Pages:
1
..
7
8
9
10
11
..
31 |
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I have a few more items that I have found recently:
1000 ml amber wide mouth HDPE Nalgene bottles - brand new - These sell elsewhere for $10 apiece but I have 2 packages of 6 that I will sell for $2 per
bottle or $10 per package of 6 (plus postage). See below
http://www.shopping.com/nalgene-nalgene-amber-bottle-wide-mo... or
http://www.amazon.com/dp/B003OBYV70/ref=biss_dp_t_asn
I also have some white plastic containers with black phenolic screw tops, they are also HDPE, about 40 oz, diameter is 80 mm, height is 130 mm. I
would sell these for $2 each. I believe that they were intended to be secondary containment for shipping small chemical bottles. But they are
great for solids, powders, holding septa or other small parts, nails, screws, etc. They should be OK for liquids, but they are not ideal for them.
I have a few dozen of these.
http://www.berlinpackaging.com/en/products?utf8=%E2%9C%93&am...
[Edited on 26-11-2012 by Dr.Bob]
|
|
chemrox
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
shipping is $198? from Mars?
"When you let the dumbasses vote you end up with populism followed by autocracy and getting back is a bitch." Plato (sort of)
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I am now out of most 24/40 single joint rbfs, still have a few evaporating flasks and a few 3 necks in 24/40. I have one or two coil condensers left
in 24/40, for $25, which I recently found, some addition funnels, and lots of odd adapters, but running out of much in 24/40.
I do still have a number of 14/20 flasks and pieces, which I just updated the inventory of, so if you are interested in 14/20, this is the time to
act, as I am just starting to run out of those in a few larger sizes. But I am out of most of the adapters and condensers needed for a complete kit.
I do still have some adapters and more esoteric pieces. If people want to buy multiples of one flask or a mix of many flasks, I am very willing to
make deals.
I am also running out of crystallizing dishes and beakers, but still have lots of filter flasks, smaller erlenmeyers, and much more. Please see the
attached file for the most current list.
Attachment: Glassware Inventory.xls (64kB) This file has been downloaded 1135 times
[Edited on 28-11-2012 by Dr.Bob]
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Here are most of the rings I have left, from about 2" to 7". They are $5 each.
|
|
thelonious
Harmless
Posts: 13
Registered: 1-5-2012
Location: Toronto
Member Is Offline
Mood: No Mood
|
|
My feedback on Dr.Bob: I've made several purchases with him, and I've got to say, I'm impressed. Not only did he put extra stuff in every shipment,
but he replaced several items for free when they arrived broken! I'm definitely buying from him again in the future.
|
|
7-7-7
Harmless
Posts: 6
Registered: 31-10-2012
Member Is Offline
Mood: No Mood
|
|
Hey Doc are those Nalgene Bottles autoclavable?
I too am very happy with previous order from Dr. Bob
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I am not sure if the Nalgene bottles are autoclavable. I have a few varieties, most of these are made of polypropylene, PP. If the Nalgene site
says that there standard Boston round PP bottles are autoclavable, then I would expect all of these to be as well. If you know that some types are
autoclavable, I can try to find those types in my collection or find a comparable one. But I Googled a couple types of bottles I have had and the
specs say that they can be autoclaved, with the lid loose (so it does not stick shut, I believe).
http://www.usplastic.com/catalog/item.aspx?itemid=23564
http://www.amazon.com/Nalgene-2121-0005-Wide-Mouth-Bottle-Po...
|
|
Glucose Oxidase
Harmless
Posts: 37
Registered: 31-12-2012
Member Is Offline
Mood: Researching Alchemy
|
|
Dr.Bob please explain how the transaction is made (i.e how am i supposed to send you money and how are you supposed to send me the equipments)..
|
|
Hexavalent
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1564
Registered: 29-12-2011
Location: Wales, UK
Member Is Offline
Mood: Pericyclic
|
|
AFAIK, you send him the money online via PayPal, and he, upon receiving your payment, dispatches the items in the mail.
"Success is going from failure to failure without loss of enthusiasm." Winston Churchill
|
|
sinlyn
Harmless
Posts: 1
Registered: 3-1-2013
Member Is Offline
Mood: No Mood
|
|
I might be interested in some of the ground glass labware.
|
|
K12Chemistry
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 63
Registered: 3-1-2013
Member Is Offline
Mood: No Mood
|
|
I would love it if I could get anything!
|
|
Cloner
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 150
Registered: 7-12-2004
Member Is Offline
Mood: apocalyptic
|
|
I have a number of used bunsen burners and bunsen burner tripods as well as mercury thermometers to get rid of. PM me if you are interested.
I am considering to throw away the tripods because they are rusty, the other items can certainly be useful to someone.
|
|
Darkblade48
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 411
Registered: 27-3-2005
Location: Canada
Member Is Offline
Mood: No Mood
|
|
I am curious as to shipping to Canada. What options are available?
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I have shipped a number of items to Canada. For packages less than 4 pounds, it is pretty easy, simple customs with no issues so far, and costs
about $16-20 for 4 pounds. For packages over that, it gets more expensive per pound until it is over about 10 or 12 pounds, plus there is more
paperwork and customs possible issues, although most people have not reported any serious delays (usually under a month).
My main issue is that they are rough on packages during this handling, so that adds to the problem, and there is no practical insurance for
international mail, so either I have to charge a little extra for that risk and replace what breaks for free (self insured), which I have done, or you
have to accept that some items may break, which I try to avoid.
For example, I had one person who wanted a large order of large fragile items, but wanted to keep the shipping very low, so I tried to pack things in
as few boxes as possible to keep the overall costs down, and several items of a large order were broken, due to visibly rough handling (dents in
boxes). So I replaced about half of the broken glass for free, but that is not a good option for anyone. So the best solution is to mostly buy
smaller things or less fragile stuff, as they are easy to ship internationally, or be willing to pay to cost for well padded and packed items.
I need to update the list and report, I'll do that this weekend if I can. I have sold a lot of stuff in the lat month, so a few more items are
running out.
[Edited on 11-1-2013 by Dr.Bob]
|
|
Darkblade48
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 411
Registered: 27-3-2005
Location: Canada
Member Is Offline
Mood: No Mood
|
|
Hmm, I'll take a look through the list again; there were definitely some items that I was interested in.
I take the previous spreadsheet was the latest up to date stock you still have?
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Here is a more recent list. I have run out of a few more items, such as 500 ml grad cyl, 1000 ml 3 necks flasks, and a few crystallizing dishes.
But there is still a lot left. Here is the latest list. I also have a couple of Corning PC-320 stirring hotplates I just found that work OK, but
are a bit dirty. I am asking $90 for each.
![DSCN1330 PC 320 B small.JPG - 62kB](https://www.sciencemadness.org/whisper/files.php?pid=272274&aid=21974)
Attachment: Glassware Inventory.xls (68kB) This file has been downloaded 807 times
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Just found 2 more 2L sep funnels with Teflon stopcocks BUT the drip tips are broken off most or all of the way. They would be $40, due to the
damage. Otherwise they are good condition, with stopper and stopcock.
Also just found more new 4 and 8 ml vials in packages of 144, with black phenolic caps with rubber liners.
I also keep finding more small volumetric flasks, I have lots from 2 to 25 ml, and a few larger ones left as well.
Thanks to everyone for their help finding this glassware a home.
|
|
D-glucose
Harmless
Posts: 12
Registered: 15-12-2012
Member Is Offline
Mood: No Mood
|
|
do you have any scintillation vials?
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I have a bag full of plastic scint vials (maybe about 100), Anyone, make me an offer. I have a few loose glass ones, but I don't think I have any
boxes of 100 left, although I am not sure. I do have some other 4 and 6 dram glass vials (16 and 24 ml) left with black phenolic caps, I need to
create pricing for them, I just found more, and haven't priced them yet.
|
|
D-glucose
Harmless
Posts: 12
Registered: 15-12-2012
Member Is Offline
Mood: No Mood
|
|
ok, thank you.
|
|
smaerd
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1262
Registered: 23-1-2010
Member Is Offline
Mood: hmm...
|
|
Thanks again Dr. Bob! Had another order, probably my 6th, and all I have to say is now is as good of a time to be buying from the guy as ever. Edit -
my home lab wouldn't be nearly what it is today without him. Don't be afraid to ask him things that aren't on the list!
[Edited on 26-1-2013 by smaerd]
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Here are some of the fritted funnels I have left. The sizes range from 15 ml to 350 ml (volume of the top part). I have simple funnels, as well as
14/20 and 24/40 jointed ones. The frits are F, M and C. I have most frit porosity types in most sizes and styles, but not all. These photos DO
NOT include the larger or longer ones, including the ones meant for chromatography, which I am still trying to organize. I have several more boxes
of these available, some of those are dirtier or larger. I also have some smaller buchners, glass frits and other odd pieces, most are listed in the
spreadsheet.
Many of these are Chemglass, some are Pyrex, Ace or other US brands. But most are the same dimensions as shown in the Chemglass specs (see below for
links). No crappy imported ones. Pricing is in the inventory list spreadsheet.
If you want an assortment of sizes or types, I am willing to give a discount on the prices listed in the spreadsheet based on the number wanted. I
even have a couple larger ones still new in the box (for more, of course). If you want better photos, please send me a u2u with an email address
that I can send photos to, or email me at craigslistinnc at gmail.com and I will reply with my real email (get too much spam there).
PS, One note, if you have sent me a note, u2u or request, and I have not gotten back, please remind me. The u2u system is hard to find old messages
in, and I have dozens of conversations going on, so sometimes I am slow to respond, as well as I have lost some messages sometimes.
http://www.chemglass.com/product_view.asp?pnr=CG-1402
http://www.chemglass.com/product_view.asp?pnr=CG-1406
![DSCN1365 frit3.JPG - 117kB](https://www.sciencemadness.org/whisper/files.php?pid=272844&aid=22061)
[Edited on 27-1-2013 by Dr.Bob]
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Here are some 14/20 items left still. First is a small kit of remaining 14/20 dist adapters, accessories, and flasks. Then I have some still
heads, simple medium length condenser head and other bits, a vacuum jacketed dist. head, a smaller head, and a distillation fraction collector (bull
type) for 4 flasks. I can add items to the 14/20 kits if someone is interested but I am running out of many items like simple 14/20 condensers.
Pricing is thus: kit of 14/20 flasks and adapters - $80 including a short path. The 14/20 still heads are $40 and $50 for the 100 or 250 ml size.
The simple medium path is $30, the fritted 14/20 column is $15, the vac jacket dist head is $100, the medium sized head (4th photo) is $60, and the
bull type fraction collector is $40 (w/o flasks, or $50 with 4 rb flasks).
![DSCN1396 14-20 bull.JPG - 93kB](https://www.sciencemadness.org/whisper/files.php?pid=272845&aid=22071)
[Edited on 27-1-2013 by Dr.Bob]
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
That fourth picture!
I was thinking how nice it would be to have one of those... but I already have a standard Liebig, so I'll let someone else have it.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2689
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Here are some odd flasks that I have left for sale.
a) 2 1000 ml 3 necks with center 34/45 joints and side 24/40 joints. Both are worn a bit, the right one has a chip on the center joint. Right one is
$20 left one is $15.
b) 1000 ml rbf w/ 3 29/42 joints - the center joint comes with bonus free 14/20 adapter stuck in it. This would be $10, you might be able to get the
joint out, stopper it, or just use it as is.
c & d) 1000 ml FLAT bottom flask with all 24/40 joints. $20 NOT for vacuum use, but might be OK for gentle heating. Not sure what this is
ideal for, but nearly new condition. Ace Glass brand. c) shows it sitting on its own d) shows bottom view.
e) 1000 ml 3 neck with all 24/40 joints, vertical joints. In good shape, last 1L 3 neck with all 2/40 joints. Ace glass $20
|
|
Pages:
1
..
7
8
9
10
11
..
31 |