Shaikat Debnath
Harmless
Posts: 1
Registered: 9-9-2013
Member Is Offline
Mood: No Mood
|
|
Buying sodium wire of 0.1-0.3 mm dia
I want to buy some Sodium wire of 0.1-0.3 mm of diameter.
Can anyone suggest me any place/ supplier from where I can buy this sodium wire of 0.1-0.3 mm diameter sodium wire?
Other thing is, does anyone know any method to fabricate sodium in nano-scale spheres into glass substrate?
|
|
|
phlogiston
International Hazard
Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
Sodium wire is normally made shortly before it is needed. Due to its reactivity, it is impractical to store it in a form such as a wire which has a
very large surface area, and it can be easily and quickly extruded moments before it will be used.
0.1-0.3 mm is unusually thin, however. I am curious to hear what application you have in mind!
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
A strange
request. I doubt you'll come across anything, but try a literature search. I can't even imagine a way in which you could disperse sodium metal in a
glass without it reacting or dissolving.
|
|
|
froot
Hazard to Others
Posts: 347
Registered: 23-10-2003
Location: South Africa
Member Is Offline
Mood: refluxed
|
|
I would imagine you'd need to extrude it in situ using a press thats immersed in a bath of inert fluid that's covered with a layer if inert gas.
Doable.
We salute the improvement of the human genome by honoring those who remove themselves from it.
Of necessity, this honor is generally bestowed posthumously. - www.darwinawards.com |
|
|
eidolonicaurum
Hazard to Self
Posts: 71
Registered: 2-1-2014
Location: Area 51
Member Is Offline
Mood: Hydric
|
|
Try this: https://www.youtube.com/watch?v=btvQdW4fXJE&feature=yout...
Its a do-it-yourself, but it enables you to form it as you need it, and gets it to diameter you want. I am of course assuming you have access to
sodium.
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
Vogel has a method for making molecular sodium.
they put Na in a large flask under xylenes, then heat until the xylene refluxes on the neck of the flask. then stopper and shake it until the Na
solidifies. how fine the Na is depends on how hard you shake.
maybe you can start there to get it to your glass substrate.
all above information is intellectual property of Pyro.  |
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
