plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
Looking for platinum wire
This is my last(desperate) attempt to get platinum wire, on ebay wire are too thin or too costly. On internet shop I can only buy 20cm+ which cost a
lot. I'm looking for 4 to 13cm of 0.5mm platinum wire. The wire need to be shipped to Canada. This wire is for electrochemical experiments. Please
send U2U with price to me if you have an offer.
Thanks!!!
[Edited on 20-6-2012 by plante1999]
I never asked for this.
|
|
|
strontiumred
Harmless
Posts: 36
Registered: 6-7-2007
Location: Southern England
Member Is Offline
Mood: Delocalised
|
|
http://www.ebay.co.uk/itm/PLATINUM-metal-wire-99-999-PRICE-p...
OK - It's 0.45mm thickness and not that cheap!
Perhaps also ask Fleaker?
[Edited on 20-6-2012 by strontiumred]
|
|
|
hyfalcon
International Hazard
Posts: 1003
Registered: 29-3-2012
Member Is Offline
Mood: No Mood
|
|
I've bought platinum wire from dealers off ebay. The last person I bought from was wanting any and all old oxygen sensors. Makes me think that that
is his source for platinum. He must be digesting the sensor from around the platinum.
|
|
|
Broken Gears
Hazard to Self
Posts: 96
Registered: 7-8-2005
Location: Northern Europe
Member Is Offline
Mood: No Mood
|
|
I got a small piece of ΓΈ0,45*65mm Pt 99,9% wire. I can send it to Canada for 35 EUR
|
|
|
watson.fawkes
International Hazard
Posts: 2793
Registered: 16-8-2008
Member Is Offline
Mood: No Mood
|
|
I would have to imagine that jewelry suppliers deal with far more platinum wire than chemical suppliers do. Since they deal with more volume, they're
also more likely to sell close to the spot price.
|
|
|
ScienceSquirrel
International Hazard
Posts: 1863
Registered: 18-6-2008
Location: Brittany
Member Is Offline
Mood: Dogs are pets but cats are little furry humans with four feet and self determination! 
|
|
I suspect that a jeweller or jewellery supply houise is the place to go, fo instance;
http://www.esslinger.com/roundwire30gaugeplatinum12piece.asp...
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
Someone made a very good offer and at this time I consider this post as resolved.
thanks to everyone that attempted to help my!
Thanks!!!
[Edited on 20-6-2012 by plante1999]
I never asked for this.
|
|
|
WGTR
National Hazard
Posts: 971
Registered: 29-9-2013
Location: Online
Member Is Offline
Mood: Outline
|
|
Platinum Bar Availability
Considering that platinum is very useful in chemistry, I was interested to see the latest fluctuations in the platinum spot price:
It took a nosedive down to $564/oz, rebounded quickly, and is now slowly hovering close to about $600/oz. If the spot price drops below $600, I may
purchase 1 oz just to have on hand for various experiments. Not much is needed for catalysis anyway, but the bulk metal is needed when making a
robust platinum electrode.
Anyway, I checked my usual online sources...only to discover that every place that sells these metal bars close to spot is completely sold out. The
only (domestic) places that seem to have this available are asking prices close to $1000/oz. There is a narrow spread between the market bid and ask
price right now, only about $5 per oz.
So what gives? Is the low price caused by large players dumping truckloads of platinum on the market, while at the same time there is a shortage of
available bars for small-time buyers?
[Edited on 20-03-18 by WGTR]
|
|
|
elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Quote: Originally posted by WGTR  | Considering that platinum is very useful in chemistry, I was interested to see the latest fluctuations in the platinum spot price:
It took a nosedive down to $564/oz, rebounded quickly, and is now slowly hovering close to about $600/oz. If the spot price drops below $600, I may
purchase 1 oz just to have on hand for various experiments. Not much is needed for catalysis anyway, but the bulk metal is needed when making a
robust platinum electrode.
Anyway, I checked my usual online sources...only to discover that every place that sells these metal bars close to spot is completely sold out. The
only (domestic) places that seem to have this available are asking prices close to $1000/oz. There is a narrow spread between the market bid and ask
price right now, only about $5 per oz.
So what gives? Is the low price caused by large players dumping truckloads of platinum on the market, while at the same time there is a shortage of
available bars for small-time buyers?
[Edited on 20-03-18 by WGTR] |
Most bullion sellers I've seen sell above spot and buy below spot to ensure they profit. Bars might not be your best bet for a platinum source - I
remember when I looked into this last time I found the Nugget King's online store sold platinum nuggets for fairly cheap. Maybe look there?
[Edited on 3/19/2020 by elementcollector1]
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
|
j_sum1
Administrator
Posts: 6335
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Contact draculic acid.
|
|
|
draculic acid69
International Hazard
Posts: 1371
Registered: 2-8-2018
Member Is Offline
|
|
Thanks jsum1 I've already sent a pm.
|
|
|
Heptylene
Hazard to Others
Posts: 319
Registered: 22-10-2016
Member Is Offline
Mood: No Mood
|
|
I got some Pt + 6% Rh thermocouple wire from ebay a while ago. It was sold at the spot price of the metals, so I jumped on it. The downsides is there
is rhodium inside, but it's useful as an inert electrode. It was used to make very high temperature thermocouples, so maybe look for thermocouple wire
suppliers?
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
