| Pages:
1
2 |
metalresearcher
National Hazard
Posts: 758
Registered: 7-9-2010
Member Is Offline
Mood: Reactive
|
|
Preparing elemental fluorine in your home lab ?
No, I am not going to do this. The intermediate product HF is already hazardous enough that I don't want to have this in my home lab.
Many chemists in the 19th century got injured, poisoned or even died while isolating F2, but that was before the fumehood and other safety equipment
got invented. But even with my fumehood, safety equipment I don't do this.
Moreover no glassware can be used so custom made copper or lead tubing / vessels are required.
But are there amateurs who did this successfully in their lab ?
|
|
|
Random
International Hazard
Posts: 1120
Registered: 7-5-2010
Location: In ur closet
Member Is Offline
Mood: Energetic
|
|
I wouldn't be surprised that myfanwy made it or had it in his plans among with carbon monoxide, cyanide and phosgene. He isn't here to tell us about
it though..
I think nickel could be used because it passivates, never really checked about flourine except besides curiosity..seems like something you don't wanna
mess with.
[Edited on 25-11-2012 by Random]
|
|
|
Vargouille
Hazard to Others
Posts: 380
Registered: 16-4-2012
Member Is Offline
Mood: No Mood
|
|
Random is correct in that nickel is used, but steel is used as well because it too passivates with fluorine. For applications above 200C, however,
nickel is required because above 200C, passivated steel will react with fluorine. It's also relatively light and inexpensive compared to the other
metals that passivate with fluorine. There is a chemical route to fluorine, but it requires not only hydrofluoric acid and potassium fluoride, but
also antimony pentafluoride. The electrolytic route is by electrolysis of the bifluoride ion, which requires hydrofluoric acid to produce. According
to Wikipedia, the reaction temperature is between 70 and 120C, and 8-12 V are used for the electrolysis. In short, I doubt many amateur chemists have
produced fluorine.
|
|
|
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
This is a weak statement, I think that
we can safely say: "In short, no amateur chemist has produced fluorine.". Even most professional laboratories do not have the equipment to handle
fluorine in a safe way.
|
|
|
Vargouille
Hazard to Others
Posts: 380
Registered: 16-4-2012
Member Is Offline
Mood: No Mood
|
|
I wouldn't make the claim that no amateur chemist has produced fluorine because it is difficult and dangerous. After all, there are amateur
chemists that make high explosives, phosgene, and cyanide. But it may be an unfalsifiable hypothesis, as obituaries tend not to go into detail.
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
Actually I'm working to make fluorine in my home lab. I almost completed the apparatus, which is made of steel and copper. The anode is carbon and the
cathode is iron. I should use a 1.5 to 1 ratio of hydrofluoric acid/potassium fluoride. This mixture should only melt at 50 degree Celsius. Hydrogen
is liberated in the air but at the anode a copper pipe is used to receive all anodic gases. The copper and carbon anode are isolated by sodium
silicate or teflon.
I also need more fluoride to make the HF needed, I should buy some pretty soon.
I will probably use the fluorine to make cobalt trifluoride or a similar stable fluorinating agent and probably use fluorine or cobalt trifluoride to
passivate nalgene HDPE container.
[Edited on 26-11-2012 by plante1999]
[Edited on 26-11-2012 by plante1999]
I never asked for this.
|
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
oh no, not you plante! Why couldn't it be some other member that I don't really like?
While electrolytic methods are the simplest and most direct, this information may be of interest:
MnF3 decomposes to manganese(II) fluoride above 600°C.
(2)KMnO4 + (2)KF + (10)HF + (3)H2O2 --> (2)K2MnF6 + (8)H2O + (3)O2
(solution is 50% aqueous HF, the potassium fluoromanganate precipitates out)
I am thinking that potassium hexafluoronickelate could probably likewise be prepared in a similar reaction.
At 400°C, a mixture of solid K2NiF6 and KF disproportionates/decomposes to form K3NiF6 and F2. (the reaction is reversible at 250°C).
[Edited on 26-11-2012 by AndersHoveland]
I'm not saying let's go kill all the stupid people...I'm just saying lets remove all the warning labels and let the problem sort itself out.
|
|
|
simba
Hazard to Others
Posts: 175
Registered: 20-5-2011
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Random  | I wouldn't be surprised that myfanwy made it or had it in his plans among with carbon monoxide, cyanide and phosgene. He isn't here to tell us about
it though..
[Edited on 25-11-2012 by Random] |
Is this the same guy who made a video on HCN production and died from phosgene poisoning?
|
|
|
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Yes, it is the same guy. He did great things, but it is really sad that he had to pay this price for his endeavors  How much risk does one want to take?
@plante1999: If you really intend to make fluorine at home, then please take into consideration the risks, not only for you, but also for the people
around you (family in the house, or neighbours). If you want to do this, then you probably need to work on at least a few hundreds of grams scale and
with such amounts there is a great risk of poisoning yourself or people around you.
How do you want to show that you indeed made F2? Are you collecting it in some quartz vessel so that it can be observed?
For me, the making of fluorine, or even the experimenting with concentrated HF is a big step too far. I do not feel sufficiently confident about this.
This is especially true because of the insidious nature of fluorides and in particular HF. Bad warning properties, initially painless destruction of
tissue, that kind of things really scares me. It is quite different from experimenting with e.g. Cl2, Br2, SO2 and so on, because these compounds have
strong smells and have strong warning capabilities.
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
| Quote: Originally posted by woelen |
@plante1999: If you really intend to make fluorine at home, then please take into consideration the risks, not only for you, but also for the people
around you (family in the house, or neighbours). If you want to do this, then you probably need to work on at least a few hundreds of grams scale and
with such amounts there is a great risk of poisoning yourself or people around you.
How do you want to show that you indeed made F2? Are you collecting it in some quartz vessel so that it can be observed?
|
I generaly do my things rather safely. I already worked with anhydrous HF, 9% 40% and I'm not dead as you can see. I'm planning to work on a 100g NaF
basis. There is always risk chemistry, but when you work safely risks are minimal. Color test is not a good test, fluorine is so reactive that it
should be easy to prove its presense by its reaction with iron wool. Such reaction make iron fluorides, which is much less dangerous than the
fluorine.
@Anders: Someone else than me may make a good explanation.
I never asked for this.
|
|
|
kristofvagyok
National Hazard
Posts: 659
Registered: 6-4-2012
Location: Europe
Member Is Offline
Mood: No Mood
|
|
Platinum or special ceramic tubing/vessels should be used, because copper also reacts with F2(:
I have a blog where I post my pictures from my work: http://labphoto.tumblr.com/
-Pictures from chemistry, check it out(:
"You can’t become a chemist and expect to live forever." |
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Plante:
”I should use a 1.5 to 1 ratio of hydrofluoric acid/potassium fluoride.”
You mean anhydrous HF?? How did you obtain or synthesise that?
Frankly, I think what you’re attempting in a home lab is FOLLY. W/o at least a decent fume hood the silliest of mishaps could be extremely
dangerous. You’re not just messing with F2 but with HF too! In a sense I’m very curious to see your exploits but in another sense I just wish you
wouldn’t attempt this… Also, at that ratio your fluorine is likely to be contaminated with HF due to the latter’s volatility and mechanical
entrainment.
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
It passivates copper, if what I've read is correct.
|
|
|
kristofvagyok
National Hazard
Posts: 659
Registered: 6-4-2012
Location: Europe
Member Is Offline
Mood: No Mood
|
|
At normal temperatures yes, but if it bis produced in a copper tube with electrolysis... I wouldn't be in the room.
I have a blog where I post my pictures from my work: http://labphoto.tumblr.com/
-Pictures from chemistry, check it out(:
"You can’t become a chemist and expect to live forever." |
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Me neither, unless the quantities produced are of course really small. I think the HF is more frightening than the F2 though...
[Edited on 26-11-2012 by blogfast25]
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
I already made some anhydrous HF, sulphuric acid reaction with NaF in ironware and subsequent condensation. It was done during a cold day of Canada,
about -30 Celsius. And yes the mixture is 1.5 Anhydrous HF, it make an HF rich potassium bifluoride. Such mixture melt at around 50 degree Celsius and
passivate steel, at room temperature copper passivate effectively to fluorine, Moissant apparatus had some copper part.
After making and manipulating 30ml of Anhydrous HF I am still not dead/poisoned.
I never asked for this.
|
|
|
Eddygp
National Hazard
Posts: 858
Registered: 31-3-2012
Location: University of York, UK
Member Is Offline
Mood: Organometallic
|
|
Just take enough precautions.
there may be bugs in gfind
[ˌɛdidʒiˈpiː] IPA pronunciation for my Username |
|
|
watson.fawkes
International Hazard
Posts: 2793
Registered: 16-8-2008
Member Is Offline
Mood: No Mood
|
|
In the name of good science,
please understand that this explanation, either to others or to yourself, is utterly and completely worthless. Everyone who has never had a fatal
accident with fluorine can claim that they aren't dead. They make this claim in full truth and complete irrelevance.
This is an extreme example, but this class of claim is made around other dangers: "It has never happened to me, therefore it will not happen to me."
Add some ass-covering nuance apparently showing fealty to probability, and you get foolhardiness.
|
|
|
BromicAcid
International Hazard
Posts: 3253
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
A few years back I was thumbing through 'Inorganic Synthesis' a compendium of laboratory techniques and preparations that is completely distinct from
the other 'Inorganic Synthesis' books in our SM library. Anyway, the book contained detailed step by step details on the construction of a fluorine
electrochemical cell down to power source, anode/cathode size, and even what to ask for at the hardware store. I covered a portion of the wealth of
information in this post:
http://www.sciencemadness.org/talk/viewthread.php?tid=2358
So of course it could be done at home.
|
|
|
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
| Quote: Originally posted by plante1999 | | [...]I generaly do my things rather safely. I already worked with anhydrous HF, 9% 40% and I'm not dead as you can see. |
The fact that you are still alive is a very good thing  . But also keep in mind
the risk of slow poisoning. In the past, there have been people who worked a lot with HF and did not die of it, but they had adverse health effects
which made them sick to some extent for the rest of their life. Also consider that. I'm not sure about names of such persons, but one of the great
pioneers on fluorine chemistry also suffered from a lot of health issues after he had done a lot of experimenting with fluorides. His results were
good for science, but he had to pay a high price for these results!
I second to blogfast25 that I am eager to see your results, but please think of your health. Experiments like this are fascinating, but they are not
worth your health. You only have one body and there is no replacement for that!
I do not say that you should quit experimenting with HF, but I do want to warn you. I myself am quite experienced in handling highly volatile toxic
and corrosive compounds (e.g. making and isolating Br2, making and isolating PBr3, making PH3) and have a decent number of chemicals and a nice
collection of equipment, but for me HF (and especially anhydrous HF) is one step too far.
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
I admire your wisdom Woelen and I agree I have only one body. Most of the pioneers in fluorine chemistry had a poisoning from it, but I have the
knowledge they acquired.
I am willing to do the experimentation's so home chemists will have reference for fluorine.
By the way I have handled and made similar volatile toxic corrosive compounds like:
150 ml of homemade bromine.
30ml anhydrous HF
H2S
40 ml of CrO2Cl2
I just don't have the wisdom/fear most of us seams to have here.
I never asked for this.
|
|
|
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Fear is not good at all. If one is led by fear in his hobby, then he'd better quit that hobby.
Wisdom is another matter. I would call it respect for the materials with which you are working. I am not afraid of any chemical, but I do have utter
respect for quite a few of them and HF is one of those, for which my respect goes so far that I do not want to tease it at all. Another one on my NO
GO list is phosgene, COCl2.
Of the four you mentioned above I also made the other three.
Can you tell a little more about your setup, how you handle safety and what plans you have in case something really goes wrong? Maybe others can
comment on that and help you with reducing the risks. With such risky endeavors it alsways is a good idea to have others think about it as well.
|
|
|
Mailinmypocket
International Hazard
Posts: 1351
Registered: 12-5-2011
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by plante1999 | I admire your wisdom Woelen and I agree I have only one body. Most of the pioneers in fluorine chemistry had a poisoning from it, but I have the
knowledge they acquired.
I am willing to do the experimentation's so home chemists will have reference for fluorine.
By the way I have handled and made similar volatile toxic corrosive compounds like:
150 ml of homemade bromine.
30ml anhydrous HF
H2S
40 ml of CrO2Cl2
I just don't have the wisdom/fear most of us seams to have here. |
Just wondering- do you have any specific plans for the fluorine you produce? How will you be storing it for later use (if at all)? I understand
certain metal vessels etc can store it but that only becomes useful if the gas is somewhat pressurized so that you can dispense it as needed. I don't
know if you have seen the old article I posted in the "hydrofluoric acid" thread. There are some nice experiments with HF described in those articles,
which would only give you more practice with gaseous fluorides, they also are quite fun. Especially the experiment making silicon tetrafluoride, which
I did yesterday and plan to continue because it is such an interesting material that doesn't wreck your glass!
Anyhow just be careful and report on your results! 
|
|
|
Davin
Harmless
Posts: 36
Registered: 5-12-2012
Member Is Offline
Mood: No Mood
|
|
KMnO4 + H2O2 +KF + HF--> K2MnF6 +H2O + O2
K2MnF6 + SbF5-> KSbF6 +MnF4
MnF4 spontaneously decomposes into MnF3 and F2
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Oh G-d, not this again . Trying to make small amounts of F2 at home is silly. And
good luck with obtaining/preparing SbF5!
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
