Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Concentrating Phosphric acid
Steve_hi
Hazard to Others
***




Posts: 196
Registered: 4-12-2010
Member Is Offline

Mood: No Mood

[*] posted on 27-2-2013 at 04:44
Concentrating Phosphric acid


Just bought some concrete etching product. I checked the msds which says 15 - 40%. I'd like to concentrate it to about 85% instead of buying it. Its bp is 314°f would simply boiling it on the stove do the trick or is that too simple
View user's profile View All Posts By User
Mailinmypocket
International Hazard
*****




Posts: 1351
Registered: 12-5-2011
Member Is Offline

Mood: No Mood

[*] posted on 27-2-2013 at 04:52


Quote: Originally posted by Steve_hi  
Just bought some concrete etching product. I checked the msds which says 15 - 40%. I'd like to concentrate it to about 85% instead of buying it. Its bp is 314°f would simply boiling it on the stove do the trick or is that too simple


It looks like slow evaporation or vacuum distillation are the ways to go. I have often heard of it etching glass at high temperatures but this didnt happen to Magpie when vacuum distilled, so I'm not sure anymore. See here:

http://www.sciencemadness.org/talk/viewthread.php?tid=19150
View user's profile View All Posts By User
plante1999
International Hazard
*****




Posts: 1936
Registered: 27-12-2010
Member Is Offline

Mood: Mad as a hatter

[*] posted on 27-2-2013 at 04:54


Is your product only phosphoric acid? or does it contain nitric acid and other stuff?
If not then I guess you could boil down most of the water, much like sulphuric acid.
I already tried something similar, but I heated too much, and ended with a glass.




I never asked for this.
View user's profile View All Posts By User
Steve_hi
Hazard to Others
***




Posts: 196
Registered: 4-12-2010
Member Is Offline

Mood: No Mood

[*] posted on 27-2-2013 at 05:00


The only product listed on the container is phosphoric acid. I originaly bought it to clean out my drip coffee machine which it worked great for. I dont have to wait 20 minutes now for a coffee. I bough it in a gallon container so I'm going to concentrate some of it for lab purposes probably start with one liter so here goes, Ill put it on the stove with the stove hood on.

Thanks for the replies
further search on wicki says a ph of less than 1 ph is about 90% concentration I didn't realize it was already that concentrated so I guess il'l forget boiling it down. It is concrete buster bought at Rona Material if any one is interested it has no coloring or soaping agents in it .

[Edited on 27-2-2013 by Steve_hi]
View user's profile View All Posts By User

  Go To Top