Nicodem
Super Moderator
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
Volunteer project: Org. chem. index of amateur syntheses
In order to promote organic synthesis on the forum, I thought to create a sticky thread with an index of suggestions for synthesis practice for those
interested. During the years here I noticed only few questions of the "what can I do with compound X", but I believe this ought to be a more common
question. I don't have the time to do all the work and therefore I call for collaboration. I need volunteers to post information to add. The response
will also be indicative of how much interest there is for such a project.
The idea is to make an index of syntheses that can be done by using simple to acquire compounds (the so called OTC products). The first thing where
help is needed is the information on which such compounds are, and where they are available. The second thing is to gather suggestions on what can be
done from these compounds in one synthetic step or at least a one-pot step. Thirdly, a short review with references to procedures needs to be added to
each suggested synthesis (no more than a few sentences: short reaction description, complexity, cautions, unreferenced suggested further use in
synthesis...). Preference should be given to references to this or other amateur chemical forums (Versuchschemie, Hyperlab, etc.), Organic synthesis,
Vogel's and other practical org. chemistry manuals, Synthetic Pages, reliable primary literature, open access journals, and such. Obviously, I'm open
also to ideas about other types of organisational structures.
Volunteers can post replies with such short reviews on any individual synthesis and these will be later included in the index.
If this becomes a successful project we could do something similar for inorganic syntheses, isolation of compounds from biological materials,
educational chemical demonstrations, analytical methods, etc.
Below is a draft, with a few short reviews for syntheses starting with acetone set as examples. Some links are added in order to aid the volunteers.
(Formatting and alphabetical order will be done last.)
*************************************************************************************
<a href="#aceticacid">acetic acid</a>
<a href="#acetone">acetone</a>
<a href="#acetoneazine">acetone azine</a> (N2H4.H2O)
<a href="#acetonecyanohydrin">acetone cyanohydrin</a> (NaCN, H2SO4)
<a href="#acetoxime">acetoxime</a> (NaNO2, NaHSO3)
<a href="#acetylacetone">acetylacetone</a> (Ac2O, AlCl3)
<a href="#cianopropilhydraz">2,2'-hydrazine-1,2-diylbis(2-methylpropanenitrile)</a> (N2H4.H2SO4, NaCN)
<a href="#mesitylene">mesitylene</a> (H2SO4)
<a href="#acetonetms">acetone trimethylsilyl enol ether</a> (TMSCl, NaI, Et3N, MeCN)
<a href="#chelidonicacid">chelidonic acid</a> (diethyl oxalate, NaOEt, EtOH, HCl)
<a href="#chloroacetone">chloroacetone</a> (TCCA, H2SO4)
<a href="#chloroform">chloroform</a> (NaOCl, NaOH)
<a href="#bromoform">bromoform</a> (Br2, NaOH)
<a href="#iodoform">iodoform</a> (I2, NaOH)
<a href="#bromoacetone">bromoacetone</a> (Br2, AcOH)
<a href="#aminobutanone">4-diethylamino-2-butanone</a> (Et2NH, CH2O, MeOH, HCl)
<a href="#isopropylidenemalonate">diethyl isopropylidenemalonate</a> (diethyl malonate, ZnCl2, Ac2O)
<a href="#ketene">ketene</a> (thermolysis)
<a href="#pinacol">pinacol hydrate</a> (Mg, HgCl2 or I2)
<a href="#phorone">phorone</a>
<a href="#diacetone">diacetone alcohol</a> (Ba(OH)2 or Ca(OH)2)
<a href="#mesityl">mesityl oxide</a> (HCl)
<a href="#acetonephenylhydrazone">acetone phenylhydrazone</a> (PhNHNH2)
<a href="#triacetoneamine">triacetone amine</a> (NH3)
<a href="#triacetylbenzene">1,3,5-triacetylbenzene</a> (HCOOEt, NaOEt, Et2O, AcOH)
acetonitrile
acetic acid
acetamide
N-t-butyl-acetamide
<a href="#aspirin">aspirin (acetyl salicylic acid)</a>
<a href="#cuasa">copper(II) aspirinate</a>
<a href="#sa">salicylic acid</a> (H2O)
<a href="#mesa">methyl salicylate</a> (MeOH, H2SO4)
anethole
anethole trithione
anethole oxide
anethole pseudonitrosite
anisic acid
anisaldehyde
dibromoanethole
tribromoanethole
p-methoxyphenylacetone
benzaldehyde
benzoic acid (sodium salt)
2-butanone (MEK)
propanoic acid
3-(hydroxyimino)butan-2-one
camphor
carbon
carbon dioxide
cinnamaldehyde
cinnamic acid
cinnamyl alcohol
propenylbenzene (N2H4, KOH)
citric acid
cyanuric acid
N,N',N"-trimethylisocyanuric acid
N,N',N"-tris(hydroxymethyl)isocyanuric acid
cellulose
cellulose acetate
nitrocellulose
dichloromethane
diodomethane (NaI, Me2CO)
<a href="#ethanol">ethanol</a>
acetic acid
acetaldehyde
<a href="#et2o">diethyl ether</a> (H2SO4)
<a href="#etbr">ethyl bromide</a>
<a href="#etoso3h">ethyl sulfuric acid (and its salts)</a> (NaHSO4)
sodium ethoxide (NaOH)
ethyl acetate
ethylene glycol
eugenol
isoeugenol
O-acetyl eugenol
O-benzylisoeugenol
O-methyleugenol
5-formyleugenol
p-dichlorobenzene
dimethylsulfoxide
<a href="#me3sbr">trimethylsulfonium bromide</a> (Br2, Me2CO)
trimethylsulfoxonium iodide
glucose
glycerol
glyoxal
L-glutamic acid (monosodium salt)
hexamine
methylamine hydrochloride
dimethylamine hydrochloride
hydroquinone
p-benzoquinone
p-dimethoxybenzene
p-methoxyphenol
ibuprofen
formaldehyde
formic acid
formamide (NH3)
ethyl formate
methyl formate
limonene
mannitol
methanol
<a href="#mtbe">methyl t-butyl ether</a>
<a href="#tbuoh">t-butyl alcohol</a>
<a href="#tbucl">t-butyl chloride</a>
isobutene
N-methylpyrrolidin-2-one (NMP)
N-methyl-gamma-aminobutyric acid
naphthalene
1-chloromethylnaphthalene
1-bromonaphthalene
1-nitronaphthalene
naphthalene-2-sulfonic acid
naproxen
nicotinamide
nicotinic acid
nitromethane
2-nitroethanol
hydroxylamine hydrochloride
xylenes
oxalic acid
paraformaldehyde
<a href="#paracetamol">paracetamol (p-hydroxyacetanilide)</a>
<a href="#aminophenol">p-aminophenol</a>
<a href="#benzoquinone">p-benzoquinone</a>
<a href="#meoacetanilide">p-methoxyacetanilide</a>
<a href="#ohno2acetanilide">4-hydroxy-2-nitroacetanilide</a>
alpha-pinene
beta-pinene
2-propanol
isopropyl bromide
isopropyl iodide
propene
propylene glycol
polyethylene terephthalate
<a href="#salicylic">salicylic acid</a>
<a href="#aurintricarboxylic">aurin tricarboxylic acid (ammonium salt)</a> (H2SO4,
NaNO2, HCHO, NH3)
<a href="#methylenesalicylic">3,3'-Dicarboxy-4,4'-dihydroxydiphenylmethane</a> (HCHO, HCl)
<a href="#nitrosalicylic">5-nitrosalicylic acid</a> (HNO3, AcOH)
<a href="#dibromosalicylic">3,5-dibromosalicylic acid</a> (Br2, AcOH)
<a href="#tribromophenol">2,4,6-tribromophenol</a> (Br2)
<a href="#parabenic">p-hydroxybenzoic acid</a> (K2CO3)
5-sulfosalicylic acid https://www.sciencemadness.org/whisper/viewthread.php?tid=24...
3- and 5-formylsalicylic acid (hexamine, AcOH, H2SO4)
<a href="#phenol">phenol</a>
picric acid
<a href="#salicylamide">salicylamide</a> (urea, H3PO4)
sodium benzoate
sucrose
starch
<a href="#styrene">styrene</a>
<a href="#tartaric">tartaric acid</a>
diethyl tartrate
dibutyl tartrate
<a href="#pyruvic">pyruvic acid</a> (KHSO4)
tetrachloroethene
tetrahydrofuran
1,4-dibromobutane (HBr)
4-chlorobutyl acetate (AcCl, ZnCl2)
toluene
trichloroisocyanuric acid
trichloroethene
thiourea
urea
vanillin
---------------------------------------------------------------------------------
<h1><a id="acetone" href="#acetone"></a>Acetone</h1>
A common solvent that can easily be aquired in hardware shops. Its main modes of reactivity are the nucleophilic additions to its double bond, the
reaction of electrophiles with the acetone derived enolate, and electrophilic addition on the double bond of the enol tautomer.
<h2><a id="acetoneazine" href="#acetoneazine"></a>Acetone azine</h2>
The double condensation of acetone to hydrazine hydrate gives acetone azine.1 Hydrazine hydrate is toxic and carcinogenic and must be used
only in a fume hood and treated with caution.
1. Org. Synth. http://www.orgsyn.org/demo.aspx?prep=cv6p0010
<h2><a id="acetonecyanohydrin" href="#acetonecyanohydrin"></a>Acetone cyanohydrin </h2>
The nucleophilic addition of HCN to acetone gives acetone cyanohydrin.1 CAUTION: This synthesis requires a fume hood and is extremely
hazardous with the reagents and the product being highly toxic.
1. Org. Synth. http://www.orgsyn.org/demo.aspx?prep=cv2p0007
<h2><a id="acetoxime" href="#acetoxime"></a>Acetoxime </h2>
Acetoxime can be prepared either directly by the condensation of acetone with hydroxylamine1 or indirectly by the reaction with the HON(SO3Na)2 salt
prepared in situ from NaNO2 and NaHSO3.2
1.
2. Org. Synth. http://www.orgsyn.org/demo.aspx?prep=cv1p0318
<h2><a id="acetylacetone" href="#acetylacetone"></a>Acetylacetone</h2>
C-Acylation of acetone gives acetylacetone. This is generally Lewis acid catalysed (BF3, AlCl3, etc.) and uses acetic anhydride.1
Acetylacetone is an excellent starting material for the synthesis of certain heterocycles (3,5-dimethylpyrrazole, 3,5-dimethylisoxazole, pyrimidines),
can be oxidized to tetraacetylethane or be C-alkylated or C-arylated to numerous products.
1. http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv3...
<h2><a id="acetonephenylhydrazone" href="#acetonephenylhydrazone"></a>Acetone phenylhydrazone</h2>
This hydrazone is an intermediate in the synthesis of 2-methylindole by the Fischer indole synthesis.1
1. Fischer, Ann., 236, 116 (1886); Ber., 19, 1563 (1886); Marion and Oldfield, Can. J. Research, 25B, 1 (1947).
<h2><a id="cianopropilhydraz " href="#cianopropilhydraz "></a>2,2'-Hydrazine-1,2-diylbis(2-methylpropanenitrile) </h2>
https://www.sciencemadness.org/whisper/viewthread.php?tid=10...
<h2><a id="chloroform" href="#chloroform"></a>Chloroform</h2>
<h2><a id="bromoform" href="#bromoform"></a>Bromoform</h2>
<h2><a id="iodoform" href="#iodoform"></a>Iodoform</h2>
<h2><a id="mesitylene" href="#mesitylene"></a>Mesitylene </h2>
Mesitylene is the product of the acid catalyzed triple selfcondensation of acetone.1 This reaction is an interesting demonstration of building up an
aromatic system from a nonaromatic compound. Mesitylene can be further functionalized by electrophilic aromatic substitutions or it can be oxidized to
trimesic acid.
1. http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv1...
<h2><a id="acetonetms" href="#acetonetms"></a>Acetone trimethylsilyl enol ether </h2>
The O-silylation of acetone with Me3SiCl gives acetone trimethylsilyl enol ether,[1] a useful acetone synthone that can be C-functionalized
with some electrophilic reagents.
1. http://www.orgsyn.org/demo.aspx?prep=cv8p0001
<h2><a id="chelidonicacid" href="#chelidonicacid"></a>Chelidonic acid </h2>
The double condensation of diethyl oxalate with acetone and the consequent cyclisation gives chelidonic acid.1 This is an interesting
example of heterocyclic cyclocondensation chemistry, yielding a substituted 4-pyranone.
1. http://www.orgsyn.org/demo.aspx?prep=cv2p0126
<h2><a id="chloroacetone" href="#chloroacetone"></a>Chloroacetone</h2>
Electrophilic monochlorination of acetone yields chloroacetone. Chlorine or other electrophilic chlorinating reagents can be used. Of these, the most
practical is trichloroisocyanuric acid where a tiny amount of H2SO4 is used for acidic catalysis.[1] This synthesis is very exothermic. For this
reason it should never be upscaled or modified in any way (particularly the amount of the H2SO4 should never be increased – dangerous runaways have
been reported due to thoughtless modifications!). CAUTION: Chloroacetone is a very potent lachrymator and is potentially genotoxic. Its synthesis and
distillation should only be carried in a fume hood and all the used equipment quenched with ammonia.
1. Patent application FR2633614
<h2><a id="bromoacetone" href="#bromoacetone"></a>Bromoacetone</h2>
Bromoacetone can be prepared, analogously to chloroacetone, by the electrophilic bromination of acetone. Bromination with elemental bromine in acetic
acid can be applied.1 CAUTION: Bromoacetone is a very potent lachrymator and is potentially genotoxic. Its synthesis and distillation
should only be carried in a fume hood and all the used equipment quenched with ammonia.
[1] http://www.orgsyn.org/demo.aspx?prep=cv2p0088
<h2><a id="aminobutanone" href="#aminobutanone"></a>4-Diethylamino-2-butanone </h2>
Acetone can be a substrate for the Manich condensations. One such is the reaction with diethylamine and formaldehyde,1 but other secondary
amines can also be used to give the corresponding 4-dialkylamino-2-butanones.
1. http://www.orgsyn.org/demo.aspx?prep=cv4p0281
<h2><a id="isopropylidenemalonate" href="#isopropylidenemalonate"></a>Diethyl isopropylidenemalonate</h2>
Acetone can undergo Knoevenagel condensations with some reagents containing a reactive methylene group. One such example is the condensation of
acetone with diethyl malonate.[1]
1. http://www.orgsyn.org/demo.aspx?prep=cv6p0442
<h2><a id="#ketene" href="#ketene"></a>Ketene</h2>
Thermolysis of acetone gives ketene and methane.[1] CAUTION: Ketene is very toxic and reactive. It should be quenched, dimerized or consumed in a
reaction immediately after formation. Its handling requires proper equipment and should only be done by very experienced chemists.
1. http://www.orgsyn.org/demo.aspx?prep=cv1p0330
<h2><a id="pinacol" href="#pinacol"></a>Pinacol hydrate</h2>
Reduction of acetone with activated magnesium in anhydrous media gives pinacol (pinacol coupling).[1]
1. http://www.orgsyn.org/demo.aspx?prep=cv1p0459
<h2><a id="phorone" href="#phorone"></a>Phorone</h2>
<h2><a id="diacetone" href="#diacetone"></a>Diacetone alcohol</h2>
1. http://www.orgsyn.org/demo.aspx?prep=CV1P0199
<h2><a id="mesityl" href="#mesityl"></a>Mesityl oxide</h2>
1. ref 1 in http://www.orgsyn.org/demo.aspx?prep=cv1p0345
<h2><a id="triacetoneamine" href="#triacetoneamine"></a>Triacetone amine</h2>
https://www.sciencemadness.org/whisper/viewthread.php?tid=26...
<h2><a id="triacetylbenzene" href="#triacetylbenzene"></a>1,3,5-Triacetylbenzene</h2>
1. http://www.orgsyn.org/demo.aspx?prep=cv3p0829
<h1><a id="aspirin" href="#aspirin"></a>Aspirin (acetyl salicylic acid)</h1>
Aspirin or acetyl salicylic acid is an active pharmaceutical ingredient that is inexpensive and sold in large dosage forms (e.g., 0.5 g tablets,
commonly with only very small amounts of binders and other excipients, if at all).
<h2><a id="cuasa" href="#cuasa"></a>Copper(II) aspirinate</h2>
Aspirin forms a carboxylate complex with Cu(II).1
1. SM: Copper(II) Aspirinate Synthesis
<h2><a id="sa" href="#sa"></a>Salicylic acid</h2>
<h2><a id="mesa" href="#mesa"></a>Methyl salicylate</h2>
<h1><a id="dmso" href="#dmso"></a>Dimethyl sulfoxide (DMSO)</h1>
DMSO is a common polar aprotic solvent that is sometimes easily available to the public.
<h2><a id="me3sbr" href="#me3sbr"></a>Trimethylsulfonium bromide</h2>
The reaction of bromine with dimethylsulfoxide (DMSO) first starts with the rapid and highly exothermic S-bromination, but the initial
product goes trough a complex series of much slower decompositions and further reactions, until at the end the major product is the trimethylsulfonium
bromide. This can easily be isolated by precipitation with acetone and filtration. The product can be used as an electrophilic methylation reagent.
CAUTION: Bromine is very hazardous, volatile and corrosive liquid. Its reaction with DMSO is very violent. Dangerous splattering can occur!
1. SM: Trimethylsulfonium bromide and its use for the methylation of phenols
<h1><a id="mtbe" href="#mtbe"></a>Methyl t-butyl ether (MTBE)</h1>
<h2><a id="tbuoh" href="#tbuoh"></a>tert-Butyl alcohol</h2>
MTBE can be cleaved directly to a mixture of methanol, tert-butyl alcohol and isobutene by dilute aq. non-nucleophilic acid catalysis (e.g.,
H2SO4, NaHSO4, etc.).1
1.
<h2><a id="tbucl" href="#tbucl"></a>tert-Butyl chloride</h2>
The SN1 substitution at MTBE with concentrated aqueous HCl easily gives tert-butyl chloride by the cleavage of
methanol.1 The crude product can be isolated by phase separation.
1. SM: tert-Butyl Alcohol
<h1><a id="ethanol" href="#ethanol"></a>Ethanol</h1>
Ethanol is a common solvent that can be acquired in hardware shops or pharmacies. It can also be isolated by distillation from brandy or other
alcoholic beverages.
<h2><a id="etbr" href="#etbr"></a>Ethyl bromide</h2>
Ethyl bromide is most easily prepared by its reaction with hydrobromic acid. The product is distilled from the reaction mixture.1 Instead
of the 48% hydrobromic acid, it is also possible to use suitable bromide salts (NaBr, KBr, NH4Br, etc.) in combination with sulfuric
acid.2
1. Org. Synth. 1921, 1, 3.
2. SM: Ethyl/Isopropyl Bromide preparation
<h2><a id="et2o" href="#et2o"></a>Diethyl ether</h2>
Ethanol can be self-condensed to diethyl ether. The reaction is generally catalysed by sulfuric acid and needs to be conducted at about 140 °C in
order for diethyl ether to be the main product.
1. SM: Diethyl Ether - Illustrated Practical Guide
<h2><a id="etoso3h" href="#etoso3h"></a>Ethyl sulfuric acid (and its salts)</h2>
The esterification of ethanol with sulfuric acid gives ethyl sulfuric acid (EtOSO3H). Different methods exist for the esterification.
Already the reaction of sulfuric acid with anhydrous ethanol gives a moderate yield of ethyl sulfuric acid. Formation of the soluble calcium or barium
salt is necessary in order to remove the residual sulfuric acid as the insoluble sulfates.1 The calcium or barium salts can then be
transformed to soluble sodium or potassium ethyl sulfates by ion metathesis employing Na2CO3 or K2CO3. The
complete esterification is possible by either employing anhydrous NaHSO4,2 or sulfuric acid with anhydrous
Na2SO4.3
1. SM: Nitroethane from ethylsulfate, Desseigne variation.
2. Patent application US3024263
3. SM: Sodium Ethyl Sulfate
<h1><a id="salicylic" href="#salicylic"></a>Salicylic acid</h1>
Salicylic acid is often available through various sources, including internet auction sites. Alternatively, it is very easily prepared by the facile
hydrolysis of aspirin.1
1. SM: Preparation of Phenol from Salicylic Acid
<h2><a id="aurintricarboxylic" href="#aurintricarboxylic"></a>Aurin tricarboxylic acid (ammonium salt)</h2>
The acid catalysed oxidative triple condensation of salicylic acid with formaldehyde gives aurin tricarboxylic acid.1 This compound has a variety of
biological activities.2 Its ammonium salt is a reagent for the colorimetric estimation of aluminum.3
1. http://www.orgsyn.org/demo.aspx?prep=CV1P0054
2.
3. J. Am. Chem. Soc., 1925, 47, 142–143. DOI: 10.1021/ja01678a019
<h2><a id="methylenesalicylic" href="#methylenesalicylic"></a>3,3'-Dicarboxy-4,4'-dihydroxydiphenylmethane</h2>
<h2><a id="parabenic" href="#parabenic"></a>para-Hydroxybenzoic acid</h2>
The reversibility of the Kolbe-Schmitt reaction can be used to rearrange salicylic acid to the thermodinamically more stable p-hydroxybenzoic
acid. This is achieved by heating the potassium salt of salicylic acid at 240 °C.1 The salt is prepared using K2CO3
and after the reaction the product is liberated from its double potassium salt with HCl(aq). One half of the salicylic acid is decarboxylated to
phenol, which distils out of the reaction mixture and should be recovered with a condenser. As such, the reaction can be used to prepare two products,
p-hydroxybenzoic acid and phenol, with good yields. The p-hydroxybenzoic acid can be used to prepare alkyl parabens. It can also
serve as a substrate for various electrophilic aromatic substitutions. CAUTION: Phenol is moderately toxic and its fumes should be either condensed or
the reaction conducted in a fume hood.
1. Organic Syntheses, 1934, 14, 48.
<h2><a id="dibromosalicylic" href="#dibromosalicylic"></a>3,5-Dibromosalicylic acid</h2>
The dibromination of salicylic acid quite selectively gives the 3,5-dibromosalicylic acid. This can be achieved with near quantitative yields by
various bromination methods. The most elementary is the reaction with bromine in acetic acid.1
1. Russian Journal of General Chemistry, 2004, 74, 738-743. DOI: 10.1023/B:RUGC.0000039088.87053.eb
<h2><a id="tribromophenol" href="#tribromophenol"></a>2,4,6-Tribromophenol</h2>
The electrophilic tribromination of salicylic acid with bromine is accompanied by decarboxylation and gives 2,4,6-tribromophenol in nearly
quantitative yields.1 CAUTION: Halophenols in general are toxic and have an unpleasant and difficult to remove stench.
1. J. Am. Chem. Soc., 1924, 46, 2498–2505. DOI: 10.1021/ja01676a020
<h2><a id="nitrosalicylic" href="#nitrosalicylic"></a>5-Nitrosalicylic acid</h2>
Electrophilic mononitration of salicylic acid under relatively mild conditions gives predominantly the 5-nitro isomer. Various procedures can be found
in the literature, of which the nitration with 65% HNO3(aq) in acetic acid as the solvent appears the most straightforward.1 The nitration
is also possible with a nitric and sulfuric acid mixture.2 Yields are commonly moderate, often due to the unselectivity and consequent
recrystallization losses. 5-Nitrosalicylic acid can be reduced to 5-aminosalicylic acid. The regioisomeric 3-nitrosalicylic acid can be prepared by
employing a more ortho-selective reagent.3
1. J. Chem. Soc., 1946, 965-967. DOI: 10.1039/JR9460000965; see also Org. Process Res. Dev., 2008, 12, 995–1000. DOI: 10.1021/op800112u
2. J. Prakt. Chem., 1890, 42, 550–553. DOI: 10.1002/prac.18900420150
3. Synth. Commun., 2010, 40, 3353-3357. DOI: 10.1080/00397910903419852; Patent application GB2377934.
<h2><a id="phenol" href="#phenol"></a>Phenol</h2>
Thermal decarboxylation of salicylic acid at about 180 °C gives phenol in moderate to good yields.1 Bases, such as
K2CO3 or Ca(OH)2, catalyse the decarboxylation via the retro-Kolbe-Schmitt reaction mechanism so that the
reaction can proceed with better efficiency even at the lower temperatures (~140 °C).2
1. SM: Preparation of Phenol from Salicylic Acid
2. Patent application US2488472; see also <a href="#parabenic">para-Hydroxybenzoic acid</a>
<h2><a id="salicylamide" href="#salicylamide"></a>Salicylamide</h2>
Salicylamide, the primary amide of salicylic acid, is commonly prepared by two chemical steps, the first being the carboxylic acid "activation" (for
example, as the acyl chloride or methyl ester) and then the reaction with ammonia. However, a procedure for a direct amidation with urea
exists.1 Salicylic acid is heated at 170-180 °C with urea in the presence of catalytic amounts of H3PO4 to give
salicylamide.
1. Patent application DE869639.
<h1><a id="styrene" href="#styrene"></a>Styrene</h1>
<h2><a id="styreneoxide" href="#styreneoxide"></a>Styrene oxide</h2>
There are hundreeds of literature examples of styrene epoxidation in the literature, but few use easily accessible reagents. Of these, the epoxidation
with Oxone, hydrogen peroxide with a catalyst, sodium percarbonate or perborate might be most suitable for an amateur.1 Another option is
the epoxidation through the chlorohydrine (with hypochlorites or N-chloroimides). One of these methods is the epoxidation with trichloroisocyanuric
acid in an aqueous acetone.2
1.
2. SM: Styrene oxide with TCCA
<h2><a id="styrenecloh" href="#styrenecloh"></a>Styrene chlorohydrin</h2>
Styrene chlorohydrin or 2-chloro-1-hydroxyethyl)benzene can easily be prepared by cochlorination of styrene with trichloroisocyanuric acid in aqueous
acetone.1 The treatment of styrene chlorohydrine with bases gives styrene oxide.2 Its benzylic oxidation gives phenacyl
chloride.3
1. Synthesis, 2003, 45-48. DOI: 10.1055/s-2003-36250
2. SM: Styrene oxide with TCCA
3.
<h1><a id="paracetamol" href="#paracetamol"></a>Paracetamol (p-hydroxyacetanilide)</h1>
Paracetamol or acetaminophen is a active pharmaceutical ingredient that is inexpensive and sold in large dosage forms (e.g., 0.5 g tablets, commonly
with only very small amounts of binders and other excipients, if at all). Most excipients can be removed by dissolving tablets in acetone, filtering
the insolubles and evaporating the filtrate.1 Crude paracetamol can be recrystallized from water or aqueous acetone to remove any water
insoluble excipients and improve purity. Its main modes of reactivity are the reactions with electrophiles (it is nucleophilic at all aromatic
positions as well as at O and N), it can readily be oxidized, and the reactions at the anilide carbonyl group (e.g., hydrolysis).
1. Paracetamol - a curriculum resource
<h2><a id="aminophenol" href="#aminophenol"></a>para-Aminophenol</h2>
Acidic hydrolysis of paracetamol can be used to prepare para-aminophenol.1
1.
<h2><a id="benzoquinone" href="#benzoquinone"></a>para-Benzoquinone</h2>
Oxidation of paracetamol under hydrolytic conditions gives para-benzoquinone.1 CAUTION: para-Benzoquinone is toxic,
readily sublimates and tends to stain everything.
1.
<h2><a id="meoacetanilide" href="#meoacetanilide"></a>para-Methoxyacetanilide</h2>
Paracetamol can be easily O-methylated when deprotonated. The methylation is highly selective for the phenolic group. Methylation is achieved
with several common methylating reagents, mainly dimethyl sulfate or methyl iodide.1 Nevertheless, methylations with trimethyl
phosphate2 and methyl nitrate3 have also been described. The product can be hydrolysed to p-anisidine or used for
several other derivatizations (N-alkylations, electrophilic aromatic substitutions, etc.)
1. SM: Paracetamol --> 2,5-dimethoxyallylbenzene
2. SM: Attempted Methylation of Paracetamol with TMP
3. SM: Methylation of phenols with Methyl Nitrate
<h2><a id="ohno2acetanilide" href="#ohno2acetanilide"></a>4-Hydroxy-2-nitroacetanilide</h2>
https://www.sciencemadness.org/whisper/viewthread.php?tid=97...
<h1><a id="tartaric" href="#tartaric"></a>Tartaric acid</h1>
<h2><a id="pyruvic" href="#pyruvic"></a>Pyruvic acid</h2>
When the tartaric acid (any stereoisomer) is heated in the presence of an acid catalyst, water eliminates to give the unstable 2-oxo-succinic acid
which immediatelly decarboxylates under the reaction conditions. The formed pyruvic acid needs to be distilled as it forms to prevent its
decomposition. Thus heating an intimate mixture of tartaric acid and potassium hydrogen sulfate at 210-220 °C is an effective method for the
synthesis of pyruvic acid.1
1. Furniss, Hannaford, Smith, Tatchell: Vogel's Practical Organic Chemistry 5ed, 1989, pp 740.
<!-- bfesser_edit_tag -->[<a href="u2u.php?action=send&username=bfesser">bfesser</a>: tweaked
<em>Org. Syn.</em> links]
[Edited on 3.11.13 by bfesser]
[Edited on 22/12/2013 by Nicodem]
…there is a human touch of the cultist “believer” in every theorist that he must struggle against as being
unworthy of the scientist. Some of the greatest men of science have publicly repudiated a theory which earlier they hotly defended. In this lies their
scientific temper, not in the scientific defense of the theory. - Weston La Barre (Ghost Dance, 1972)
Read the The ScienceMadness Guidelines!
|
|
|
deltaH
Dangerous source of unreferenced speculation
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
This is a lovely idea and excellent work, well done!
|
|
|
Random
International Hazard
Posts: 1120
Registered: 7-5-2010
Location: In ur closet
Member Is Offline
Mood: Energetic
|
|
I love the idea, one suggestion for organization: first should be chemicals that are available otc to everyone and then chems that can be made one
step from that, then what can be made from that etc..
For example
Benzoic acid first chem otc
Benzamide one step from urea
Aniline from benzamide
I hope you understand because I dunno how to explain.
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
Do you realize how complicated that would get? It's impractical.
|
|
|
Dariusrussell
Hazard to Self
Posts: 70
Registered: 27-6-2013
Location: Southie
Member Is Offline
Mood: Organometallics
|
|
For some reason when I click on any of the orgsyn links they show up blank. But other than that this is an incredibly useful source.
|
|
|
gsd
National Hazard
Posts: 847
Registered: 18-8-2005
Member Is Offline
Mood: No Mood
|
|
@Dariusrussell
It seems orgsyn.org have changed the way their site can be accessed. looks like you must first go thru' the warnings & disclaimer page before you
are shown any preparations.
So first go to www.orgsyn.org
then click on "search text"
copy-paste "Diacetone alcohol" or any of the compound name who's preparation you are searching
Select "title" and then GO.
You will then be directed to warnings & disclaimers. Once you accept that then the prep is displayed.
gsd
|
|
|
Dariusrussell
Hazard to Self
Posts: 70
Registered: 27-6-2013
Location: Southie
Member Is Offline
Mood: Organometallics
|
|
Yeah thats what I ended up doing. Just thought I'd let Nicodem know the links are sort-of broken.
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
I edited the post and tweaked all the <em>Org. Syn.</em> links; they should all work fine now. I hope this helps. 
<strong>Nicodem</strong>, I hope you don't mind that I edited your post—just say the word and I'll keep my hands off. I'd also
like to volunteer my time and skills in coding. With my help, maybe you could be freed up to focus on the organization and collection of
topics/links, and I can take care of keeping the code un-broken. I love tedious jobs.
Finally, I just want to say that I really like this project so far. I think I can safely speak for us all when I say that we appreciate everything
you do. Maybe some day <em>elements</em> from my topical compendium could be integrated into your index—or even the compendium
in its entirety.
[Edited on 3.11.13 by bfesser]
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
Aah, so that's why I couldn't open them!
great idea Nicodem!
all above information is intellectual property of Pyro.  |
|
|
Nicodem
Super Moderator
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
Any non-moderator volunteers at all?
We need at least three volunteers, or else this will end up as just another dead end. Don't expect me to invest any work into this, except for
compiling the text into a whole.
Quote: Originally posted by bfesser  | | I edited the post and tweaked all the <em>Org. Syn.</em> links; they should all work fine now. I hope this helps. |
Thanks, but the references are not formated yet, so you pretty much overworked it. The URL addresses will have to be incorporated to the references
anyway.
| Quote: | | <strong>Nicodem</strong>, I hope you don't mind that I edited your post—just say the word and I'll keep my hands off. I'd also
like to volunteer my time and skills in coding. With my help, maybe you could be freed up to focus on the organization and collection of
topics/links, and I can take care of keeping the code un-broken. I love tedious jobs. |
I'm more than happy to leave all the compiling and editing work to you. There is only this slight problem, that without any volunteer there will be
nothing to edit at all.
| Quote: Originally posted by Random | I love the idea, one suggestion for organization: first should be chemicals that are available otc to everyone and then chems that can be made one
step from that, then what can be made from that etc..
For example
Benzoic acid first chem otc
Benzamide one step from urea
Aniline from benzamide
I hope you understand because I dunno how to explain. |
There are several reasons on why I think your suggestion is unreasonable. Here are a few:
- It would take at least 10 times more work and there is currently no will even for the proposed amount of work;
- Anyone who is interested in doing a multi-step synthesis is more than likely competent enough to do his own literature work and has no need of such
an index;
- Any additional step requires additional reagents, which is in conflict to the core idea of the index of readily accessible experiments (OTC
substrate with common lab. reagents);
- You suggest others to do many times more work, but don't volunteer to participate (bad taste).
…there is a human touch of the cultist “believer” in every theorist that he must struggle against as being
unworthy of the scientist. Some of the greatest men of science have publicly repudiated a theory which earlier they hotly defended. In this lies their
scientific temper, not in the scientific defense of the theory. - Weston La Barre (Ghost Dance, 1972)
Read the The ScienceMadness Guidelines!
|
|
|
kmno4
International Hazard
Posts: 1503
Registered: 1-6-2005
Location: Silly, stupid country
Member Is Offline
Mood: No Mood
|
|
| Quote: | | Anyone who is interested in doing a multi-step synthesis is more than likely competent enough to do his own literature work and has no need of such an
index |
That is why I do not understand your idea.
Such an index would be (maybe) useful if created ~10 years ago.
| Quote: | | In order to promote organic synthesis on the forum, I thought to create a sticky thread with an index of suggestions for synthesis practice for those
interested. |
Promote, but to whom ?
To users attempting to "extract any chemicals from household things" or "make meth from dog's shit" or "extract methanol from gasoline" etc. ? No
To users "interested" or "advanced" ? See the first quotation.
Besides, there is very important "OTC substrate with common lab. reagents". Are TMSCl,PhNHNH2,Et3N,MeCN,NaCN,Ac2O,AlCl3... readily available ? For the
most users - they are not.
For a longer time, SM promotes only vacuity, idle posts about nothing. Examples from this topic only :
"This is a lovely idea
I love the idea ... I hope you understand because I dunno how to explain.
Do you realize how complicated that would get? It's impractical.
For some reason when I click on any of the orgsyn links they show up blank
I hope you don't mind that I edited your post
Aah, so that's why I couldn't open them!great idea"
.....
Слава Україні !
Героям слава !
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
<strong>kmno4</strong>, if you don't have any constructive criticism, don't post. If you believe that "SM promotes only vacuity, idle
posts about nothing," then you're more than welcome to leave. Don't waste our time with your negativity and hypocrisy (your post is as vacuous or
more so than any other in this topic).
tl;dr: Contribute something positive or shut the fuck up.
|
|
|
Nicodem
Super Moderator
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by kmno4 | That is why I do not understand your idea.
Such an index would be (maybe) useful if created ~10 years ago. |
Yes, it is true that today, unlike 10 years ago, one can access almost any scientific literature (assuming no inhibition toward breaking the copyright
law). In my days I had to go physically to the library and spend hours with the Chemical Abstracts to find any references. Now they are just a few
clicks away. Perhaps for this reason, it is difficult for the new generations to appreciate the work invested into finding the right articles. The
more accessible science becomes, the more the potentially interested members become lazy and unable to do any literature work by themselves.
The premise of this index is that among these lazy members there are a few who would actually do some work if stimulated and steered in the right
direction. Hence the idea of promoting experimental work by listing experimental proposals and making synthesis references more accessible. Perhaps it
is naive, and the (lack of) any proper response to this thread apparently confirms this is so, but in my naivety I found it worth trying.
| Quote: | | Besides, there is very important "OTC substrate with common lab. reagents". Are TMSCl,PhNHNH2,Et3N,MeCN,NaCN,Ac2O,AlCl3... readily available ? For the
most users - they are not. |
In my amateur times I had access to a variety of commercial reagents, solvents and other compounds, gathered from all around (of the ones you list I
had PhNHNH2, Et3N, MeCN, Ac2O, but for example, for a long time I could not get any AlCl3). These sources complemented with the so called OTC sources
were enough to do all kind of preparative experiments in organic synthesis. From your posted experiments, I can see you have the same mix of sources.
Why do you think it is any different with others?
| Quote: | | For a longer time, SM promotes only vacuity, idle posts about nothing. Examples from this topic only : |
You are wrong. The moderators do not promote such things. We fight against it. perhaps not as aggressively as you would like, but we do.
So are you joining as a volunteer, or not?
|
|
|
WGTR
National Hazard
Posts: 971
Registered: 29-9-2013
Location: Online
Member Is Offline
Mood: Outline
|
|
I think that the idea behind the thread is interesting to some
people. For me personally, I tend to work in the reverse
direction. If there is something that I would like to synthesize,
then I am motivated to go find out what is needed to be able to
do it. If I want to make 4(5)-methylimidazole, then I go
looking for formaldehyde, ammonia, and then I raid several
sugar packets out of the kitchen. I don't approach it from the
perspective of, "I wonder what I can make with this sugar
packet...", although I think some people are motivated that way.
The point is that I hope you don't take the apparent lack of
response in a discouraging way. If this thread is sticky'd
somewhere, I will probably add some links of my own to it.
But it will probably be few posts, over a long period of time.
I'm more motivated to post links to things that I have actually
done, instead of posting links to other people's stuff. That is
just where my interests are.
|
|
|
Random
International Hazard
Posts: 1120
Registered: 7-5-2010
Location: In ur closet
Member Is Offline
Mood: Energetic
|
|
Alright so oxidation of xylene yields phthalic acid isomers. Phthalic acid could be isolated because it readily forms anhydride which sublimates.
Unlike other two IIRC.
Citrazinic acid can be made from citric and urea. But we haven't researched the whole procedure completely, as far as I know I attempted this many
times and failed to isolate the product. I'll give it a go one more time since I have more solvents now.
[Edited on 5-11-2013 by Random]
|
|
|
watson.fawkes
International Hazard
Posts: 2793
Registered: 16-8-2008
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Nicodem | | The premise of this index is that among these lazy members there are a few who would actually do some work if stimulated and steered in the right
direction. Hence the idea of promoting experimental work by listing experimental proposals and making synthesis references more accessible.
|
For "lazy", you could also read "overwhelmed". With a field so large, there's a certain minimum competence
needed to know even how to start. It's very easy to start looking up something and immediate hit the incomprehensible. What would help, I would think,
is to treat such an index in the same manner as an annotated bibliography, with a bit of commentary about why a synthesis is interesting or where it
fits in the larger picture.
|
|
|
Random
International Hazard
Posts: 1120
Registered: 7-5-2010
Location: In ur closet
Member Is Offline
Mood: Energetic
|
|
A thought that came to my mind now when I read Nicodem's post again is how little we appreciate the effort some members do to help us. Including
Nicodem who I remember that he explained very extensively when I asked something, back in 2010 while I was inexperienced newcomer.
Even if we had a few arguments I could say only positive things today and I support the idea.
|
|
|
smaerd
International Hazard
Posts: 1262
Registered: 23-1-2010
Member Is Offline
Mood: hmm...
|
|
I've done a number of quick funsy organic reactions. If I get enough time to transfer any here I will, other-wise it will have to wait until winter
break unfortunately.
|
|
|
Nicodem
Super Moderator
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
Thank you for offering help.
For the beginning it would be of great help, if the authors of the SM reports would write the pertaining mini-reviews themselves (at least those
members that are still active).
Also, even those members who are too "overwhelmed" to do any literature work, could at least write down the starting materials (OTC compounds)
introductions, things like where can they be commonly obtained, how to purify them, what's their properties and typical chemistry, etc.
|
|
|
DJF90
International Hazard
Posts: 2266
Registered: 15-12-2007
Location: At the bench
Member Is Offline
Mood: No Mood
|
|
I've got something big in the pipeline. But its taking time to piece it all together. Hopefully it will be useful.
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
Nicodem, what do you mean by mini reviews?
Here also seems to be the best place to ask this: Should I write up articles in prepub on the preparation of compounds of which the syntheses and
guides are found on the web, but no such thing exists in prepub?
I have been systematically going through vogel's textbook doing syntheses, but have never really bothered to do an article on them as others can be
found elsewhere (e.g. nitrobenzene, bromobenzene, toluenesulfonic acid,...) should I write an article with pictures nonetheless so that SM has one
too?
all above information is intellectual property of Pyro. |
|
|
Nicodem
Super Moderator
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
See the first post of this topic. This is the topic of this topic, you know?
| Quote: | | Here also seems to be the best place to ask this: Should I write up articles in prepub on the preparation of compounds of which the syntheses and
guides are found on the web, but no such thing exists in prepub? |
Anything that is any kind of a contribution (either to the techniques, methodology, knowledge or science) is welcome in the Prepublication section.
Just an account of how you repeated some reputable prior art is pretty much worthless. It needs some sort of a contribution in the form of new
conclusions or cautions based on the observations, analyses, measurements, unexpected occurrences, failure modes, critical parameters, runaway
conditions, mishaps, improvements, and other issues not yet described in the prior art.
I guess we should have a sticky thread with some sort of disclaimer in the Prepublication section, but I never thought that anybody would actually
need it. After all, the section subtitle says: "A gathering place for topics intended to join our collection of articles." So it appears obvious that
the topics are a sort of articles put forward for peer review.
| Quote: | | I have been systematically going through vogel's textbook doing syntheses, but have never really bothered to do an article on them as others can be
found elsewhere |
Like I said, if you come to any new conclusions, you obviously have something new to contribute. In such case, you should write an article for the
Prepublication section. We have very few, if any, scientific contributions in that section, but we have some very valuable contributions from the
field of methodology, cautions, and some technique improvements. Obviously, you are not expected to have a scientific contribution, when all you do is
repeating published procedures without any development or research, but it is still very likely that you encounter other valuable information to
share.
…there is a human touch of the cultist “believer” in every theorist that he must struggle against as being
unworthy of the scientist. Some of the greatest men of science have publicly repudiated a theory which earlier they hotly defended. In this lies their
scientific temper, not in the scientific defense of the theory. - Weston La Barre (Ghost Dance, 1972)
Read the The ScienceMadness Guidelines!
|
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
