Pages:
1
2 |
Chemistry_Keegan
Harmless
Posts: 45
Registered: 16-2-2013
Location: Nova Scotia
Member Is Offline
Mood: Interested
|
|
Purification Of Acetic Acid From Vinegar
Does anyone have some really easy and efficient methods of purifying acetic acid from vinegar with the use of only household items? My vinegar is
almost always five percent acetic acid and ninety-five percent water, if that helps at all.
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Fractionated distillation. Assuming that by 'purifying acetic acid' you mean obtaining a higher percentage of acetic acid (ethanoic acid).
Or react vinegar with slaked lime (Ca(OH)2) to obtain calcium acetate. Treat calcium acetate with sulphuric acid in a typical displacement reaction:
Ca(OH)2(s) + 2 HOAc(aq) ===> Ca(OAc)2(aq) + 2 H2O(l)
Concentrate the calcium acetate by boiling in:
Ca(OAc)2(s or aq) + H2SO4(aq) === > CaSO4(s) + 2 HOAc(aq)
Do it right and you can concentrate your acetic acid quite a bit.
[Edited on 17-2-2013 by blogfast25]
|
|
Fantasma4500
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1681
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline
Mood: dangerously practical
|
|
i have heard that freezing vinegar should make the crystals precipitate out in the solution due to its higher melting point than water but i had no
success with it tho..
it might be an effect called ''freezing depression'' but before you take that for true im not even sure what that is (:
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Antiswat ![](images/xpblue/lastpost.gif) | it might be an effect called ''freezing depression'' but before you take that for true im not even sure what that is (: |
No, freezing point depression is something else. FPD is what causes seawater to freeze a few degrees below the MP of pure water: the dissolved salt
causes freezing point depression. In the past FPD was used frequently to determine the molecular weight of newly discovered substances.
To check if freezing vinegar will separate out either pure ice first, or a hydrate of acetic acid or even pure acetic acid itself, you need to consult
a temperature-phase diagram for the system ethanoic acid/water. Personally I strongly doubt it...
|
|
DerAlte
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 779
Registered: 14-5-2007
Location: Erehwon
Member Is Offline
Mood: Disgusted
|
|
Quote: | EFFECT OF SWEATING ON THE PURITY IN MELT CRYSTALLIZATION
W. S. Choi, K. J. Kim
Crystallization Process & Engineering Laboratory, Department of Chemical
Engineering, Hanbat National University, Yuseong, Daejeon 305-719, South Korea |
... From my off-line library, gotten from the web. Google it. Blogfast, you are wrong this time. I have done it.
Why do people capable of writing a post first not take the time to consult the web and UTFSE of this site. This topic has been covered numerous times.
I do not have the patience or inclination to place the above by FTP on the site, or find the reference here to the subject on this sites for the lazy
or stupid. {Not you, blogger, old pal! - you are usually right}.
Der Alte
|
|
KonkreteRocketry
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 165
Registered: 12-11-2012
Location: Dubai
Member Is Offline
Mood: No Mood
|
|
Does any one know if freezing would work ?
|
|
K12Chemistry
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 63
Registered: 3-1-2013
Member Is Offline
Mood: No Mood
|
|
I tried it and part of it freezes while the other doesn't. You could try it yourself and see if it works. Experimentation is the core of the
scientific method.
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
DerAlte, well I stand corrected, gladly by you!
Quote: Originally posted by K12Chemistry ![](images/xpblue/lastpost.gif) | I tried it and part of it freezes while the other doesn't. You could try it yourself and see if it works. Experimentation is the core of the
scientific method. |
Sure but what you're saying isn't very scientific either. What temperature did you use? How much froze and how much not? And what was the solid: pure
glacial acetic acid or some acetic acid/water containing phase?
Now I'm off to buy some distilled vinegar! ![:D](./images/smilies/biggrin.gif)
[Edited on 18-2-2013 by blogfast25]
|
|
K12Chemistry
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 63
Registered: 3-1-2013
Member Is Offline
Mood: No Mood
|
|
I don't know. All I'm saying is that it was left in there for about 3 days. If it was completely water it would have frozen solid. So it did purify to
an extent. I'm suggesting to try it because it would be easier than asking on a forum.
|
|
Magpie
lab constructor
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
Quote: Originally posted by K12Chemistry ![](images/xpblue/lastpost.gif) | I tried it and part of it freezes while the other doesn't. You could try it yourself and see if it works. Experimentation is the core of the
scientific method. |
Yes, but by UTFSE you can easily learn much and get fresh ideas:
I admit that this one is hard to find:
http://www.sciencemadness.org/talk/viewthread.php?tid=2194
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Thanks Magpie.
|
|
Manifest
Script Kiddie Asshole
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 229
Registered: 7-12-2012
Member Is Offline
Mood: No Mood
|
|
Why can't we just simply concentrate the acetic acid by boiling it? It has a boiling point of 118C
|
|
ScienceSquirrel
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1863
Registered: 18-6-2008
Location: Brittany
Member Is Offline
Mood: Dogs are pets but cats are little furry humans with four feet and self determination!
|
|
Vinegar is only 4 -6% acetic acid so we have to use some method of stripping out the acetic acid in a pre concentration step before distillation.
Pyroligneous acid was used as a source of acetic acid and reaction with calcium carbonate, hydroxide or oxide was used to form calcium acetate, this
was then filtered out and then heated with sulphuric acid to make acetic acid.
Another approach is to use diethyl ether or ethyl acetate as a stripping solvent.
Under optimum conditions this can remove all but 0.1% of the acetic acid and the solvent left in the water phase is stripped out before the water is
discharged.
Distillation of the solvent acetic acid phase yields high purity acetic acid.
|
|
starman
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 318
Registered: 5-7-2008
Location: Western Australia
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by ScienceSquirrel ![](images/xpblue/lastpost.gif) | Use diethyl ether or ethyl acetate as a stripping solvent.
Under optimum conditions this can remove all but 0.1% of the acetic acid and the solvent left in the water phase is stripped out before the water is
discharged.
Distillation of the solvent acetic acid phase yields high purity acetic acid. |
This sounds a better system than the acetate/conc sulfuric acid method that I have used.
Perhaps used in combination with freeze concentration to bring the bulk of the dilute solution down somewhat.
Presumably the solvent phase is dried prior.Molecular sieve?
[Edited on 23-2-2013 by starman]
Chemistry- The journey from the end of physics to the beginning of life.(starman)
|
|
toothpick93
Harmless
Posts: 44
Registered: 26-2-2013
Member Is Offline
Mood: No Mood
|
|
If you Started off with 1000mls of house hold vinegar and boiled it down to about 100mls or so, and then added bulk Anhydrous Copper Sulfate (in
intervals) could you eventually get a higher concentration of acid as the salt absorbs the water leaving the acid? then you can try crystallize it out
by freezing it?
|
|
DONALD W
Harmless
Posts: 7
Registered: 15-2-2013
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by DerAlte ![](images/xpblue/lastpost.gif) | Quote: |
Why do people capable of writing a post first not take the time to consult the web and UTFSE of this site. This topic has been covered numerous times.
I do not have the patience or inclination to place the above by FTP on the site, or find the reference here to the subject on this sites for the lazy
or stupid. |
Have you ever heard the saying,"call no man a fool", probably not and even if you did, you would most likely not heed the warning.
|
|
|
starman
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 318
Registered: 5-7-2008
Location: Western Australia
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by toothpick93 ![](images/xpblue/lastpost.gif) | If you Started off with 1000mls of house hold vinegar and boiled it down to about 100mls or so, and then added bulk Anhydrous Copper Sulfate (in
intervals) could you eventually get a higher concentration of acid as the salt absorbs the water leaving the acid? then you can try crystallize it out
by freezing it? |
Unfortunately not that simple.Forms an azetrope,so you'd end up with 100mls of the starting concentration (maybe a slight increase.)
Chemistry- The journey from the end of physics to the beginning of life.(starman)
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4299
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Quote: Originally posted by starman ![](images/xpblue/lastpost.gif) | Quote: Originally posted by toothpick93 ![](images/xpblue/lastpost.gif) | If you Started off with 1000mls of house hold vinegar and boiled it down to about 100mls or so, and then added bulk Anhydrous Copper Sulfate (in
intervals) could you eventually get a higher concentration of acid as the salt absorbs the water leaving the acid? then you can try crystallize it out
by freezing it? |
Unfortunately not that simple.Forms an azetrope,so you'd end up with 100mls of the starting concentration (maybe a slight increase.)
|
My CRC assures me that water and acetic acid do not form an azeotrope. (D-12 of the 70th edition). However, the boiling points aren't that different,
so if you boiled the solution at about 100oC, the vapour pressure of acetic acid would be 400 mmHg (D-199, CRC) times the mole fraction of about 0.02
so about 8 mmHg out of the atmosphere...the vapour you'd get off would be about 1% acetic acid (by number of moles). This is about half the
concentration of the original vinegar, so if you boil off half of the vinegar, you'd increase the concentration of acetic acid from 5% to 7.5% (and
the collected distillate would be about 2.5%).
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
franklyn
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 30-5-2006
Location: Da Big Apple
Member Is Offline
Mood: No Mood
|
|
Grocery store generic brand distilled white vinegar is 6 % acetic acid.
You will need 4 gallons to obtain one quart near 100 % concentration.
For what it costs you to process you are better off buying.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=35043...
.
|
|
hyfalcon
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1003
Registered: 29-3-2012
Member Is Offline
Mood: No Mood
|
|
You can also order direct from the same seller. http://www.dudadiesel.com/search.php?query=acetic
I've used them before and they sell to individuals.
[Edited on 28-2-2013 by hyfalcon]
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
To get into Silver Chemistry, you may which to make Silver acetate from dissolving Ag in a Vinegar/H2O2 solution. As long as the solution remains
acidic, the Silver acetate is soluble. Dilute and the Silver acetate could precipitate (I have made AgC2H3O2, but always kept it dissolved as a path
to other silver salts).
Now, to make more conc Acetic acid, add a slight excess of the AgC2H3O2 precipitate to HCl:
AgC2H3O2 + HCl --> AgCl (s) + CH3COOH
remove the white Silver chloride from your new conc Acetic acid. To prepare HCl, see a recent thread.
No HCl, perhaps the following approach of passing an excess of CO2 into a cold conc AgC2H3O2 solution:
2 AgC2H3O2 + H2O + CO2 --> Ag2CO3 (s) +2 CH3COOH
--------------------------------------------------
Another path, place the AgC2H3O2 in a small amount of water and let it sit in sunlight. My speculation (and it is speculation as the only thing I have
observed is that Silver acetate dissolved in Acetic acid will decompose in modest light in time with the creation of a grey Ag suspension and not
Ag2O):
AgC2H3O2 + H2O --Light--> AgOH (s) + CH3COOH
2 AgOH ---> Ag2O + H2O
So on net:
AgC2H3O2 + H2O --Light--> 1/2 Ag2O (s) + 1/2 H2O + CH3COOH
and even more problematic is that this reaction seems reversible, so may only work in dilute solutions. It may be better to let the solution stand in
light in open air as CO2 could help push the reaction.
[Edited on 1-3-2013 by AJKOER]
|
|
ScienceSquirrel
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1863
Registered: 18-6-2008
Location: Brittany
Member Is Offline
Mood: Dogs are pets but cats are little furry humans with four feet and self determination!
|
|
Quote: Originally posted by AJKOER ![](images/xpblue/lastpost.gif) | To get into Silver Chemistry, you may which to make Silver acetate from dissolving Ag in a Vinegar/H2O2 solution. As long as the solution remains
acidic, the Silver acetate is soluble. Dilute and the Silver acetate could precipitate (I have made AgC2H3O2, but always kept it dissolved as a path
to other silver salts).
Now, to make more conc Acetic acid, add a slight excess of the AgC2H3O2 precipitate to HCl:
AgC2H3O2 + HCl --> AgCl (s) + CH3COOH
remove the white Silver chloride from your new conc Acetic acid. To prepare HCl, see a recent thread.
No HCl, perhaps the following approach of passing an excess of CO2 into a cold conc AgC2H3O2 solution:
2 AgC2H3O2 + H2O + CO2 --> Ag2CO3 (s) +2 CH3COOH
--------------------------------------------------
Another path, place the AgC2H3O2 in a small amount of water and let it sit in sunlight. My speculation (and it is speculation as the only thing I have
observed is that Silver acetate dissolved in Acetic acid will decompose in modest light in time with the creation of a grey Ag suspension and not
Ag2O):
AgC2H3O2 + H2O --Light--> AgOH (s) + CH3COOH
2 AgOH ---> Ag2O + H2O
So on net:
AgC2H3O2 + H2O --Light--> 1/2 Ag2O (s) + 1/2 H2O + CH3COOH
and even more problematic is that this reaction seems reversible, so may only work in dilute solutions. It may be better to let the solution stand in
light in open air as CO2 could help push the reaction.
[Edited on 1-3-2013 by AJKOER] |
You are having a laugh?
Silver is very expensive and this method is wildly impractical compared with the classical method of calcium hydroxide to make calcium acetate and
then sulphuric acid or solvent stripping and distillation.
Acetic acid can be readily purchased anyway.
It is not controlled and has a myriad of uses such as weedkilling, cleaning, etc. I can buy 25% acetic acid in the hardware section at the
supermarket and 100% acetic acid from a lot of places on the Internet.
|
|
DerAlte
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 779
Registered: 14-5-2007
Location: Erehwon
Member Is Offline
Mood: Disgusted
|
|
DONALD W wrote:
Quote: | Have you ever heard the saying,"call no man a fool", probably not and even if you did, you would most likely not heed the warning.
|
I assume by this you mean some Biblical quote. You should have finished the quote to properly define it, because there are a thousand quotes about
fools. Here are a trio:
Before a man speaks it is always safe to assume that he is a fool. After he speaks, it is seldom necessary to assume it. H. L. Mencken
The wise man does at once what the fool does finally. Niccolo Machiavelli
Fools rush in where angels fear to tread.
Be that as it may, I did not call anyone a fool. My words were: I do not have the patience or inclination to place the above by FTP on the site,
or find the reference here to the subject on this sites (sic) for the lazy or stupid.
We are all lazy and/or stupid from time to time. You do not have to be a fool to qualify.
You must realize, as a member of a few weeks standing, that for old hands who have been hanging around this forum for years, seeing the same old
subjects come up time and time again becomes very tedious. To us it appears lazy to not do a little basic research on the subject in hand. Did you
Google it? Has it been discussed previously in SM?
Re stupid, I am assuming anyone capable of posting coherently here is also capable of using a search engine. Admittedly the search engine on SM is
not a sophisticated one, but it will show a lot if presented with “acetic acid”. Try it. A five minute search gave me the following (I did not
read any,however):
http://www.sciencemadness.org/talk/viewthread.php?tid=19698&...
http://www.sciencemadness.org/talk/viewthread.php?tid=17976&...
http://www.sciencemadness.org/talk/viewthread.php?tid=13818&...
http://www.sciencemadness.org/talk/viewthread.php?tid=2194&a...
http://www.sciencemadness.org/talk/viewthread.php?tid=12261&...
http://www.sciencemadness.org/talk/viewthread.php?tid=9155&a...
http://www.sciencemadness.org/talk/viewthread.php?tid=8794&a...
http://www.sciencemadness.org/talk/viewthread.php?tid=7775&a...
http://www.sciencemadness.org/talk/viewthread.php?tid=6824&a...
http://www.sciencemadness.org/talk/viewthread.php?tid=5528&a...
http://www.sciencemadness.org/talk/viewthread.php?tid=5528&a...
http://www.sciencemadness.org/talk/viewthread.php?tid=4498&a...
http://www.sciencemadness.org/talk/viewthread.php?tid=2194&a...
I do not know how many of these are useful. But the very last one, the oldest one, the one mentioned by Magpie in this thread, is probably the very
best. Seek and ye shall find!
I guess this a plea that all new members read The SM Guidelines by our erudite and illustrious Nicodem : http://www.sciencemadness.org/talk/viewthread.php?tid=19143, preferably before rushing into posting. Read and digest.
There are no rules here. The forum is 10 years old and has accumulated an enormous number of postings and repetition is inevitable. This can be
minimized by adding to existing threads without opening endless new ones on the same topic.
@ Chemistry_Keegan
Please do not feel that this directed at you. It is a general comment. Your question was a perfectly valid one, but might have been better directed to
Short Questions or Beginnings.
@blogfast – I admire your patience in continuing to provide guidance to tyros. If only I had a small shred of that patience!
Apologies to all for an off-topic rant, but I felt it had to be said…
Der Alte
|
|
DerAlte
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 779
Registered: 14-5-2007
Location: Erehwon
Member Is Offline
Mood: Disgusted
|
|
@ScienceSquirrel
Re: You are having a laugh?
AJKOER = anagram of A JOKER - I always get the impression he is speaking tongue-in-cheek or having us on!
Der Alte
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
OK, if you have to go out and buy Silver, yes this may not be your best choice. If you are interested in Silver Chemistry and happen to have some
silver items laying around, go for it!
And yes, I agree, Acetic acid is one item best purchased, but If you enjoy using chemistry, I do find Silver Chemistry fun (most prefer shopping).
I happened to find two Silver candle holders and as my spouse have completely forgotten they existed, and as she doesn't read my threads, I 'recycled'
them. Actually, once you have invested in (or created) silver salts, they can, indeed, be easily recycled. For example, if your final product is AgCl
use NaOH+Sugar (actually glucose from the action of NaOH on the Table Sugar) to get back to Silver. Also, unlike Pb, I am not worried about toxicity
issues.
I read one of your suggested threads. It used Sodium acetate and H2SO4 and then distilled to remove the Na2SO4 impurity and concentrate. I will take my simple, safe and nearly free (once you have may your initial Ag investment)
silver chemistry approach any day. Do you notice that one of my preparations involved photodissociation, how cool is that (most likely impractical by
the way, but still cool).
Now, I do refer to this employment of Ag as Silver Chemistry because it has interesting (and useful at times) differences. For example, adding NaOCl
to a soluble Silver salt forms AgOCl which rapidly, in absence of an excess of Ag2O, creates AgClO3, a chlorate.
3 AgOCl --> 2 AgCl (s) + AgClO3
Now, little known for example, is that AgClO3 is readily decomposed by HCl (and also with time on its own) to AgCl and O2, but with HOCl, my recent
research suggests, the formation of some Chloric acid (cool ). Compare this
preparation to another (albeit, a very bad one) for HClO3, like boiling a Chlorate with H2SO4, and if you avoid the explosion and/or the acid burns
, you deserve an award, perhaps a book on Silver Chemistry .
[Edited on 2-3-2013 by AJKOER]
|
|
Pages:
1
2 |