metalresearcher
National Hazard
Posts: 753
Registered: 7-9-2010
Member Is Offline
Mood: Reactive
|
|
Iron spectral color blue: why not in fireworks?
Welding (or arc melting) of steel results in a nice blue arc light which is actually the spectral color of iron, as yellow the color of sodium is.
Why are iron salts not used in fireworks ? Are they too unstable or not volatile enough?
I tried mixing KClO3 and sugar with a bit of CaCl2 which results in a nice red flame. Unfortunately I have no FeCl2, otherwise I tried that when it
is now too hygroscopic.
Any ideas on this?
|
|
Praxichys
International Hazard
Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline
Mood: Coprecipitated
|
|
Are you sure? I think the blue is just from the short wavelength blackbody electromagnetic radiation from the hot material in the arc.
Tig welding of aluminum under a blanket of helium produces the same color, and no iron should be present in that instance.
Empirically, sticking a bit of steel wool into a hot flame produces no blue coloration.
http://chemed.chem.purdue.edu/demos/main_pages/6.2.html
[Edited on 22-10-2013 by Praxichys]
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
According to this source:
http://student.fizika.org/~nnctc/spectra.htm
... the emission spectrum of Fe has many lines in the blue and some in the green.
The reason why iron isn't used as a pyro colourant may lie in the relative intensities of the emission lines, making some elements more suitable than
others.
|
|
Wizzard
Hazard to Others
Posts: 337
Registered: 22-3-2010
Member Is Offline
Mood: No Mood
|
|
Aluminum burns blue in atmosphere, when heated properly Take a ribbon, and burn
it quickly with a hot torch - Bright like magnesium, but blue! I've never seen iron burn blue, however.
|
|
phlogiston
International Hazard
Posts: 1378
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
At lower power levels, some of the emissions of electric sparks do come from the ionized metal gas.
Just play a bit with a modest cap (say a few 1000 uF at 10-20 volts or so), and different metals for electrodes.
Copper gives a distinct green. Aluminum and iron both give blue, but somewhat different tinges.
high-carbon iron yields the characteristic branching sparks.
In an arc-welding situation, however, I also would expect black-body radiation to overwhelm any iron emissions.
In fireworks, the intensity of the emission, the volatility of the relevant species, the chemistry in the flame all come into play. Blue colors in
todays fireworks are most commonly obtained from CuCl<sup>+</sup>, which is formed in a flame containing copper and chlorine species if
the conditions are exactly right. A pure and bright blue is actually notoriously difficult to make.
[Edited on 22-10-2013 by phlogiston]
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer
|
|
bfesser
|
Thread Moved 22-10-2013 at 14:31 |
Trotsky
Hazard to Others
Posts: 166
Registered: 6-2-2013
Location: US
Member Is Offline
Mood: No Mood
|
|
Is it related to the argon used perhaps?
|
|
vulture
Forum Gatekeeper
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
It's not the iron, it's ionized air (or gas):
http://en.wikipedia.org/wiki/Ionized-air_glow
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|