GammaFunction
Hazard to Self
Posts: 78
Registered: 28-1-2013
Member Is Offline
Mood: No Mood
|
|
Is D-Limonene a good solvent for things like extractions?
D-Limonene is nearly insoluble in water (18 mg/L). It has a dipole moment of 0.29D, less than ether or DCM. And it's biodegradable and non-toxic, though human toxicity studies are
limited. However, it has a BP of 176C, which would make removal a nuisance.
It's also a fairly cheap an easy to obtain consumer good.
Would it be a good solvent for things like caffeine/theobromine/capsaicin extractions, as a safe, environmentally benign alternative to ether, DCM,
and chloroform? How about as an eluent in chromatography columns?
(Yes, I checked the search engine; there isn't much info)
|
|
|
bahamuth
Hazard to Others
Posts: 384
Registered: 3-11-2009
Location: Norway
Member Is Offline
Mood: Under stimulated
|
|
It tends to oxidize leaving a brown tar like substance with contact with air and especially when heated in my experience. Also as mentioned the high
boiling point makes it unsuitable as a regular solvent, more pronounced in extractions.
Any sufficiently advanced technology is indistinguishable from magic.
|
|
|
kristofvagyok
National Hazard
Posts: 659
Registered: 6-4-2012
Location: Europe
Member Is Offline
Mood: No Mood
|
|
Yes, that's the point. A solvent what got a boiling point high as that it aint so good if you are using it for extracting anything. Lot things will
simply decompose at that temperature if you are distilling it down.
If using vacuum during removing this "solvent" a lot thing will come through before or with the limonene and also it is good not to forget those
double bonds in the molecule, that doesn't good really good.
But if you are using it for special purposes than it could be good. We use DMF, DMSO ect. as solvents while they have such high boiling point. Just
have to know that what you need and if you have a proper vacuum there will be no problem.
I have a blog where I post my pictures from my work: http://labphoto.tumblr.com/
-Pictures from chemistry, check it out(:
"You can’t become a chemist and expect to live forever." |
|
|
GammaFunction
Hazard to Self
Posts: 78
Registered: 28-1-2013
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by kristofvagyok  |
Yes, that's the point. A solvent what got a boiling point high as that it aint so good if you are using it for extracting anything. Lot things will
simply decompose at that temperature if you are distilling it down. .... |
That's sort of what I suspected. How about using a warm air stream (or bubbling air) for evaporation?
Don't mean to beat a dead horse, but for the amateur there's something very appealing about its environmentally benign nature, and any inconvenience
might be balanced out by eliminating the need for hazardous waste disposal.
|
|
|
bahamuth
Hazard to Others
Posts: 384
Registered: 3-11-2009
Location: Norway
Member Is Offline
Mood: Under stimulated
|
|
I would just try, though I doubt it's worth it.
But it depends what you want to extract, if you had a scheme we could advise you better on an account of what you are trying to do.
If you plan to implement this as a solvent in your lab I'd try to oxidize it, under a stream of air preferably heated somewhat, and If you are
satisfied by the end result you should go for it. But I warn you, I tried the same thing sort of, brown gunk ensued...
Any sufficiently advanced technology is indistinguishable from magic.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
