| Pages:
1
2 |
malford
Hazard to Others
Posts: 116
Registered: 17-6-2013
Member Is Offline
Mood: No Mood
|
|
Monetizing Hobby and Equipment
Typical of my monomaniacal, megalomaniacal ways my hobby of chemistry has begun to outgrow me and my spare room. Help me monetize it so I can justify
further investment of time and money in it.
I have a 3-neck 5L boiling flask with a 45/50 stirrer bearing, talboys overhead stirrer, thermometer and distillation column attached. Also in the set
up are graham condenser, vacuum takeoff and obviously a receiving flask (2L.) Obviously I have the other basic equipment like heater/stirrer, sep
funnel, addition funnel, vacuum flasks, etc. My main interest with this setup initially was distilling nitric acid with sulfuric acid.
Other than selling the distilled nitric acid, how can I monetize this set up or other configurations of it?
[Edited on 5-9-2013 by malford]
|
|
|
Oscilllator
National Hazard
Posts: 659
Registered: 8-10-2012
Location: The aqueous layer
Member Is Offline
Mood: No Mood
|
|
Because of the economies of scale its nigh on impossible to make reagents at a competitive and profitable price. Many threads have been made on this
subject, and the only possible way you could make money is by making niche chemicals, however this would most likely require a very well-equipped lab.
Or of you could make drugs. That's the only sure-fire way to make money with home chemistry that I know of, but its not exactly rick-free.
|
|
|
malford
Hazard to Others
Posts: 116
Registered: 17-6-2013
Member Is Offline
Mood: No Mood
|
|
Chemical Processes that Monetize Hobby Setup
My previous thread was moved to Whimsy. This pissed me off for three reasons: 1) I can't access Whimsy, 2) no one posts in that forum, 3) this forum
was fine. This thread, as was the previous, is about the chemical processes which can be performed using my setup to monetize and justify the further
investment in the same. SM is hosted in NJ, not Switzerland, so show some respect and don't do that again.
Chemical processes = Chemistry in General
Now, what chemical processes, distillations, etc. can I or anyone else who has invested significantly in his or her setup perform to help monetize it?
My set up includes:
5L Wilmad 3-neck Boiling Flask
Talboys overhead stirrer w/ 45/50 PTFE bearing
Distillation column
Graham condenser
2L receiving flask
vacuum adapters
vacuum pump
hotplate stirrers, lab jacks, etc.
I had hopes of selling WFNA to justify and monetize my hobby laboratory. After I produce my first batch I intend to have a professional perform the
assay, bottle and label it. What other chemical processes could be performed with a standard set up like this, which most persons on SM probably have,
that could turn a profit? Which chemicals fetch a high enough retail price that, like WFNA, could turn a profit for very small batches (1-2
liters/kg).
[Edited on 5-9-2013 by malford]
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
CS2 is valuable and hard to get, so is CCl4.
CS2 is made from charcoal and Sulfur at high temp., CCl4 is made by chlorinating CHCl3
all above information is intellectual property of Pyro.  |
|
|
sonogashira
National Hazard
Posts: 555
Registered: 10-9-2006
Member Is Offline
Mood: No Mood
|
|
One thing I recently looked into is turning metallic mercury into its salts. There's a big price-differential between what one can buy mercury for
(even 'used' from ebay etc.) and the cost of the acetate, or chloride etc. I decided not to pursue it for various reasons, but mainly for having no
guaranteed-custom.
Unless selling on ebay (which is self-limiting due to consumer-ignorance, and therefore very low-demand for 'exotic' chemicals), or having a
dedicated-industry to sell to, it is difficult to imagine selling 'common' chemicals even if priced at a fraction of the trade-price: Universities and
large industry research-labs will buy from the big-suppliers without shopping-around.
With organic chemistry you have many more options. Just optimizing the synthesis of one generic herbicide/pesticide could be a viable business. People
make a profit just by buying in bulk and repackaging such things. Flavours and fragrances are interesting areas but the likes of perfume is heavily
marketing-based, and depends little on novel-research or the skill of your chemistry, sad to say.
Gold or precious-metal extraction is rather common these days. If you could find a non-common source of a valuable(/newly-valuable) metal before other
people catch on it could work-out well. As you mention, nitric acid or anything that has high transit-costs or importation-fees are certainly worth
looking into, since this would keep the bulk-price high and make resale more expensive.
[Edited on 5-9-2013 by sonogashira]
|
|
|
DrSchnufflez
Hazard to Others
Posts: 114
Registered: 22-1-2013
Location: Australia
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Pyro  | CS2 is valuable and hard to get, so is CCl4.
CS2 is made from charcoal and Sulfur at high temp., CCl4 is made by chlorinating CHCl3
|
CS2 is also made from the reaction of C2H2 and S8 at 360oC
‘I’m free and easy-I’ll see you there!’
- Our Sunshine, Paul Kelly
|
|
|
phlogiston
International Hazard
Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
I you are aiming at the local amateur science market, consider that anything that is difficult and/or a lot of work to obtain for you will be too for
other people, and therefore worth some money.
However, given the rarity of our hobby, your market will then be quite small so don't expect to make a lot of money. Probably, your time is better
spend (in terms of finances) on an extra part-time job.
Don't bother trying to sell to professional researchers. They buy from one of several large suppliers or call a well-established custom-synthesis lab
if they need something special they can't make themselves.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
malford
Hazard to Others
Posts: 116
Registered: 17-6-2013
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by phlogiston | I you are aiming at the local amateur science market, consider that anything that is difficult and/or a lot of work to obtain for you will be too for
other people, and therefore worth some money.
However, given the rarity of our hobby, your market will then be quite small so don't expect to make a lot of money. Probably, your time is better
spend (in terms of finances) on an extra part-time job.
Don't bother trying to sell to professional researchers. They buy from one of several large suppliers or call a well-established custom-synthesis lab
if they need something special they can't make themselves.
|
My hands (and pockets) are full with with my current business, I have not time for an extra job. My interest here is not a local amateur science
market, but the global amateur science market, i.e. the enthusiast market to which the likes of SA won't sell, especially exotic chemicals that carry
too much liability.
For reasons not mentioned I have taken an interest in chemistry and acquired some equipment and am now simply exploring potential business
opportunities. For example, for around $50 I can produce one liter of WFNA with the setup I have. With a professional assay, bottle and label, this
can obviously be sold for much more.
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Malford:
Please don't use unexplained abbreviations: this is a science forum, not a chat room for mind readers.
I run a chem webstore and know from experience how hard it is to produce things competitively and in sufficient quantities in a lab or home setting
(instead of a proper work shop or small factory). Small batches are almost as time consuming as larger ones, so if your product sells well you're
forever making more and it gets tedious very quickly. And if it doesn't sell well you won't make any money from it either. In the end I switched to
trading these products rather than producing them myself, bar a few exceptions.
At the end of the day it boils down to bottom line: you say can produce 1 L of 'WFNA' (whatever the f*ck that's supposed to be) for 50 bucks. How long
does it take to make, how quickly can you flip it and at what profit, is largely what determines whether this is really worth doing without investing
in larger facilities to produce more in one session.
I brainstorm everyday on stuff I could either make myself or trade profitably: trust me, it ain't easy and everything's a gamble. Some pay off, some
don't.
Things that I think could be of interest to the more upmarket part of the hobbyist market are dioxane and dimethylglyoxime.
[Edited on 5-9-2013 by blogfast25]
|
|
|
Variscite
Hazard to Self
Posts: 69
Registered: 21-5-2013
Member Is Offline
Mood: diffusing
|
|
I think WFNA stands for White Fuming Nitric Acid. Its a quite common abbreviaton ive seen used around here.
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
It's possible. How he can produce that profitably is a mystery to me. Starting from nitrates or nitric acid you just don't add enough value by
converting to WFNA, I think.
|
|
|
woelen
Super Administrator
Posts: 8030
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Another issue, if you are aiming at a global market, is shipping of stuff like white fuming nitric acid. Shipping this from e.g. the USA to Europe is
a real pain and very expensive. If you sell chemicals on a regular basis then you will not get away with cheap (illegal!!) forms of shipping, by
mislabeling parcels and trying to cheat customs. I can imagine that shipping one liter of white fuming nitric acid from the USA to Europe costs a
multiple of the value of the material.
Things which _might_ be interesting is if you succeed in making electrodes for chlorate or perchlorate cells from cheap and easy to obtain materials.
If e.g. you make PbO2-coated electrodes from easily obtainable titanium mesh and lead nitrate and sell these as parts for perchlorate-producing
electrolysis cells then I can imagine you can make a profit of it. You, however, then need to be able to make good quality electrodes in sufficient
quantities. This is a science and an art on its own!
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
actually rare metal salts do well,
I spent 40 EUR on 31,1000g of silver, that's enough to make about 120g of Ag3PO4
on ebay the only seller wants 30USD for 10g. that means an initial investment of 40EUR can give returns as high as 360USD
also silver nitrate and chloride are good ways to go
all above information is intellectual property of Pyro. |
|
|
DJF90
International Hazard
Posts: 2266
Registered: 15-12-2007
Location: At the bench
Member Is Offline
Mood: No Mood
|
|
Its a difficult thing to do. Potential eBay customers are likely amatuer chemists like yourself, and so anything you can make, they can probably make
for the same cost themselves, unless you have resources (whether it be equipment or chemicals) that make it possible for you to make things they
can't.
Even then, theres certain issues that need to be addressed:
How can you be sure your product is what you think it is?
How can you confirm the purity of your product?
Is your product likely to be suitable for the average amatuer chemist? Is it appreciably toxic or difficult to handle (pyrophoric? excessively
corrosive?)?
Is your product a potential drug or drug precursor?
Can you charge a price that makes you a profit, but also one that people don't mind paying?
One thing that comes to mind is element samples. Zan Divine (a member here) was selling ampoules of alkali metals to element collectors. I'm sure he
probably made a reasonable profit out of that, but its something that requires alot of skill and patience to get aesthetically pleasing samples that
people will shell out cash for.
[Edited on 5-9-2013 by DJF90]
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
this week end I am going to purify it as bet I can. the silver was 999 and the nitric acid 99+% the phosphoric acid was from the accident, I'm
assuming that was reasonably pure.
I am going to boil it in water, filter it out, weigh and bottle it.
all I want is a return on my investment, getting AgNO3 back from Ag3PO4 is very hard. I would like 60 EUR+ for all of it.
the appearance is slightly off white, not brown as the wiki image or yellow like the other samples on the internet
you can sell whatever you want. I can sell:''empty white phosphorus bottle 10g'' on ebay like my good polish friend
[Edited on 5-9-2013 by Pyro]
all above information is intellectual property of Pyro. |
|
|
Marvin
National Hazard
Posts: 995
Registered: 13-10-2002
Member Is Offline
Mood: No Mood
|
|
The looks like a troll thread for a lot of reasons. OP is asking questions on all of our minds and showing no understanding whatsoever of the
practical, safety, legal or ethical aspects. If the regulating body chooses to classify what he's doing as a commercial enterprise he may be breaking
the law just by venting gasses or flushing salts (hazardous waste) down the drain. That's probably the most trivial problem. If someone takes his
WFNA and makes an explosive to blow up a building he could be an accessory to terrorism.
So how about we show malford some respect when he shows us some clue.
|
|
|
Varmint
Hazard to Others
Posts: 264
Registered: 30-5-2013
Location: Near Atlanta, GA
Member Is Offline
Mood: No Mood
|
|
Marvin:
EXACTLY! I can't imagine one single country on earth where production of reagants for sale would be sanctioned without benefit of a license.
Its not like the lady making and selling soap at the weekend fair where the end product is ready for use, heck, in most counties in the US they'd want
her licensed too.
I'll liken this to gun cartridge reloading. I can buy as much raw material and load as many cartridges as I care to, but I break the law and become a
criminal if sell so much as one of them. I believe its also illegal to give them away.
Yep, I saw this as a trollish post too.
DAS
|
|
|
sonogashira
National Hazard
Posts: 555
Registered: 10-9-2006
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Varmint | | I can't imagine one single country on earth where production of reagants for sale would be sanctioned without benefit of a license.
|
What?!
|
|
|
Varmint
Hazard to Others
Posts: 264
Registered: 30-5-2013
Location: Near Atlanta, GA
Member Is Offline
Mood: No Mood
|
|
OK, civilized country.
Better?
DAS
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
well, you don't need to say you made it, you can say it was from a chemistry lab auction or such
all above information is intellectual property of Pyro. |
|
|
Sublimatus
Hazard to Others
Posts: 108
Registered: 8-6-2011
Member Is Offline
Mood: No Mood
|
|
In my dabbling in finding ways to make money out of a home lab, I think the most imposing obstacle has been grappling with hazmat shipping regulations
(in the US, anyway). There is quite a lot of regulation to be aware of and understand.
Also, it seems to me that it's essentially impossible to ship true hazardous materials (not dangerous goods with limited quantity exceptions) to
residential addresses legally. Most carriers will simply not do it, especially if you as the shipper are not a registered business at a business
address, and can prove that you've received training in the Department of Transportation Hazmat regulations. One could always snub these regulations,
but the fines and penalties are quite high, and I can't imagine one will make it very far on luck if one plans to do business for an extended period
of time.
Of course, not all materials that might be profitable are dangerous or hazardous goods, but shipping regulations are certainly something to think
about before acting on any business aspirations related to chemistry.
|
|
|
bfesser
|
Threads Merged
5-9-2013 at 20:36 |
ElizabethGreene
Hazard to Others
Posts: 141
Registered: 15-10-2012
Member Is Offline
Mood: No Mood
|
|
I've found a small market for Silver Nitrate to potters for Roku glazes. One caution: Pottery supply houses have many different chemicals available
including a wide variety of metal oxides and salts. The one I frequent has dozens of beautiful pots and containers too.
I have yet to leave without spending money. :/
|
|
|
mr.crow
National Hazard
Posts: 884
Registered: 9-9-2009
Location: Canada
Member Is Offline
Mood: 0xFF
|
|
Selling things to hobbyists is a great way to get into a niche market with a potential for growth. An example would be Sparkfun which has turned into a huge player in the amateur electronics market.
The definition of Hobby is "An activity done regularly in one's leisure time for pleasure". I agree it should be about intellectual stimulation and not money. In
fact over the years I have spent shitloads of money on science and electronics things so it would be a net financial loss even if I did try and
monetize it.
In terms of chemistry I think its simply not worth the risk. The things being discussed here are exceedingly dangerous.
If you do have an idea the best way would be to start a real business with a real plan, real investors and real licenses. If you incorporate your
liability will be limited and personal assets will be protected. Also lower taxes.
Double, double toil and trouble; Fire burn, and caldron bubble
|
|
|
malford
Hazard to Others
Posts: 116
Registered: 17-6-2013
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by mr.crow | Selling things to hobbyists is a great way to get into a niche market with a potential for growth. An example would be Sparkfun which has turned into a huge player in the amateur electronics market.
The definition of Hobby is "An activity done regularly in one's leisure time for pleasure". I agree it should be about intellectual stimulation and not money. In
fact over the years I have spent shitloads of money on science and electronics things so it would be a net financial loss even if I did try and
monetize it.
In terms of chemistry I think its simply not worth the risk. The things being discussed here are exceedingly dangerous.
If you do have an idea the best way would be to start a real business with a real plan, real investors and real licenses. If you incorporate your
liability will be limited and personal assets will be protected. Also lower taxes. |
I have an LLC, but don't like overhead and large investments into new businesses. I test the waters and build a business once I find a demand. I
wouldn't dare gamble on something like this. My vision is for a Spark Fun (SF) of chemistry. In other words, a professional version of United Nuclear.
Of course, you might say this is Sigma Aldrich (SA), et al., but I would sell in quantities small enough that liability wouldn't matter much such that
I could sell to hobbyists and enthusiasts, unlike SA. Over certain amounts, you'd need an intended use form or business entity and address.
If I found a decent demand, I'd go ahead and transition from eBay to Amazon and/or eventually a branded website like SF. I'm experienced with online
sales.
---
Sublimatus, what chemical products have you found to be potentially profitable? Shipping concerns can easily be navigated -- pun intended.
Silver nitrate has popped up a couple of times in this conversation. Has anyone produced this profitably?
|
|
|
Plutonium239
Harmless
Posts: 10
Registered: 2-9-2013
Location: South Carolina
Member Is Offline
Mood: No Mood
|
|
I agree with Pyro. Uncommon metal salts do very well on eBay. You could consider the manufacture of chemical and element samples, since they sell
quickly too. I've actually considered selling small, visible amounts of chlorine as element samples for collectors. Considering my experiences as
one, I think others on eBay would eat that up.
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
