Chemistry Outreach
Harmless
Posts: 2
Registered: 26-3-2012
Member Is Offline
Mood: No Mood
|
|
Reaction Ideas
Dear all,
I'm affiliated with the School of Chemistry at the University of Southampton.
What I'm particularly interested in is obtaining some idea of the kinds of reactions (synthesis or otherwise) that you might be interested in seeing
put up on Youtube.
If anyone has any suggestions, please don't hesitate to post them up/ message me and if we get the go-ahead, they'll be uploaded soon.
Thanks in advance!
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
Here is one:
http://www.youtube.com/watch?v=gHgyn-wsxFw&list=UUIgKGGJ...
https://www.sciencemadness.org/whisper/viewthread.php?tid=14...
Elemental potassium is made using magnesium powder as the reducing agent. The interesting thing is that magnesium is usually considered to be a
less reactive (and weaker reducing agent) than potassium.
You could show a demonstration showing that sulfur is a stronger oxidizing agent than iodine, but then add water and the reaction reverses itself:
http://www.sciencemadness.org/talk/viewthread.php?tid=17604
Or making nitrosyl perchlorate:
http://www.sciencemadness.org/talk/viewthread.php?tid=196
Or if explosives are acceptable, you might try this idea for an interesting possible reaction:
http://www.sciencemadness.org/talk/viewthread.php?tid=19106
(RDX is not really dangerous to make, it is not very sensitive)
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
I think an interesting reaction would be to demonstrate the power of UV light to move the reaction of H2 and Cl2 forward.
http://www.youtube.com/watch?v=NN82GoBG98s
On ignition with a Mg strip:
http://www.youtube.com/watch?v=S0eKJZKfMBg
A reaction that I (and perhaps others interested in alternative fuels for our cars) would find interesting involves bringing NH3 (a suggested
alternative fuel with unfortunately lower power than conventional gas) together with Dichlorine Mono-oxide (caution: Cl2O is more toxic than Chlorine
and is mildly explosive upon exposure to sunlight, organic compounds, shock and heat). The combination may have the power approaching some
conventional employed fuels and requires no ignition mechanism as the gases explode on contact. The exhaust product is potentially recyclable.
The reaction is interesting in the relative amounts of ammonia consumed (or, Cl2O required):
3 Cl2O + 10 NH3 --> 6 NH4Cl + 2 N2 + 3 H2O
Or, with less NH3 available, I would expect:
3 Cl2O + 4 NH3 --> 6 HCl + 2 N2 + 3 H2O
Or, even less:
3 Cl2O + 2 NH3 --> 3 Cl2 + N2 + 3 H2O
as compared to:
3 O2 + 4 NH3 --> 2 N2 + 6 H2O
One method to prepare Cl2O is to add anhydrous Ca(NO3)2 to concentrated Hypochlorous acid (HOCl) thereby extracting water and liberating Cl2O gas as:
Cl2O + H2O <---> 2 HOCl
There are Patents that you can find on the preparation of concentrated HOCl.
[Edited on 27-3-2012 by AJKOER]
|
|
Hexavalent
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1564
Registered: 29-12-2011
Location: Wales, UK
Member Is Offline
Mood: Pericyclic
|
|
I would quite like to see, if possible, lab syntheses of common pharmaceuticals such as, for example, N-(4-hydroxyphenyl)ethanamide (paracetamol)
etc., perhaps even from fairly common lab reagents if possible.
Structure of paracetamol, for everybody's reference;
![](http://upload.wikimedia.org/wikipedia/commons/2/29/Paracetamol-skeletal.svg)
[Edited on 27-3-2012 by Hexavalent]
"Success is going from failure to failure without loss of enthusiasm." Winston Churchill
|
|
DJF90
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2266
Registered: 15-12-2007
Location: At the bench
Member Is Offline
Mood: No Mood
|
|
There are plenty of pharmaceuticals that one could make at home if you're interested Hexavalent. Aspirin is the common A-Level synthesis in the UK, as
is methyl salicylate (oil of wintergreen) but it isnt much of a far push to make paracetamol if you wish to - the hardest part is obtaining benzene or
nitrobenzene to start with, the latter of which is reduced with Zinc and acetic acid (TLC to prevent over-reduction - I have details if you want),
treatment of the resulting N-phenylhydroxylamine with acid to effect the Bamberger rearrangement (giving p-aminophenol) and finally acetylation
affords paracetamol (this latter step requires acetic anhydride but anilines can be acetylated a more "green" way - I'm sure you'll find something
agreeable if you search. A racemic preparation of ibuprofen is a little more tricky and reagent intensive but possible.
I have a digital copy detailing preparation of active ingredients in pharmacueticals (its quite old...) and I'm sure it could be dug out and emailed
to you if you'd bother to check your U2U sometime.
|
|
GreenD
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 623
Registered: 30-3-2011
Member Is Offline
Mood: Not really high anymore
|
|
extract eugenol from eugenol with pressurized (liquid) CO2! Nobody seems to know how easy this is.
ʃ Ψ*Ψ
Keepin' it real.
Check out my new collaborated site: MNMLimpact.com
|
|
DJF90
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2266
Registered: 15-12-2007
Location: At the bench
Member Is Offline
Mood: No Mood
|
|
You mean eugenol from cloves with supercritical CO2? This is how alot of coffee is decaffeinated these days, being green and all..
|
|
Hexavalent
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1564
Registered: 29-12-2011
Location: Wales, UK
Member Is Offline
Mood: Pericyclic
|
|
It is also used as concerns arise about the use of organic solvents with food and drink, such as DCM.
"Success is going from failure to failure without loss of enthusiasm." Winston Churchill
|
|
Chemistry Outreach
Harmless
Posts: 2
Registered: 26-3-2012
Member Is Offline
Mood: No Mood
|
|
There's a small selection of videos (including small-scale scCO2 extraction) on our current youtube: http://www.youtube.com/watch?v=o2aIUemy9Xw
I'll get these ideas checked out as soon as possible and hopefully get some stuff uploaded soon! Please keep the ideas coming.
|
|
neptunium
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 987
Registered: 12-12-2011
Location: between Uranium and Plutonium
Member Is Offline
|
|
i`d like to see the isolation of hard to get elements like white phosphorus (in large quantities) or Thallium and of course F2...
[Edited on 28-3-2012 by neptunium]
|
|
phlogiston
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
I would also enjoy isolation of certain elements. F2, in particular.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
Reaction of dry ozone with chlorine dioxide. It should form oily red droplets of dichlorine hexoxide.
(ClO2 can be made by passing chlorine gas into sodium chlorite solution)
It is important that both reactant gases be completely free from moisture, otherwise only perchloric acid would form.
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by AndersHoveland ![](images/xpblue/lastpost.gif) | Reaction of dry ozone with chlorine dioxide. It should form oily red droplets of dichlorine hexoxide.
(ClO2 can be made by passing chlorine gas into sodium chlorite solution)
It is important that both reactant gases be completely free from moisture, otherwise only perchloric acid would form. |
Per Wikipedia:
"High purity chlorine dioxide gas (7.7% in air or nitrogen) can be produced by the Gas:Solid method, which reacts dilute chlorine gas with solid
sodium chlorite.
2 NaClO2 + Cl2 → 2 ClO2 + 2 NaCl"
So, since the ClO2 should be dry, perhaps the Gas:Solid method is better starting point for the preparation of the dry ClO2.
|
|
Nicodem
Super Moderator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by DJF90 ![](images/xpblue/lastpost.gif) | There are plenty of pharmaceuticals that one could make at home if you're interested Hexavalent. Aspirin is the common A-Level synthesis in the UK, as
is methyl salicylate (oil of wintergreen) but it isnt much of a far push to make paracetamol if you wish to - the hardest part is obtaining benzene or
nitrobenzene to start with, the latter of which is reduced with Zinc and acetic acid (TLC to prevent over-reduction - I have details if you want),
treatment of the resulting N-phenylhydroxylamine with acid to effect the Bamberger rearrangement (giving p-aminophenol) and finally acetylation
affords paracetamol (this latter step requires acetic anhydride but anilines can be acetylated a more "green" way - I'm sure you'll find something
agreeable if you search. |
A joke-reaction would be the synthesis of paracetamol from aspirin! It is a totally viable reaction, because aspirin can be used for the
N-acetylatation of p-aminophenol:
https://www.sciencemadness.org/whisper/viewthread.php?tid=11...
(a bit kewlish perhaps, but those with some sense of irony would appreciate such an experiment)
…there is a human touch of the cultist “believer” in every theorist that he must struggle against as being
unworthy of the scientist. Some of the greatest men of science have publicly repudiated a theory which earlier they hotly defended. In this lies their
scientific temper, not in the scientific defense of the theory. - Weston La Barre (Ghost Dance, 1972)
Read the The ScienceMadness Guidelines!
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by AJKOER ![](images/xpblue/lastpost.gif) |
A reaction that I (and perhaps others interested in alternative fuels for our cars) would find interesting involves bringing NH3 (a suggested
alternative fuel with unfortunately lower power than conventional gas) together with Dichlorine Mono-oxide (caution: Cl2O is more toxic than Chlorine
and is mildly explosive upon exposure to sunlight, organic compounds, shock and heat). The combination may have the power approaching some
conventional employed fuels and requires no ignition mechanism as the gases explode on contact. The exhaust product is potentially recyclable.
The reaction is interesting in the relative amounts of ammonia consumed (or, Cl2O required):
.......................
Or, even less:
3 Cl2O + 2 NH3 --> 3 Cl2 + N2 + 3 H2O
as compared to:
3 O2 + 4 NH3 --> 2 N2 + 6 H2O
|
I thought I should add an energy generated by combustion comment. If ones rewrites the last equation quoted above as:
1.5 O2 + 2 NH3 --> N2 + 3 H2O
then the energy released difference between these two reactions is simply the energy produced by the decomposition of 3 moles of Cl2O. This, per my
calculations, translates to an increase over the pure oxygen combustion of ammonia reaction by some 31%. Also, one could add a further excess of Cl2O,
say 1 mole, and then the reaction produces an energy increase of 42%, 2 moles 52%, 3 moles 63%,...
On the recycling comment, exiting Cl2 can be passed over heated NaOH or Na2CO3 to form more Cl2O, which is then condensed into HOCl (to supply Cl2O).
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
You could dissolve gold with a mixture of highly concentrated sulfuric and nitric acids. After all the gold has "disappeared", the dissolved gold in
the acid can be transfered and diluted into water, whereupon the gold will reappear back in metallic form! This is much more interesting than aqua
regia.
http://www.sciencemadness.org/talk/viewthread.php?tid=17164
(see the thread "dissolving gold in nitric/sulfuric acids")
|
|
Eddygp
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 858
Registered: 31-3-2012
Location: University of York, UK
Member Is Offline
Mood: Organometallic
|
|
Making salt out of sugar!
3NaClO4 + C6H12O6 = 6H2O + 6CO2 + 3NaCl
EDIT: In aqueous solution
[Edited on 1-2012-4 by Eddygp]
|
|
annaandherdad
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 387
Registered: 17-9-2011
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Chemistry Outreach ![](images/xpblue/lastpost.gif) | Dear all,
I'm affiliated with the School of Chemistry at the University of Southampton.
What I'm particularly interested in is obtaining some idea of the kinds of reactions (synthesis or otherwise) that you might be interested in seeing
put up on Youtube.
If anyone has any suggestions, please don't hesitate to post them up/ message me and if we get the go-ahead, they'll be uploaded soon.
Thanks in advance! |
It depends on what kind of audience you're trying to reach. Most of the suggestions I see here would be for a more sophisticated audience. Are you
trying to reach high school kids? College students? Amateur chemists?
Any other SF Bay chemists?
|
|
Eddygp
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 858
Registered: 31-3-2012
Location: University of York, UK
Member Is Offline
Mood: Organometallic
|
|
2Na + Cl2 = 2NaCl
'Activate' the reaction by adding a drop of water on the sodium in a chlorine athmosphere.
|
|