ScienceHideout
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 391
Registered: 12-3-2011
Location: In the Source
Member Is Offline
Mood: High Spin
|
|
Calibration Help!
Good News- Tomorrow my family and I celebrate Christmas and I am about 95% sure that my family got me an Ohaus SPE-123 milligram balance.
Bad News- I now have the knowledge that Ohaus doesn't include the weight with the balance. I would refuse to operate a nice expensive milligram balance unless it is accurate and precise within a milligram!
I'd like to know if there is any good ghetto way to calibrate a balance to hold me over until I can get a weight. Is there anything you find that
always equalls 100 grams? My original idea was to get paper and cut a piece that weighs 100g, but... that would be a lot of paper. I also know US
nickels weigh 5g, but it can differ depending how used they are. I also considered calibrating with 100mL of water, but I can't tare the mass of the
beaker (and my 100mL volumetric flask is cheap...)...
Any ideas that can actually work? Thnks in advance!
hey, if you are reading this, I can't U2U, but you are always welcome to send me an email!
|
|
Mr. Wizard
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1042
Registered: 30-3-2003
Member Is Offline
Mood: No Mood
|
|
You could ask a high school or college lab to weigh an item your bring in, such as a nickel dime, quarter and half dollar. Clean the coins before you
bring them in so it won't be contaminated with perspiration and oils. Handle them with clean plastic tongs after cleaning. Keep the 'standards' in a
dry plastic container with the actual weights marked on the container. Plan B would be to buy some standards.
|
|
MagicJigPipe
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
I'm jealous. No one in my family would ever have the ... for lack of a better term ... "knowhow" to select such an instrument for me.
Or, now that I've looked it up, the money!
There's nothing you're going to find that will give you exact weights down to the milligram (other than standards, of course). Even lightly used
nickels (still bright and shiney, from 2011) seem to vary by at least a few tenths of a milligram to a couple of milligrams. That didn't make sense
to me but, unless the balance I was using was crap, which is possible, it is supported by actual measurements.
Even if you could make accurate water measurements down to the microliter, this wouldn't be reliable as the purity of the water would effect the
density (not to mention the temperature to a smaller extent). Just use nickels for now. It will be close enough for most things (unless you're
making drugs and ingesting them I guess; and even then...).
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
grndpndr
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 508
Registered: 9-7-2006
Member Is Offline
Mood: No Mood
|
|
If you know a fella who reloads for his firearms,the projectiles (bullets) he uses are likely quite accurately made wieghed/consistent.If you could
get hold of match grade bullet(s) the accuracy would be to the grain.Also most major US manufacturers hold thier std grade of firearms projectiles to
within a few grains.IIRC a box of 100 std grade
Rifle bullets varyed by no more than 2-3 grains with the very careful or anal reloader seperating them by wieght.
Recall 1gram is equivalent to 15.43 grains.In fact I used to/still do, use my reloading scale to measue subgram wieghts as most
powder/reloading scales are accurate to a grain.
Sounds like youll have a nice present from Santa.Merry Christmas
[Edited on 24-12-2011 by grndpndr]
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2690
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Paper would be a bad choice, as it absorbs humidity from the air and changes weight constantly. It is fine for comparing paper areas, like for GC,
where there is a relative weight needed, but for an absolute reference, paper would not work well. Even a simple paper label for a 4 ml vial will
change weight by up to 1 mg with a change in humidity.
You should find a large metal object or two, weight it on a fine balance somewhere else (or even two of them, which will show you how much even good
balances can vary) and then record that weight. That should be fine for a reference. Some items about 10 grams and 100 grams are good starting
points, and you can find them with the new balance. I have also seen calibration weight sets for sale at many places, both new and used, including
at coin shops.
|
|
ScienceHideout
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 391
Registered: 12-3-2011
Location: In the Source
Member Is Offline
Mood: High Spin
|
|
Think I could take it to a gun or jewelry store and ask them to calibrate it for me? But then it suffers changes the ride home... I hate gravity...
hey, if you are reading this, I can't U2U, but you are always welcome to send me an email!
|
|
ScienceHideout
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 391
Registered: 12-3-2011
Location: In the Source
Member Is Offline
Mood: High Spin
|
|
Well, luckily my scale came with a calibration weight. It is a wonderful scale- highly reccomend it for anyone who still uses those decigram drug
dealer scales (like I used up till... um... yesterday!). The draft shield works great. It is very professional, but has a cute and modern design.![:)](./images/smilies/smile.gif)
Lolz... I have to post some nerd porn of it... ![:)](./images/smilies/smile.gif)
Now I can officially brag that I have one of the best scales on this forum (Although I am behind that one member that has that 0.00001 g balance...
who was that?).lolz, I won't brag... that is rude... But if you want a good price for this scale, my parents ordered it from ITIN SCALE, in NY.
Merry Christmas, everyone!
hey, if you are reading this, I can't U2U, but you are always welcome to send me an email!
|
|
MagicJigPipe
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
That's great. I wouldn't say it is the best scale on the forum. Many of us have analytical balances which typically have precisions of no less than
+/- 0.0002 g. (these things, when new, are thousands of dollars).
Still, you have a nice gift there. Take care of it.
A 1984 U.S. Nickel:
![U.S. Nickel (1984).jpg - 40kB](https://www.sciencemadness.org/whisper/files.php?pid=231007&aid=16919)
It's dark and flash doesn't work well and I didn't feel like spending a bunch of time on the "perfect shot". But, that's to give you an idea of how
much is "rubbed off" of a nickel after 27-28 years. Not much, huh?
Find a 1984 nickel and see what your balance says... I'm curious.
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
ScienceHideout
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 391
Registered: 12-3-2011
Location: In the Source
Member Is Offline
Mood: High Spin
|
|
Mine shows 5.010, but it could be minor differences in the coin and where it was minted at.
hey, if you are reading this, I can't U2U, but you are always welcome to send me an email!
|
|
franklyn
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 30-5-2006
Location: Da Big Apple
Member Is Offline
Mood: No Mood
|
|
A trick that is useful ( after you have accurately calibrated your scale ) is to weigh
the scale itself by placing it upside down on a pedestal near the edge of a table to
read the result from underneath. Thereafter this will provide a bench mark you can
always use , providing that the same brand of batteries are used.
- Official coin weights -
http://www.usmint.gov/faqs/circulating_coins/index.cfm?flash...
- Observations found online regarding coins ,
the PENNY weighs 2.5 gm , four new ones accurately weigh 10 gm.
the NICKEL weighs 5.0 gm, 20 new ones accurately weigh 100 gm.
since there are 453.6 gm/ lb
182 pennies ($1.82) are 455 gm (~ pound )
91 NICKELS ( $4.55)(1.0 gm/ cent ) are 455 gm (~ pound )
DIMES, QUARTERS, 1/2 DOLLARS are all worth $20/ lb
" A nickel can weight from between 4.9 and 5.1 grams (weighed a bunch) (heard of
4.8 to 4.85 but only was able to replicate with heavily used nickels or thousands
decimal place scales even then bout 70 percent of the time they were between
4.9 and 5.1) (depends on the wear, if you wanted to do a real locked down test
you could go to the bank and get a fresh from the press new roll of nickels or
pennies for that matter) If your scale weights within that range I would say the
scale is accurate to the hundredths decimal place."
.
|
|
Panache
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1290
Registered: 18-10-2007
Member Is Offline
Mood: Instead of being my deliverance, she had a resemblance to a Kat named Frankenstein
|
|
Perhaps you could weigh a pie to calibrate it, somewhere over the rainbow. Nice gift btw, and to think of all the other possible gifts you could have
been granted in its stead, such as a huge pillow made of feathers, a really huge pillow.
|
|