Buckyballz
Harmless
Posts: 2
Registered: 26-2-2014
Member Is Offline
Mood: No Mood
|
|
Storing con. HNO3 and other jewels
I'm new to this. And I am finally living the dream and putting together a home chem lab . I have some concentrated HNO3 and HCL on order and I am worried about storage. Can they be stored together? Do I need a acid storage
cabinet with the fancy blue paint?? Because, I don't have $500+ to spend on a cabinet . Any advice / strict orders would be appreciated!!!
![:D](./images/smilies/biggrin.gif)
|
|
Brain&Force
Hazard to Lanthanides
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1302
Registered: 13-11-2013
Location: UW-Madison
Member Is Offline
Mood: Incommensurately modulated
|
|
Keep all acids away from any metals. I left a fairly large Nd magnet in a fume hood seething with HCl and it turned into a pile of rust.
Nitric and hydrochloric acids form the toxic nitrosyl chloride in aqueous solution. I don't know about gas phase, but I advise storing them apart for
safety's sake. Neither should be too much of a problem for regular cabinets.
My school stores nitric acid in locked metal cabinets.
At the end of the day, simulating atoms doesn't beat working with the real things...
|
|
bfesser
|
Thread Moved 27-2-2014 at 05:09 |
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2690
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
If you are worried about the fumes, just place each bottle inside a larger plastic container (Rubbermaid pitcher or other storage container) and you
can even put some NaHCO3 inside the plastic container to absorb any fumes. I have done that before for acids.
|
|
Zyklon-A
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
Brain&Force, Yes HCl(aq) reacts with Nd magnets to isolate boron.
|
|
Acidum
Harmless
Posts: 39
Registered: 2-5-2013
Location: Serbia
Member Is Offline
Mood: Sublimed
|
|
By far, this is THE best solution (no pun intended) for storing of acids that I have seen (excluding professional cabinets, of course) - bucket with
bottom covered in some adsorbing material:
![](http://i1373.photobucket.com/albums/ag387/sciencedean/20140104_201114_zps52e3a16f.jpg)
By the way, image made by our member ScienceHideout, placed here without any question, and stolen from Tour My Lab topic: original post. ![:P](./images/smilies/tongue.gif)
Nice lab, by the way!
[Edited on 27-2-2014 by Acidum]
...and then I disappeared in the mist...
|
|
chemrox
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
Or you can buy a polymer cabinet from Home Depot like stores (please boycott Wal-mart) as long as you have a ventilated area for it.
"When you let the dumbasses vote you end up with populism followed by autocracy and getting back is a bitch." Plato (sort of)
|
|
testimento
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 351
Registered: 10-6-2013
Member Is Offline
Mood: No Mood
|
|
I have found wine and beer kegs that are made of glass a good storage option for short to medium for nitric acid. These bottles look a little like
massive boiling flasks, and they can be stoppered with silicone or rubber plugs. I used tight rubber plugs which I lined with PTFE. This prevents air
from getting in, but when the acid decomposes slightly, the pressure is allowed to leave without bursting the bottle. These kegs range from few liters
to even up to 50, or even 100 liters and are usually supplied with a protective, plastic basket that allows easy handling.
Stainless steel, like 316, when clean(washed with nitric and hydrofluoric acid), will hold well against RFNA and WFNA. You will need pressure
compensation though for any nitric acid over 80%, or it may explode the container.
Chemicals can be stored well without any fume hoods. The safest option is to make any box or cabinet where you have line attached to rooftop. This
creates a small suction, and if any noxious fumes are evolved, they cannot exit the cabined because the very small vacuum difference formed and they
are safely vented out. For other storage, take them off rooms where you live, like warehouse. Normal chemicals wont cause fumes when handled
correctly, like HCl and nitric acid. Only very toxic stuff like cyanides or toxins should be handled with special care.
|
|
Buckyballz
Harmless
Posts: 2
Registered: 26-2-2014
Member Is Offline
Mood: No Mood
|
|
Wow! Thanks everyone!! That was such a big help! I might go with a combination
of advice from everyone. Lots of good ideas here. Good to know I don't have to spend $800 for a fancy cabinet. Cheers!
|
|
MrHomeScientist
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
Buckyballz: Did you happen to send me a message on YouTube about this? If not, your question is eerily similar to one I just got a
few days ago. If it was you, check your inbox!
|
|
chemrox
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
"Lined with PTFE.." How are you doing that?
"When you let the dumbasses vote you end up with populism followed by autocracy and getting back is a bitch." Plato (sort of)
|
|
Zyklon-A
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
chemrox , I tend to line my rubber stoppers with PTFE tape when containing chemicals that react with rubber. Eg. Chlorine, nitric
acid, iodine vapour ect.
Simply wind "plumbers Tape" around your stoppers. Several layers are easily enough.
[Edited on 28-2-2014 by Zyklonb]
|
|
testimento
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 351
Registered: 10-6-2013
Member Is Offline
Mood: No Mood
|
|
I can obtain PTFE sheets per square meter from 50 to 200mic thick. I cut round pieces from these so they will fit against lips of bottles and when I
screw the top in, it will compress a tight seal so only glass and PTFE are explosed on chemicals. Tape would work too, though the top seal has seams
and will not be proof. If you just wind plumber tape around threads, the chemical will still attack the bottle top and this does not proofen the top
by any means, and if it leaky by nature, one should discard it instantly because taping wont fix it.
[Edited on 28-2-2014 by testimento]
|
|
DubaiAmateurRocketry
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 841
Registered: 10-5-2013
Location: LA, CA, USA
Member Is Offline
Mood: In research
|
|
Where did you get your concentrated nitric acid? I am moving to USA and I am worried that I can not put together a home lab
|
|
ScienceHideout
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 391
Registered: 12-3-2011
Location: In the Source
Member Is Offline
Mood: High Spin
|
|
Quote: Originally posted by Acidum ![](images/xpblue/lastpost.gif) | By far, this is THE best solution (no pun intended) for storing of acids that I have seen (excluding professional cabinets, of course) - bucket with
bottom covered in some adsorbing material:
[Pic was here]
By the way, image made by our member ScienceHideout, placed here without any question, and stolen from Tour My Lab topic: original post. ![:P](./images/smilies/tongue.gif)
Nice lab, by the way!
[Edited on 27-2-2014 by Acidum] |
Thanks a lot!
All of my chemical safety protocol and storage is backed up by Flinn Scientific in Illinois. They advocate storing chemicals like this, and they also
suggest storing HNO3 away from ALL other materials unless an acid cabinet is equipped with an HNO3 compartment (most aren't). If you look at the
picture of my chemical storage cabinet, all the way to the right in the very back you can see a translucent container with a blue lid. In here, there
is HNO3 in a poly-coated glass bottle in a plastic bag, with kitty litter in the bottom. Not to brag, but I am a bit of a self-proclaimed expert when
it comes to chemical storage. I would be happy to post all of my patterns in the prepublication section if you are interested.
Oh, and by the way, the bucket is actually fitted with a screw top adapter I got at Lowes for less then $10. It makes for easy airtight
opening/closing
[Edited on 2-3-2014 by ScienceHideout]
hey, if you are reading this, I can't U2U, but you are always welcome to send me an email!
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
As long as you aren't moving to Texas, and you have available space, starting a lab shouldn't be a problem.
It's relatively easy to make concentrated nitric acid from a nitrate salt and sulfuric acid (there are a plethora of threads on this). Dudadiesel also
sells it, although it is expensive to buy due to shipping costs.
|
|
shadow
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 52
Registered: 17-10-2007
Member Is Offline
Mood: No Mood
|
|
If he lives in Dubai, money shouldn't be an issue.
|
|
froot
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 347
Registered: 23-10-2003
Location: South Africa
Member Is Offline
Mood: refluxed
|
|
I've got my HNO3 in a glass stoppered conical flask that sits in a small plastic bucket on an open shelf and it's been like that for years. No effects
on nearby items.
We salute the improvement of the human genome by honoring those who remove themselves from it.
Of necessity, this honor is generally bestowed posthumously. - www.darwinawards.com
|
|
DubaiAmateurRocketry
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 841
Registered: 10-5-2013
Location: LA, CA, USA
Member Is Offline
Mood: In research
|
|
Quote: Originally posted by Cheddite Cheese ![](images/xpblue/lastpost.gif) |
As long as you aren't moving to Texas, and you have available space, starting a lab shouldn't be a problem.
It's relatively easy to make concentrated nitric acid from a nitrate salt and sulfuric acid (there are a plethora of threads on this). Dudadiesel also
sells it, although it is expensive to buy due to shipping costs. |
I am not going to Texas. Thanks for the link on that company, however they have only 70% Nitric acid, I dont think I'll find around 95% in US so it
looks like I have to distill for high purity.
|
|
ScienceHideout
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 391
Registered: 12-3-2011
Location: In the Source
Member Is Offline
Mood: High Spin
|
|
I don't think that anyone other than a professional chemical supplier would sell >70% HNO3. Unless you have a business and can order
from Sigma Aldrich, you would have to make it.
hey, if you are reading this, I can't U2U, but you are always welcome to send me an email!
|
|
Zyklon-A
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
Quote: |
As long as you aren't moving to Texas, and you have available space, starting a lab shouldn't be a problem. |
Really? Why does everybody think Texas is a waist-land and a hard place to start a lab?
I did it, nitric acid of any concentration is easy to obtain, as are all the chemicals I have ever needed, except for those used to produce illicit
narcotics.
|
|
Xenon1898
Harmless
Posts: 49
Registered: 19-1-2013
Location: United States
Member Is Offline
Mood: Researching
|
|
I read somewhere that Erlenmeyer flasks are not legal for private citizens to own in Texas. Not sure what else would be outlawed, but if the
legislators in Texas are going to do that then nothing would surprise me. They might as well outlaw mason jars too.
“If we knew what it was we were doing, it would not be called research, would it?”
-Albert Einstein
|
|
Hockeydemon
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 218
Registered: 25-2-2013
Member Is Offline
Mood: No Mood
|
|
Pretty much all glassware is illegal in Texas.. Here is there definition and list of illegal things:
Quote: |
"Chemical laboratory apparatus" means any item of equipment designed, made, or adapted to manufacture a controlled substance or a controlled substance
analogue, including:
(A) a condenser
(B) a distilling apparatus
(C) a vacuum drier
(D) a three-neck or distilling flask
(E) a tableting machine
(F) an encapsulating machine
(G) a filter, Buchner, or separatory funnel
(H) an Erlenmeyer, two-neck, or single-neck flask
(I) a round-bottom, Florence, thermometer, or filtering flask
(J) a Soxhlet extractor
(K) a transformer
(L) a flask heater
(M) a heating mantel or
(N) an adaptor tube
|
Texas is just an all around awful place - if you want to watch an incredibly frustrating documentary on netflix.. "The Revisionaries" is about the
Texas school boards and how they decide what shows up in public school curriculum. They flat out undermine science and imply creationism at every
turn. For example: "Evolution is xxxx, but there are some scientists who disagree with that theory".. It is extremely aggravating to watch, but it is
a well done documentary.
|
|