itchyfruit
Hazard to Others
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
Silver nitrate stain removal
Hi
Does anyone here have any tips on removing Silver nitrate stains from kitchen worktop/vinyl flooring?
I was thinking dilute Nitric acid, but have some concerns about damaging the worktop/floor.
Google came up with treating first with Potassium permanganate solution and then Sodium bisulphite solution, Ammonia apparently works, but sounds a
little dangerous.
|
|
|
mr.crow
National Hazard
Posts: 884
Registered: 9-9-2009
Location: Canada
Member Is Offline
Mood: 0xFF
|
|
KMnO4 will make an even worse stain
Ammonia sounds like your best bet for dissolving silver ions. Why is it dangerous? Get some household ammonia for cleaning floors and open the window
Double, double toil and trouble; Fire burn, and caldron bubble
|
|
|
itchyfruit
Hazard to Others
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
Ammonia it is then. Cheers
|
|
|
lavenatti
Harmless
Posts: 17
Registered: 19-12-2006
Member Is Offline
Mood: No Mood
|
|
I've had some success with Sodium Thiosulfate.
|
|
|
Arthur Dent
National Hazard
Posts: 553
Registered: 22-10-2010
Member Is Offline
Mood: entropic
|
|
Depends all on the surface. For synthetic surfaces that are normally resistant to acid, a dilute solution of Nitric acid and Hydrochloric acid poured
dropwise in situ should do the trick. four drops of water, then one drop of Nitric acid, followed by three drops of Hydrochloric acid.
This dilute Aqua Regia solution should attack the metallic ions efficiently, while leaving vinyl/linoleum relatively intact. There may be some
discoloration so try it on a hidden spot before proceeding.
You'll have to balance between choosing the original stain, or the discoloration that may be left, which one looks worse...
Robert
PS.: I would use this on wood surfaces, or granite/marble surfaces. I guess glazed ceramic tiles would be ok.
[Edited on 8-12-2011 by Arthur Dent]
--- Art is making something out of nothing and selling it. - Frank Zappa ---
|
|
|
unionised
International Hazard
Posts: 5126
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Ho Hum.
The stains are not due to silver ions (which are colourless).
They are due to metallic silver.
To dissolve that you need to oxidise it.
Potassium permanganate is a good oxidant, but it tends to stain things because it leaves MnO2 behind.
MnO2 will dissolve in bisulphite.
The nature of the stained surface limits what you can use to clean it (obviously).
Dilute nitric acid may not attack the vinyl floor too badly, but it would be a good idea to try an inconspicuous corner first.
|
|
|
Bidentate
Harmless
Posts: 2
Registered: 18-2-2015
Member Is Offline
Mood: No Mood
|
|
Hi all - new user.
I got up this morning and noticed brownish-black streaks all across a worktop. After a couple of red herrings, I realised that it was caused by silver
nitrate (I had transferred it to a smaller container yesterday). I must have spilled a little and then wiped the surface, smearing it everywhere.
After reading this thread, I tried a combination which seems to have worked perfectly. I made a paste in a pestle and mortar of sodium percarbonate
and 890 ammonia and scrubbed the worktop with it. NB You need very good ventilation if you don't want to be overcome by the ammonia
fumes. The "theory" behind it, is that the percarbonate is an oxidant (it is an adduct of sodium carbonate and hydrogen peroxide) and should
oxidise the metallic silver to the Ag+ ion. This then forms a soluble complex ion with the ammonia -
[Ag(NH3)2]+, which can easily be washed away.
It is possible that (a) it would have worked with more dilute ammonia (safer, but possibly slower) and (b) that hydrogen peroxide solution might have
worked instead of the percarbonate (but I didn't have any hydrogen peroxide).
I hope that this helps somone in the future,
Gary
|
|
|
Fulmen
International Hazard
Posts: 1716
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
The best I've ever used was potassium cyanide.
Warning: Cyanides are extremely toxic and must not be used without the proper safety precautions.
For these, please read a book. When dealing with dangerous chemicals one should never rely on advice from the Internet.
[Edited on 18-2-15 by Fulmen]
We're not banging rocks together here. We know how to put a man back together.
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Let's bring in a herd of elephants to scare away the lions!
You might want to explain CAREFULLY how KCN is used, and the safety precautions related to such use?
[Edited on 18-2-2015 by Bert]
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
Fulmen
International Hazard
Posts: 1716
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
I know, I know. But it worked like nothing else.
We're not banging rocks together here. We know how to put a man back together.
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Once it's been reduced to elemental silver it's largely question of what's the substrate. Nitric acid would work but not if it damages the worktop.
Quite dilute HNO3 would also work but take a lot of time.
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
You want to leach the silver out. Any known material that leach silver should work in theory.
|
|
|
Fulmen
International Hazard
Posts: 1716
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Bert: Fair point, I've added a disclaimer. I just assumed that anyone in the possession of cyanides would know about the dangers, but one should never
assume when it comes to dangerous chemicals.
To elaborate on this, it was more than 20 years ago when I was still an apprentice. I had a project for a professor, the old-school type, determining
cyanides in spent anodes from aluminum production. So I was given a lab, 100g of KCN and was left to work on my own distilling off cyanides. So at
that time I was already pretty comfortable with cyanides, so when he recommended it to remove a few stains I didn't even flinch. I think I just used a
few grains of salt and a drop of water and rubbed the stains with a tissue. Of course I used nitrile gloves and washed off the bench thoroughly
afterwards, other than that I don't think I took any special precautions.
We're not banging rocks together here. We know how to put a man back together.
|
|
|
Bidentate
Harmless
Posts: 2
Registered: 18-2-2015
Member Is Offline
Mood: No Mood
|
|
Just seen all of the replies!
I think I'd steer clear of cyanides myself (even if I had any). I would have tried nitric acid if I'd had any. I might get some 3% HNO3 as
a general purpose reagent. I wish that the 69% was still legal. I've noticed that "pH Down Grow" is still being advertised by the hydroponics (ha ha)
stores, which is 38% nitric acid, but I can't see how it's legal (unless I've misunderstood the explosive precursors regulations).
Cheers,
Gary
|
|
|
ralphbrown1
Harmless
Posts: 1
Registered: 21-6-2017
Member Is Offline
Mood: No Mood
|
|
Ammonia or Sodium Thiosulfate seems like an good option.
Also potassium cyanide is a great option too but make sure to use safety precautions
|
|
|
Melgar
Anti-Spam Agent
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Quote: Originally posted by ralphbrown1  | Ammonia or Sodium Thiosulfate seems like an good option.
Also potassium cyanide is a great option too but make sure to use safety precautions
|
Ah, you responded to a two year old thread, but because it's your first post, we can cut you some slack.
KCN sort of worked on the bathroom sink, but the stains are just lighter-colored; they're still there. If you're doing silver plating youll probably
have KCN anyway, since it's necessary for that, and you'd probably be familiar with its singular danger: whatever you do, DON'T PUT IT IN ACID! EVER!
As long as you don't do that, or leave it where someone else might somehow get acid on it without knowing what it is, you'll be good. That rule also
extends to stomach acid.
The first step in the process of learning something is admitting that you don't know it already.
I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
|
|
|
Morgan
International Hazard
Posts: 1694
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
"The use of Iodine followed by Sodium thiosulphate to remove stains has been found to work also." Maybe the iodine picks up metallic silver if that's
the culprit.
http://www.techknow.org.uk/wiki/index.php?title=Removal_of_S...
Here it says a strong solution of potassium iodide or alcoholic iodine solution followed by ammonia water.
https://books.google.com/books?id=3-1xAAAAIAAJ&pg=PA427&...
I wonder if this is any good?
https://www.google.com/patents/US3434796
[Edited on 21-6-2017 by Morgan]
|
|
|
AJKOER
Radically Dubious
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
The use of ammonia to address a silver presence I find interesting!
Yes, it works forming a complex ion with ammonia, namely [Ag(NH3)2]+, as was noted above. But let's assume that it was not entirely washed away.
This is where the fun starts. The complex dehydrates and can breakdown into Ag3N and some Ag2NH. The latter silver nitride has a more common name,
'fulminating silver', that anyone who has done silver mirrowing knowns is a terrifying explosive compound to be avoided!
I would think such an event is somewhat rare, but when it does form and explodes, it can be a noteworthy event.
As such, I would not recommend any protocol involving mixing silver (especially a Ag-Ag2O combination) with excess ammonia and allowing to dry in the
presence of an energy source (heat - chemically induced or otherwise, sunlight,...).
See prior comments, research and links at https://www.sciencemadness.org/whisper/viewthread.php?tid=70...
[Edited on 22-6-2017 by AJKOER]
|
|
|
woelen
Super Administrator
Posts: 8012
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
This is no issue in cleaning small patches of skin. The amount of silver in the dark stains is incredibly low. When the stain is removed, most of it
is dissolved and is removed. The amount, remaining in the skin, is so low that there is ZERO risk of explosion.
The risk of explosion indeed is a very real one, when one allows ammoniacal solutions of silver to stand for a longer time. Even a solution with just
a few tenths of percent of silver can form highly explosive crusts. The stains on skin, however, can be 100% safely cleaned with ammonia (at least
from the point of view of risk of explosion, other risks, such as allergic reactions still exist).
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
