Pages:
1
2 |
Geomancer
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 228
Registered: 21-12-2003
Member Is Offline
Mood: No Mood
|
|
Reductive amination and water
Reductive aminations are usually thought to proceed through reduction of an imine. But imines are easily hydrolysed. In general, what effect does the
concentration of water have on the rate of reaction? Can one routinely use aqueous ammonia for primary amines? Are molecular sieves worthwhile?
Rhodium's site has a report that water has litttle effect on a certain class of compound (three guesses), but did not extend that observation
to any other compounds. In particular, I'm somewhat interested in isopropylamines from acetone.
|
|
Trolf
Harmless
Posts: 4
Registered: 22-4-2004
Location: Denmark
Member Is Offline
Mood: No Mood
|
|
I have thought about making this reaction too, but yes imines are very much sensitive to the pressence of water.
think u would have to use:
1. gaseous ammonia
2. A good compound to remove water from the reaction as it is formed from the reaction (MgSO4 ex.)
My question would be how do u reduce the imine (with something easily accessible)?
|
|
antibond
Harmless
Posts: 9
Registered: 23-11-2004
Member Is Offline
Mood: good
|
|
imine reduction
Problems during imine formation when water is present probably has alot to do with how highly substituted the ketone is and that is why silical gel
and mol sieves are used during this step especially with usnsubbed ketone. Avoid polymerization by removing water and keeping the reaction cold
during imine formation (0-5c) and reduction. Realize this runs contrary to popularized methods with unsubbed ketone but colder is better. Also,
reduction via hydrogenation may be different in that water may not have to be removed (friefelder). But hydrogenation isn't a popular method for
non-professionals. Using ammonia during imine formation is low yielding compared to monomethylamine. Have no idea how water affects the rate of the
reaction but my guess would be that it wouldn't make too much of a diff. with desirable ketones.
|
|
Organikum
resurrected
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2336
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
It depends on the method of imine reduction and the substrate.
Reduction with activated aluminium needs water to proceed, but usually gives results not better than 30% with unsubstituted substrates and ammonia in
water, somehow better with substituted substrates like hydroxyphenylacetones which form stable, not easily hydrolized imines.
Ammonia in methanol with Rayney nickel under pressure of 40-100atm in a autoclave gives yields of 90%+. Without water is understood.
A good alternative is the Leuckard with ammonium formate and without any solvent done in the microwave. Fast and high yielding at least at a small to
medium scale. Yields of 80% have been achieved with household microwaves, the dreaded "red tar" which made the Leuckard so unpopular for
many was almost not present.
[Edited on 24-11-2004 by Organikum]
|
|
Mendeleev
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 237
Registered: 25-12-2003
Location: USA
Member Is Offline
Mood: stoned
|
|
This is very interesting, could you please elaborate on this leuckhard?
Edit: About catalytic hydrogenations, there is a patent, which has dissapeared from the US patent office website which details a catalyst which could
potentially bypass the need for fancy and expensive catalysts made with rare metals like platinum, palladium, and rhodium. It is made by reacting
copper sulfate pentahydrate with barium or calcium hydroxide to get a catalyst consisting of cupric oxide, and calcium or barium sulfate. The patent
is US No. 2,828,343, but like I said, I couldn't find it on the website. I would like to know what kinds of pressures this catalyst requires
andhow much of it is needed per mole of imine reduced.
[Edited on 3-12-2004 by Mendeleev]
Trogdor was a man. A dragon man. Or maybe just a dragon. . .
|
|
Organikum
resurrected
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2336
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
You find information on the microwave Leuckard on Rhodiums page, best you dl the .rar archive of Rhodiums page which mephisto uploaded to the ftp to
look for this.
There have been several posts on the HIVE regarding this, I will look if I have them on disk somewhere and post it.
Your patent is here
[Edited on 3-12-2004 by Organikum]
|
|
ballzofsteel
Harmless
Posts: 31
Registered: 13-3-2004
Member Is Offline
Mood: No Mood
|
|
Hi Org,
Cherry baby mentions a monomode microwave reactor in the post on Rhodiums.Did you modify your oven in any way?What Wattage used.?
|
|
Mendeleev
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 237
Registered: 25-12-2003
Location: USA
Member Is Offline
Mood: stoned
|
|
Crap, the CuO/CaSO4/BaSO4 catalyst requires 100 atm and 160 C, not very realistic.
|
|
Organikum
resurrected
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2336
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
Hi bally! ![;)](./images/smilies/wink.gif)
Read the original article and look at the amounts processed. The authors do some minimols in a 60W monomode micro.
Now you can easily see that interesting amounts are well to do in a 750W household-oven.
If the power is to much, some glassses with water scavenge a lot of MW-energy.
No monomode is needed, actually this monomode thingie is fairly overrated, mostly by those who dont know what it is.
|
|
antibond
Harmless
Posts: 9
Registered: 23-11-2004
Member Is Offline
Mood: good
|
|
micro?
what is a monomode micro?
|
|
Organikum
resurrected
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2336
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
A microwave operating in monomode instead of multimode as standard household microwave ovens do.
|
|
Mendeleev
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 237
Registered: 25-12-2003
Location: USA
Member Is Offline
Mood: stoned
|
|
I already have Rhodium's archive, but the only thing about leuckart that I found was a very general article, which said it was the reduction of
formamides or ammonium formate salts with a carbonyl compound. This seems very easy and versatile, given that formamide can have various groups
subsituted to the amine part. However no microwave, do you perchance recall the title of the article? Or maybe it was a thread?
Trogdor was a man. A dragon man. Or maybe just a dragon. . .
|
|
solo
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3973
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline
Mood: ....getting old and drowning in a sea of knowledge
|
|
Ref: Microwave chemistry
Here is something on the subject.....solo
http://home.ripway.com/2004-11/211899/amicrowaveofgooduseinc...
It's better to die on your feet, than live on your knees....Emiliano Zapata.
|
|
Mendeleev
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 237
Registered: 25-12-2003
Location: USA
Member Is Offline
Mood: stoned
|
|
Does the leuckart give better yield with formamide or ammonium formate?
Trogdor was a man. A dragon man. Or maybe just a dragon. . .
|
|
Organikum
resurrected
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2336
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
The standard Leuckard with formamide is haunted by the production of the dreaded "red tar". Ammonium formate seems to be better but yields
generally dont exceed 50%, there was a post of antoncho on the HIVE where yields of 95% were claimed, but nobody seemed to be able to reproduce this.
|
|
ballzofsteel
Harmless
Posts: 31
Registered: 13-3-2004
Member Is Offline
Mood: No Mood
|
|
formic %
I know I should know...but my memory fails me.
Is 70+-% formic acid, like the homemade stuff, useable in such a Leukart,
seeing as these hydroxyketones form stable imines and all?
This would be nice, as formic is hard for me to aquire.
If not (sorry to stray off topic btw)any tips on dehydrating 70%?
THis is practice not only theory yeah?
The Luekart on PAc I mean.
This would be fantastic!
Amination being the missing link and all...![:(](./images/smilies/sad.gif)
Cheers.
[Edited on 4-12-2004 by ballzofsteel]
|
|
Mendeleev
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 237
Registered: 25-12-2003
Location: USA
Member Is Offline
Mood: stoned
|
|
You don't actually use formic acid in the leuckard, you synthesize ammonium formate or formamide. Bubbling ammonia or mixing an amine with
formic acid should form the ammonium formate, after that, just boil away the water under vacuum or something. I believe 88% formic acid is obtained
by fractional distillation under vacuum, but I don't know the exact vacuum/temperature this should be done at, so does anyone here know?
Edit: Why does the red goo form?
Edit2: If I have a supplier of formic acid, is there any risk in ordering it? It's not scheduled as a precursor, but it was mentioned that it
is watched on Rhodium, so what do you risk by ordering it?
[Edited on 4-12-2004 by Mendeleev]
[Edited on 4-12-2004 by Mendeleev]
Trogdor was a man. A dragon man. Or maybe just a dragon. . .
|
|
ballzofsteel
Harmless
Posts: 31
Registered: 13-3-2004
Member Is Offline
Mood: No Mood
|
|
Thanks Mendeleev .The Leukart-Wallach then
|
|
Organikum
resurrected
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2336
Registered: 12-10-2002
Location: Europe
Member Is Offline
Mood: frustrated
|
|
The red tar is polymerisation products - the temperatures in the Leuckard are rather high.
Formic acid is watched.
Al/Hg under pressure with alcoholic ammonia gives decent yields on l-PAC. (ammonia in denat. alc. is ok)
|
|
Mendeleev
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 237
Registered: 25-12-2003
Location: USA
Member Is Offline
Mood: stoned
|
|
question about preparing the needed reagents
Can the ammonium formate or alkylammonium formate in a leuckart be prepared by simply adding store-bought 5% ammonia solution to acqueous formic acid,
then boiling off the water? Or does the reaction have to be dry? Also, is purity a huge concern with the leukart? How pure does the ketone have
to be?
[Edited on 5-12-2004 by Mendeleev]
Trogdor was a man. A dragon man. Or maybe just a dragon. . .
|
|
S.C. Wack
bibliomaster
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
From what I've read, no, it isn't that easy. Perhaps you could get the formate to precipitate with addition of acetone to conc. soln. But
IMHO the most practical way to make this (and the acetate) is by adding ammonium carbonate to the dry acid.
It isn't difficult to purify (methyl) ketones as you know, so might as well.
|
|
Mendeleev
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 237
Registered: 25-12-2003
Location: USA
Member Is Offline
Mood: stoned
|
|
Why won't the method using dilute acid and amine work? Is it because formic acid is not a srong enough acid? I know that mixing 5% ammonia with
HCl yields ammonium chloride on evaporating. This is the experimental procedure for the leuckart, given in a 1939 JACS article:
In a distilling flask fitted with a cork bearing a thermometer extending nearly to the bottom is placed 4 moles of alkylammonium formate prepared by
adding the proper amine to cold formic acid. The temperature is raised slowly to 180-190°C and this temperature maintained as long as water distils.
After cooling, 1 mole of ketone is added and the mixture heated until boiling begins; water, carbon dioxide, and amine distil and are collected in
concentrated hydrochloric acid. In case any ketone distils over, it is returned to the flask at intervals. The temperature of the boiling mixture is
190-230°C, which is maintained for four to eight hours, after which the mixture is cooled and diluted with 3-4 volumes of water, giving oily and
aqueous layers. The aqueous layer, mixed with the hydrochloric acid used in collecting the distilled amine, is concentrated to give the hydrochloride
of the excess of amine used. The oil is refluxed for several hours with 150-200mL of hydrochloric acid per mole of ketone taken, and after the
hydrolysis is complete water is added, the solution filtered through moist paper to separate resinified material and the filtrate, if not clear,
extracted once or twice with ether. In some experiments the amine hydrochloride crystallizes on cooling. The aqueous solution is made alkaline with
ammonia, extracted with ether, the ether solution dried with sodium sulfate and saturated with hydrogen chloride to give the amine hydrochloride. The
product is purified further by dissolving in absolute alcohol and precipitating with absolute ether.
It says the alkylammonium formate was prepared by adding the proper amine to cold formic acid, does that mean they had to use anhydrous formic acid
and anhydrous amine, or did they use something to catalyze the reaction?
Edit: Just found this posted in the preparation of cyanides thread by madscientist:
"PREPARATION OF AMMONIUM FORMATE ( [HCOO-][NH4+] )
Formic acid is added to an aqueous solution of ammonia ( [NH4+][OH-] ). The remaining solution is evaporated; the crystals left are ammonium formate
crystals. Crystals should weight about 64 grams if you have been achieving 100% yields. "
[Edited on 5-12-2004 by Mendeleev]
Trogdor was a man. A dragon man. Or maybe just a dragon. . .
|
|
solo
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3973
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline
Mood: ....getting old and drowning in a sea of knowledge
|
|
Ref: Water and reductive alkylation
I would say got to the hive and read bariums work on the use of water......I however found the 64 posts on the matter so read about it......solo
[Edited on 6-12-2004 by solo]
Attachment: a really wet redfuctive alkylation (barium).html (205kB) This file has been downloaded 1228 times
|
|
S.C. Wack
bibliomaster
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
If anyone has a chemistry book, encyclopedia, or journal that says that the normal ammonium formate or acetate can be crystallized by evaporation from
dilute ammonia solutions + acid, I'd love to see it.
Solutions of the formate or acetate lose significant amounts of ammonia in air. The more water to evaporate and/or the higher the temperature, the
more ammonia is lost. Some of the acid volatizes as well. So you get a solution of acid salt. Both the acid and normal salts are very soluble in
water.
Even when made from a more concentrated ammonia solution, the yield of normal formate crystallizing out of the acid formate sol'n is low. If you
try to make the acetate from vinegar and grocery store ammonia you may have a hard time getting anything to crystallize.
In industry, NH3 or ammonium carbonate is added to the concentrated sol'n of acid ammonium formate.
PS - AFAIK all journal preparations of the last 100 years use NH3 on the acid to produce a crystalline product. Before that, I doubt that anything
but an ammonium carbonate or NH3 was used.
[Edited on 6-12-2004 by S.C. Wack]
|
|
Mendeleev
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 237
Registered: 25-12-2003
Location: USA
Member Is Offline
Mood: stoned
|
|
Okay then, thanks, that helps a lot! To me formamide would be a better candidate, but could someone please tell me more about this red goo? What
conditions cause it and can it be avoided?. Aslo would this amination work with halogen derivatives of carbonyl compounds, such as chloroacetone?
And if it did work with chloroacetone, would it be possible to use that amino chloroacetone in a friedel crafts alkylation?
[Edited on 6-12-2004 by Mendeleev]
|
|
Pages:
1
2 |