confusedpizza
Harmless
Posts: 8
Registered: 5-4-2014
Member Is Offline
Mood: No Mood
|
|
Pennies and vinegar
Gen Chem student here. Likely a dumb question to follow.
When you put an old penny (pre-1982, so made of copper and zinc) in vinegar, which dissolves first - the copper or the zinc? Assuming the copper,
does this reaction happen?
2Cu(s) + 2C2H3O2H(aq) + 2H2O(l) ⇆ Cu(C2H3O2)2(aq) + Cu(OH)2(aq) +4H+(aq)
I'm basing the reaction on the fact that vinegar is mostly acetic acid and water and Copper could combine with the hydroxide and the acetate ion.
Does this reaction happen, and if not, what am I doing wrong?
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4301
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
The reaction as you've written it cannot happen, as it isn't balanced. You have no net charge on the reactants side, and four positive charges on the
products.
For copper to react with any acid other than nitric, you need another oxidizing agent (in this case, oxygen from the air). Water will be produced.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
confusedpizza
Harmless
Posts: 8
Registered: 5-4-2014
Member Is Offline
Mood: No Mood
|
|
What happens if I boil it?
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4301
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
It will get hot. But it's still not going to allow an unbalanced equation to happen (are those electron supposed to just vanish?).
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
LOL.
C'mon, help him out of his misery. ![:D](./images/smilies/biggrin.gif)
[Edited on 11-4-2014 by blogfast25]
|
|
confusedpizza
Harmless
Posts: 8
Registered: 5-4-2014
Member Is Offline
Mood: No Mood
|
|
Hahaha
So essentially I'm trying to figure out how something like this works:
http://www.ehow.com/how_8622662_make-glow-powder-household-i...
What is the reaction that is happening?
|
|
confusedpizza
Harmless
Posts: 8
Registered: 5-4-2014
Member Is Offline
Mood: No Mood
|
|
Thanks ![:D](./images/smilies/biggrin.gif)
(and it's *her* ;-P)
|
|
Zyklon-A
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
The copper and zinc isn't an alloy, it's ~98% zinc plated with ~2% copper, the copper will protect the zinc, so nothing will happen, in the reaction.
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4301
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
2 Cu + 4 HC2H3O2 + O2 --> 2 Cu(2H3O2)2 + 2 H2O
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
gdflp
Super Moderator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1320
Registered: 14-2-2014
Location: NY, USA
Member Is Offline
Mood: Staring at code
|
|
Try hydrogen peroxide, then the copper will dissolve.
@DraconicAcid Having fun? LOL
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4301
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Quote: Originally posted by Zyklonb ![](images/xpblue/lastpost.gif) | The copper and zinc isn't an alloy, it's ~98% zinc plated with ~2% copper, the copper will protect the zinc, so nothing will happen, in the reaction.
|
That's after 1982; the OP specified pre-1982 pennies, which were 95% copper and 5% zinc.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
gdflp
Super Moderator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1320
Registered: 14-2-2014
Location: NY, USA
Member Is Offline
Mood: Staring at code
|
|
The pre-1982 pennies also had some tin in them I believe. At least, the really old ones did, they might have stopped that in 1944.
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4301
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
From Wiki: http://en.wikipedia.org/wiki/Penny_%28United_States_coin%29
1856–1864 88% copper, 12% nickel (also known as NS-12) 4.67
1864–1942 bronze (95% copper, 5% tin and zinc) 3.11
1943 zinc-coated steel (also known as 1943 steel cent) 2.67
1944–1946 brass (95% copper, 5% zinc) 3.11
1946–1962 bronze (95% copper, 5% tin and zinc)
1962–1981 brass (95% copper, 5% zinc)
1982 varies: brass (95% copper, 5% zinc) or copper-plated zinc (97.5% zinc, 2.5% copper)[7] 3.11 or 2.5
1983–present 97.5% zinc, 2.5% copper (core: 99.2% zinc, 0.8% copper; plating: pure copper)[8] 2.5
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
confusedpizza
Harmless
Posts: 8
Registered: 5-4-2014
Member Is Offline
Mood: No Mood
|
|
Assuming 62-81 pennies. If I want to make glow in the dark powder, what do I do and why? I may actually even do it, but I really am primarily
concerned with what's happening and why.
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4301
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Isn't it the zinc sulphide that's phosphorescent?
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
HgDinis25
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 439
Registered: 14-3-2014
Location: Portugal
Member Is Offline
Mood: Who drank my mercury?
|
|
When you add Copper to Acetic Acid you get nothing. However, Copper always has a thin oxide layer of Copper(II) Oxide. This will react with Acetic
Acid:
CuO(s) + 2HAc(aq) --> Cu(Ac)2(aq) + H2O(l)
So, you've dropped the penny into Acetic Acid. The Copper(II) Oxide will react but Copper won't. However, in the course of time, Copper will be
oxidized by Oxygen in the atmosphere, as follows:
2Cu(s) + O2(g) --> 2CuO(s)
And the Copper(II) Oxide produce will react further with Acetic Acid. And this is the entire process of dissolving Copper in Acetic Acid.
Now, when you boil the solution, you'll be speeding up the Oxidation reaction and feeding more Oxygen into the reaction mixture, so Copper will
dissolve faster.
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by HgDinis25 ![](images/xpblue/lastpost.gif) | 2Cu(s) + O2(g) --> 2CuO(s)
And the Copper(II) Oxide produce will react further with Acetic Acid. And this is the entire process of dissolving Copper in Acetic Acid.
|
No, it bloody well isn't. Even in vinegar the H3O<sup>+</sup> concentration is high enough so that CuO cannot form,
unless the acid has been depleted nearly completely.
In essence:
HOAc + H2O < === > H3O<sup>+</sup> + OAc<sup>-</sup>
O2 + 4 H3O<sup>+</sup> + 4 e === > 6 H2O (reduction of O2 to water in acid conditions)
Cu === > Cu<sup>2+</sup> + 2 e (oxidation of copper to cupric ions)
Cu(s) + 1/2 O2(aq) + 2 H3O<sup>+</sup> === > Cu<sup>2+</sup>(aq) + 3 H2O(l)
The acetate ions are spectators. No CuO is ever formed.
But this is a very slow process. Hydrogen peroxide would speed it up considerably.
[Edited on 11-4-2014 by blogfast25]
|
|
vmelkon
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 669
Registered: 25-11-2011
Location: Canada
Member Is Offline
Mood: autoerotic asphyxiation
|
|
I think HgDinis means that copper gets covered by Cu(OH)2/CuCO3 mixture, called patina.
Anyway as for the original question, I would stick with pure chemicals, specially for making glow in the dark powder. Use electrical wire as your
source of copper.
One method is to have some ZnSO4 dissolves in water. Bubble some H2S into it. Filter out the ZnS. Make a very dilute solution of CuSO4 (I think 0.005
M).
Add to the ZnS and heat strongly.
Signature ==== Is this my youtube page? https://www.youtube.com/watch?v=tA5PYtul5aU
We must attach the electrodes of knowledge to the nipples of ignorance and give a few good jolts.
Yes my evolutionary friends. We are all homos here.
|
|
annaandherdad
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 387
Registered: 17-9-2011
Member Is Offline
Mood: No Mood
|
|
confused, take a look at the youtube videos of Gizmodium for making ZnS and then glow-in-the-dark powders. If you want to start with pennies, try
post 1982. A method we used to get pure ZnSO4 from these pennies is described at http://www.sciencemadness.org/talk/viewthread.php?tid=23059#...
Any other SF Bay chemists?
|
|
HgDinis25
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 439
Registered: 14-3-2014
Location: Portugal
Member Is Offline
Mood: Who drank my mercury?
|
|
Quote: Originally posted by blogfast25 ![](images/xpblue/lastpost.gif) | Quote: Originally posted by HgDinis25 ![](images/xpblue/lastpost.gif) | 2Cu(s) + O2(g) --> 2CuO(s)
And the Copper(II) Oxide produce will react further with Acetic Acid. And this is the entire process of dissolving Copper in Acetic Acid.
|
No, it bloody well isn't. Even in vinegar the H3O<sup>+</sup> concentration is high enough so that CuO cannot form,
unless the acid has been depleted nearly completely.
In essence:
HOAc + H2O < === > H3O<sup>+</sup> + OAc<sup>-</sup>
O2 + 4 H3O<sup>+</sup> + 4 e === > 6 H2O (reduction of O2 to water in acid conditions)
Cu === > Cu<sup>2+</sup> + 2 e (oxidation of copper to cupric ions)
Cu(s) + 1/2 O2(aq) + 2 H3O<sup>+</sup> === > Cu<sup>2+</sup>(aq) + 3 H2O(l)
The acetate ions are spectators. No CuO is ever formed.
But this is a very slow process. Hydrogen peroxide would speed it up considerably.
[Edited on 11-4-2014 by blogfast25] |
http://www.newton.dep.anl.gov/askasci/chem03/chem03505.htm
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4552
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
I didn't want to start a new thread, so I figured I'd post this here since it's all about pennies.
A few weeks ago I dissolved the zinc core of a new penny in some HCl to obtain the thin copper jacket, and I figured I'd boil down the remaining
solution to obtain zinc chloride for future use. I did this successfully.
The only issue was that it was a rather brownish tan color instead of white like zinc chloride is supposed to be. I started with a clean penny, so
there shouldn't have been impurities from the exterior, and I didn't use an oxidizer, so all of the copper is intact.
Does anybody know what might have caused this impurity?
|
|
macckone
Dispenser of practical lab wisdom
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
The core isn't pure zinc. I don't know what the alloy is but suspect
there are copper and aluminum in it. DraconicAcid posted that the core is .8%
copper with a reference.
And it is possible some small amount of copper was dissolved from the plating.
Finally if there are iron contaminants in your HCl, it will be a contaminant.
Recrystallizing your zinc chloride is probably your best bet for a pure product.
My suspicion is that the contaminant is iron given the color. copper would
be more greenish.
You would want to dissolve 2/3rds of your zinc chloride in minimum water,
let stand and filter. The impurities should not dissolve as none of them are
likely to be as soluble as the zinc chloride. Then add some pure HCl to the
zinc chloride and crystallize it. The HCl is necessary to prevent oxide formation.
HCl can be purified by distillation in glass equipment as the 20% azeotrope
to remove iron.
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4552
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Thanks for the advice, my HCl is quite pure though. I've used it for many other purposes and there was no contamination from it. I think that it would
be more likely that the impurities are from the coin itself. Maybe pennies contain a small amount of iron as well as copper and aluminum? I'll redo it
with a few more pennies and see if I get the same result, and if I do then I'll recrystallize that larger amount of zinc chloride.
|
|
annaandherdad
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 387
Registered: 17-9-2011
Member Is Offline
Mood: No Mood
|
|
For the content of current american pennies, see the link:
http://www.sciencemadness.org/talk/viewthread.php?tid=23059#...
Any other SF Bay chemists?
|
|