.
[Edited on 11-6-2014 by alexleyenda]
[Edited on 11-6-2014 by alexleyenda]
|
|
plastics
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 141
Registered: 6-11-2009
Member Is Offline
Mood: No Mood
|
|
How much sulphur trioxide would I need to dissolve in 100ml of 98% sulphuric acid to obtain 65% oleum (w/w)?
I assume I initially need to add enough to convert the outstanding 2% water to obtain 100% sulphuric acid?
|
|
arkoma
Redneck Overlord
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1761
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
Is my hydrometer/specific gravity affected by altitude?
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Yes, but not by much. The density of air will be less, which will cause you to measure a slightly lower specific gravity (as some of your sample
volume is air with a hydrometer).
Gravitational effects do not matter, as you are measuring relative specific gravity with a hydrometer.
|
|
Zyklon-A
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
Quote: Originally posted by plastics ![](images/xpblue/lastpost.gif) | How much sulphur trioxide would I need to dissolve in 100ml of 98% sulphuric acid to obtain 65% oleum (w/w)?
I assume I initially need to add enough to convert the outstanding 2% water to obtain 100% sulphuric acid? |
You probably should not be making pyrosulfuric acid if you can't answer this question.
|
|
arkoma
Redneck Overlord
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1761
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
Quote: Originally posted by Cheddite Cheese ![](images/xpblue/lastpost.gif) | Yes, but not by much. The density of air will be less, which will cause you to measure a slightly lower specific gravity (as some of your sample
volume is air with a hydrometer).
Gravitational effects do not matter, as you are measuring relative specific gravity with a hydrometer. |
That was what I thought, but wanted some confirmation. Thanx cheddite.
Edit--@4000 feet above sea level here, twice as high as "home", Twentynine Palms
[Edited on 6-14-2014 by arkoma]
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
plastics
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 141
Registered: 6-11-2009
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Zyklonb ![](images/xpblue/lastpost.gif) | Quote: Originally posted by plastics ![](images/xpblue/lastpost.gif) | How much sulphur trioxide would I need to dissolve in 100ml of 98% sulphuric acid to obtain 65% oleum (w/w)?
I assume I initially need to add enough to convert the outstanding 2% water to obtain 100% sulphuric acid? |
You probably should not be making pyrosulfuric acid if you can't answer this question. |
OK smart arse. If you can't answer the question just keep quiet and stop filling the forum up with pointless shite.
Just for your delectation here is a picture of 120g SO3 sitting in a flask next to the tube furnace that generated it, waiting to be turned into
oleum. Seeing as you think I am so stupid, perhaps I should just add 100ml warm water and see what happens?
So do you know the answer or not?
|
|
bismuthate
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 803
Registered: 28-9-2013
Location: the island of stability
Member Is Offline
Mood: self reacting
|
|
NO NO NO. Do not ever just add warm water (or any water at that) to that much SO3. That will send sulfuric acid everywhere and you won't get out
unscathed.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
*Intensive sigh*
bismuthate, he was being sarcastic.
plastics, first calculate stoichiometrically how much SO3 is needed for that last 2% of water, then calculate how much additional
SO3 you would need to add so that 65% of the H2SO4 is converted to oleum.
Funny thing is, I'm not sure of the chemical formula of oleum, so I can't help you there.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
Pages:
1
..
20
21
22
23
24
..
104 |