Crux Australis
Harmless
Posts: 1
Registered: 17-3-2012
Member Is Offline
Mood: No Mood
|
|
Cleaning CRT monitors
I'm trying to clean the grey coating - frit - from old CRT monitors, inside and out. I've found that alcohols (particularly methanol) clean it best,
but it needs to be scrubbed quite vigourously. I'd really like a method which will dissolve the frit (which contains mostly PbO, but also may contain
traces of mercury and cadmium) without scrubbing, so that I can automate the process and reclaim the chemicals for recycling. Anyone have any ideas or
experience in this?
|
|
|
watson.fawkes
International Hazard
Posts: 2793
Registered: 16-8-2008
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Crux Australis  | | I'm trying to clean the grey coating - frit - from old CRT monitors, inside and out. I've found that alcohols (particularly methanol) clean it best,
but it needs to be scrubbed quite vigourously. I'd really like a method which will dissolve the frit (which contains mostly PbO, but also may contain
traces of mercury and cadmium) without scrubbing, so that I can automate the process and reclaim the chemicals for recycling. Anyone have any ideas or
experience in this? |
Idea: Acetic acid should dissolve your mixed PbO. I don't know how fast, though.
|
|
|
Rosco Bodine
Banned
Posts: 6370
Registered: 29-9-2004
Member Is Offline
Mood: analytical
|
|
Nitric acid or aqua regia are candidates, and methane sulfonic acid and sulphamic acids could be useful also.
|
|
|
marko
Harmless
Posts: 21
Registered: 18-2-2012
Member Is Offline
Mood: No Mood
|
|
The grey coating is aquadag (pretty much straight graphite).
|
|
|
neptunium
National Hazard
Posts: 990
Registered: 12-12-2011
Location: between Uranium and Plutonium
Member Is Offline
|
|
the inside also contain some rare earth oxides and aluminum fine powder HCl should take care of that
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
