Wolf-Aalude
Harmless
Posts: 2
Registered: 15-1-2014
Member Is Offline
Mood: No Mood
|
|
Nitration Toluene - Colorless crystals
Procedure;
To 100 mL of toluene was added 250 mL of (1:1 Sulfuric/Nitric acid) in 5 mL portions. The temperature was maintained below 40°C with ice bath, with
one 5-minute interval of 45°C.
The majority of the reaction was carried out between 15-25°C.
The layers were separated and the organic layer was stripped of remaining toluene under vacuum. The organic solution was then cooled to -20° C and
centrifuged. The solid was separated from the liquid.
The solid appeared as large crystalline spikes (>1cm in length) while the liquid was pale yellow.
Assumedly the solid is p-nitrotoluene, however all references say it is pale yellow.
The di-nitro products are also pale yellow as well as the tri-nitro compounds.
What is this?
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
Hi Wolf-Aalude,
I have an interest in making o, p-nitrotoluenes also so have been searching for a good procedure. On versuchschemie.de, the German hobby chemist
forum, Stefan posted a picture of purified p-nitrotlouene that he made. I repost it below:
Attachment: p-nitrotoluene (Stefan).doc (81kB)
This file has been downloaded 609 times
Does this look like your product?
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
Shown below is a picture of 6.7g of p-nitrotoluene that I synthesized yesterday. Its mp is 51-52°C in agreement with Wiki's 51.7°C. It is white
with a very pale yellow cast. I separated it from the mixed isomers by freezing to -16 °C. I caught the needle shaped crystals on a Buchner funnel,
washing them with a little heptane.
I will detail my preparation later after I finish my separation work on the mother liquor. This contains the o-nitrotoluene and the remaining
p-nitrotoluene.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
Here's another picture of p-nitrotoluene from versuchschemie.de by Ameisensulfat. Unfortunately it is unwashed. But his crystals do indeed appear to
be white without the yellow cast.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
