Pages:
1
2
3
..
6 |
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Arsenic from Skutterudite
A few years ago, I picked up a sample of skutterudite ((Co,Ni,Fe)As3). I'd like to know if it's possible to isolate pure arsenic metal from
this. I'd like to avoid the formation of arsine (AsH3), as even with ground-glass apparatus I don't feel safe from that. My guess would be
to sublime arsenic oxide off in a closed reactor (capped steel pipe + blowtorch?), and then hydrolyze the arsenic (III) oxide to yield arsenous acid
in solution. Could I then reduce this in solution with aluminum foil to yield arsenic powder?
On another note, is a 'thermite' of arsenic oxide possible (again, steel tube + blowtorch reagent mix As2O3 + Al powder, arsenic
sublimes out due to volatility (SP = 615 C)?)
Sorry for the jumbled collection of thoughts - I really have no knowledge of arsenic chemistry.
[Edited on 3-9-2013 by elementcollector1]
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
Magpie
lab constructor
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
This may help:
http://www.sciencemadness.org/talk/viewthread.php?tid=12045#...
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
bfesser
Resident Wikipedian
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
I didn't know these contained arsenic:
<img src="http://www.reddwarf.co.uk/news/2005/12/23/the-first-skutter/dvd_the_first_skutter_231205_2.jpg" alt="skutter" />
[sorry, couldn't resist]
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by elementcollector1 ![](images/xpblue/lastpost.gif) | On another note, is a 'thermite' of arsenic oxide possible (again, steel tube + blowtorch reagent mix As2O3 + Al powder, arsenic
sublimes out due to volatility (SP = 615 C)?)
[Edited on 3-9-2013 by elementcollector1] |
Aluminothermy of As2O3 would be a profoundly BAD idea. 'Thermite' mixtures routinely develop temperatures in excess of 2,000 C
and higher (depending on target oxide and other factors) and with a sublimation point of only 615 C that's a recipe for arsenic flying all over the
place, because such reactions are hard to control. I'm sure you understand that would be a very bad thing.
Like antimony it can probably be obtained from roasting its oxide with carbon at high temperature, the element then sublimes off.
My advice with regards to arsenic preparation? Unless you are well equipped and well versed in its chemistry, leave well alone! Far too toxic.
[Edited on 3-9-2013 by blogfast25]
|
|
Pulverulescent
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 793
Registered: 31-1-2008
Member Is Offline
Mood: Torn between two monikers ─ "hissingnoise" and the present incarnation!
|
|
Skutterudite ─ a highly learned mineral . . .
"I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones"
A Einstein
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
I am just not getting these references today... First a robot, and now a scholar?
Anyway, what I meant was that the mixture would be in a *closed* steel tube, so that any arsenic that sublimed off would recondense on one of the caps
(similar to the decomposition of arsenic sulfide mentioned in Magpie's linked thread). Unfortunately, that thread mentions that the pressure would be
too great for even a quartz ampoule, so that's out of the question. In that case, I guess the way to go would be to produce arsenic using 'wet'
chemistry, and then sublime it into crystals so long-term storage is safer.
A wet-chem method I keep hearing about is SnCl2, HCl and arsenic chloride. However, I'm confused, as arsenic trichloride reacts with water
to form arsenous acid (As(OH)3) and chlorine. Maybe this is what the extra HCl is for?
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
AsCl3 does not give chlorine with water, but it gives HCl and arsenious acid. This is an equilibrium reaction and in very concentrated HCl the
reaction is more on the side of AsCl3. That is the reason of adding extra HCl. Without that, nearly all AsCl3 would hydrolyse.
If SnCl2 is used, then another reason for using lots of HCl is to keep this and its oxidation product dissolved. SnCl2 is notoriously sensitive to
hydrolysis (formation of HCl and Sn(OH)2) and solutions in water always are somewhat turbid. The oxidation product, containg tin in oxidation state +4
is even more sensitive to hydrolysis.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
If I dissolved skutterudite in HCl, would a product be arsine? It seems likely, as the same reaction occurs for sulfides (producing hydrogen sulfide).
If so, would a way to avoid this be passing dry Cl2 over the powdered mineral?
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
Pok
potassium Prometheus
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 176
Registered: 5-12-2010
Member Is Offline
|
|
Yes! I think arsine would be evolved! You shouldn't try this!
Why don't you simply buy arsenic? It can be found in mineral stores for very low prices. You can easily make very pure arsenic from this just by
subliming it in a test tube. But in most cases the "native arsenic" that you can buy is pure enough for an element collection. I heated a small piece
in a test tube and a mirror of arsenic was produced with crystals of arsenic (in absence of air and in a fume hood!).
![](http://www.versuchschemie.de/upload/files3/97970556_4948.jpg)
Bad photo quality, looks better in reality.
This is by far the easiest and safest way to get some arsenic (no toxic wastes, no difficult/dangerous procedure)
BTW: arsenic trioxide can also be made from arsenic and it shows a remarkable property: crystalloluminescence , the strongest known. And also very strong white triboluminescence (same link)! (translation with google if required)
[Edited on 4-9-2013 by Pok]
|
|
12AX7
Post Harlot
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Fascinating; As dissolves in sulfuric acid, reducing some of the acid to SO2? Looks like a great yield (of As2O3 crystals). Cool!
As I recall, arsenic can be reduced from solution, similar to Se and Te? Or is it just those...
I would also suppose, once you isolate As2O3, a ground-up mixture with charcoal should distill (well, sublimate) elemental As under similar conditions
to the picture above, and accordingly, in high purity. Probably under inert conditions (CO2, N2 or etc.), but not vacuum. The active ingredient in
carbon reduction is often CO; the same reaction might be done under a stream of CO, with more expensive equipment of course (CO generator, reaction
tube, connectors). The reduction could also be done with hydrogen, with the obvious danger of AsH3, but that decomposes over 200C so it should be a
fine method as well. I think you'd want to stick with nonmetals and gasses for reduction, as metallothermic reduction will produce arsenides as
impurities (compare to Mg + SiO2 thermite making silicide), besides the drawback of the low boiling point.
That said, metallothermic reduction in a bomb might be interesting. Like the sodium reaction, it should produce a lump of fused arsenic, which would
be an unusual sample for the collector.
Tim
|
|
watson.fawkes
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2793
Registered: 16-8-2008
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by 12AX7 ![](images/xpblue/lastpost.gif) | Probably under inert conditions (CO2, N2 or etc.), but not vacuum. The active ingredient in carbon reduction is often CO; the same reaction might be
done under a stream of CO, with more expensive equipment of course (CO generator, reaction tube, connectors). | You want a reduction with CO under CO2 cover with extra N2? That's what you get from a forced air fire with insufficient oxygen, in
other words, a reducing flame. I'll admit the reaction vessel etc. is indeed extra gear, but the CO generator isn't difficult at all.
|
|
bfesser
Resident Wikipedian
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Pok ![](images/xpblue/lastpost.gif) | BTW: arsenic trioxide can also be made from arsenic and it shows a remarkable property: crystalloluminescence , the strongest known. And also very strong white triboluminescence (same link)! (translation with google if required)
| Interesting. I had never heard of <a href="https://en.wikipedia.org/wiki/Crystalloluminescence"
target="_blank">crystalloluminescence</a> <img src="../scipics/_wiki.png" /> before now. Thanks for sharing that link.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Quote: Originally posted by Pok ![](images/xpblue/lastpost.gif) | Yes! I think arsine would be evolved! You shouldn't try this!
Why don't you simply buy arsenic? It can be found in mineral stores for very low prices. You can easily make very pure arsenic from this just by
subliming it in a test tube. But in most cases the "native arsenic" that you can buy is pure enough for an element collection. I heated a small piece
in a test tube and a mirror of arsenic was produced with crystals of arsenic (in absence of air and in a fume hood!).
![](http://www.versuchschemie.de/upload/files3/97970556_4948.jpg)
Bad photo quality, looks better in reality.
[Edited on 4-9-2013 by Pok] |
That should belong in Pretty Pictures...
I've yet to find native arsenic, try though I may... You're right that this is dangerous, but my budget is very low.
What about burning the powdered skutterudite in a closed area - this should produce Fe2O3, NiO, and CoO as well as sublimed
As2O3, correct? This would avoid the hazardous arsine, and if the container were well sealed, be almost safe.
[Edited on 4-9-2013 by elementcollector1]
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
bfesser
Resident Wikipedian
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
A sample of powdered ore
or a mineral specimen?
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Mineral specimen - about a 2"- by- 3"- by- 2" lump of metallic substance.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
EC1:
It could be worth grinding a pinch of it down and trying to sublime it in a test tube. The As might just sublime off, who knows? It definitely
sounds more like an alloy than a compound...
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Quote: Originally posted by blogfast25 ![](images/xpblue/lastpost.gif) | EC1:
It could be worth grinding a pinch of it down and trying to sublime it in a test tube. The As might just sublime off, who knows? It definitely
sounds more like an alloy than a compound... |
According to the Wiki, it has a definite structure and arsenides are well known. But I'll give it a shot, see what I come up with. The test tube will
be sealed first, obviously - I'll crack it open after the experiment.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
12AX7
Post Harlot
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
I don't have phase diagrams for most arsenides, but the phosphides and antimonides that I do have seem to suggest somewhere between compound and
intermetallic behavior with the Fe-Ni-Co crowd. I think they'll be reasonably stable. At the very least, there will be high (solid or liquid state)
affinity or solubility of As, so the partial pressure will be small. It is certainly possible to liberate P, As or Sb from any of these compounds
with enough heating, vacuum and time, but that doesn't mean you want to bother.
If, instead of only heating the arsenides to drive off arsenic, they were slowly oxidized (let some oxygen leak into the vacuum?), it would push the
equilibrium significantly. The result would probably be a combination of metal oxides and As (otherwise, As2O3 and metals). Of course, slow
oxidation of the whole thing would give separation of the oxides. (You'd also want to check on the stability of the arsenites and arsenates, but it's
likely these decompose with heating, just as the sulfates do.)
Tim
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
As2O3 boils at just 465 degrees C, so this could well separate the oxide from the rest. What to do with the oxide, however, is another thing entirely.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
bfesser
Resident Wikipedian
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
Has anyone bothered to do a lit. search on possible use of this mineral as an ore?
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
All I found from a cursory search was that it finds a use as a cobalt and sometimes-nickel ore, with arsenic as the byproduct. I did find a source for
purification by sublimation of arsenic:
Quote: | Wikipedia:
On roasting in air of arsenopyrite, arsenic sublimes as arsenic(III) oxide leaving iron oxides,[18] while roasting without air results in the
production of metallic arsenic. Further purification from sulfur and other chalcogens is achieved by sublimation in vacuum or in a hydrogen atmosphere
or by distillation from molten lead-arsenic mixture |
[Edited on 6-9-2013 by elementcollector1]
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Quote: Originally posted by 12AX7 ![](images/xpblue/lastpost.gif) | Fascinating; As dissolves in sulfuric acid, reducing some of the acid to SO2? Looks like a great yield (of As2O3 crystals). Cool!
As I recall, arsenic can be reduced from solution, similar to Se and Te? Or is it just those...
I would also suppose, once you isolate As2O3, a ground-up mixture with charcoal should distill (well, sublimate) elemental As under similar conditions
to the picture above, and accordingly, in high purity. Probably under inert conditions (CO2, N2 or etc.), but not vacuum. The active ingredient in
carbon reduction is often CO; the same reaction might be done under a stream of CO, with more expensive equipment of course (CO generator, reaction
tube, connectors). The reduction could also be done with hydrogen, with the obvious danger of AsH3, but that decomposes over 200C so it should be a
fine method as well. I think you'd want to stick with nonmetals and gasses for reduction, as metallothermic reduction will produce arsenides as
impurities (compare to Mg + SiO2 thermite making silicide), besides the drawback of the low boiling point.
That said, metallothermic reduction in a bomb might be interesting. Like the sodium reaction, it should produce a lump of fused arsenic, which would
be an unusual sample for the collector.
Tim |
Bringing this back because I missed this post.
Does this apply to arsenides? I feel like it wouldn't, it would just make arsine due to the H+ ions and the negative arsenide ions.
In that case, is there any wet way to produce arsenic oxide from an arsenide? I think it might be possible to roast the mineral with molten sodium
hydroxide to form sodium arsenate, and acidify this to precipitate arsenic (hydr)oxide. This would not affect the cobalt, iron or nickel to my
knowledge.
I still have yet to try sublimating this material in a closed test tube (nerves more than anything), or do any wet chemistry (due to that arsine
hazard).
It appears at this point that isolating As2O3 will be the tricky part of this. The reduction with HCl and SnCl2 seems
fairly straightforward, but I have one question for this step: Presuming I filter and wash the arsenic precipitate, as well as all arsenic-containing
wastes from earlier, how do I dispose of them safely? As far as I know, there is no 'safe' form of arsenic.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Safest way is probably to recover all As as some solid, insoluble compound. Then mix with cement and after hardening dispose at your local tip as
'non-recyclable'.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Sounds good. What about all the filters and such that will be undoubtedly contaminated?
Found that when precipitated arsenic oxide is mixed with sodium hydroxide in solution and boiled, it goes back into solution as sodium arsenite. This
would then be filtered off from the precipitated metal hydroxides (mostly cobalt), since none are amphoteric in this case. The solution would then be
acidified, and this would precipitate arsenic trioxide again, correct? If so, this is a convenient and simple wet-chemistry route to arsenic trioxide.
However, the question remains as to precipitating arsenic trioxide in the first place, while avoiding arsine. Acids cannot be used, as arsenides react
with any strong acid to give arsine. Bases might be possible due to the arsenite double salt. In this case, what would be the products of the
reaction?
Additional note: Formula of skutterudite is actually CoAs3, with occasional substitutions of Ni and Fe.
??CoAs3 + ??NaOH -> ??Na3AsO3 + ???(Co)
[Edited on 12-21-2013 by elementcollector1]
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Just include any kind of solid waste too.
It may not be ideal but it's better than to get the 'smurf suited people' in at high cost and with suspicion falling on yourself ('what's a non
chemist private person messing about with a mega poison for like this?') and the search for bodies to start!
|
|
Pages:
1
2
3
..
6 |