Melgar
Anti-Spam Agent
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
How to dry various solvents
I found this page that gives a nice list of drying agents that work with different solvents:
http://delloyd.50megs.com/moreinfo/drying.html
I learned a lot of neat stuff; for example that ethanol can be dried with CaO or MgO, or ether can be dried with CaCl2.
Another interesting page on that site lists which common solvents are miscible with each other:
http://delloyd.50megs.com/moreinfo/immiscible.html
Lots of good information there.
|
|
|
vulture
Forum Gatekeeper
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
It really depends on what your definition of "dry" is. Ether dried over CaCl2 will still contain a detectable amount of water which can interfere with
certain reactions (organometallics, polymerizations).
So use with caution.
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
|
White Yeti
National Hazard
Posts: 816
Registered: 20-7-2011
Location: Asperger's spectrum
Member Is Offline
Mood: delocalized
|
|
Anhydrous calcium sulphate is the best drying agent for most purposes.
|
|
|
rstar
Hazard to Others
Posts: 138
Registered: 22-9-2011
Location: Besides valence shell
Member Is Offline
Mood: Dark
|
|
Phosphorus pentoxide or P2O5 (molecular P4O10) is one of the most powerful drying agents. It can dry dilute H2SO4 to make it concentrated, but if left
for more time it can also dry conc. H2SO4 to its anhydride SO3. 
"A tidy laboratory means a lazy chemist "
- Jöns Jacob Berzelius
|
|
|
ScienceSquirrel
International Hazard
Posts: 1863
Registered: 18-6-2008
Location: Brittany
Member Is Offline
Mood: Dogs are pets but cats are little furry humans with four feet and self determination! 
|
|
It also rips the shit out of most things organic turning into a yucky black gel of phosphoric acid in the process
|
|
|
Chemistry Alchemist
Hazard to Others
Posts: 403
Registered: 2-8-2011
Location: Australia
Member Is Offline
Mood: No Mood
|
|
I also wanted to know how i could dry methanol and i came across this site which has a list of solvents and then the chemicals needed for drying...
http://delloyd.50megs.com/moreinfo/drying.html
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
I'd never heard of this delloyd site before, looks quite interesting going by homepage and a few samples. Is it well known in the USA? Trustworthy?
|
|
|
rstar
Hazard to Others
Posts: 138
Registered: 22-9-2011
Location: Besides valence shell
Member Is Offline
Mood: Dark
|
|
Some volatile solvents can also be dried by passing hot air through them 
"A tidy laboratory means a lazy chemist "
- Jöns Jacob Berzelius
|
|
|
HexJam
Harmless
Posts: 25
Registered: 29-9-2008
Member Is Offline
Mood: Steady
|
|
My favourite drying agent is good ol' CuSO4, it works well and is compatible with a lot of solvents and changes colour when wet - bonus!
|
|
|
Endimion17
International Hazard
Posts: 1468
Registered: 17-7-2011
Location: shores of a solar sea
Member Is Offline
Mood: speeding through time at the rate of 1 second per second
|
|
Quote: Originally posted by HexJam  | | My favourite drying agent is good ol' CuSO4, it works well and is compatible with a lot of solvents and changes colour when wet - bonus! |
Yeah, but it isn't something you'll use in industrial processes that deal with food grade chemicals. That's why ethanol is dried using calcium oxide.
Traces of calcium pose no problems, unlike copper traces.
I'm not sure of the data on that page is that accurate. I see they've put ether and water as immiscible, but that's not true. Ether dissolves in
water, though very little. The solution can be used for weak, primary sedation of certain lab animals that breathe by gas diffusion over the skin.
|
|
|
Lambda-Eyde
National Hazard
Posts: 860
Registered: 20-11-2008
Location: Norway
Member Is Offline
Mood: Cleaved
|
|
| Quote: Originally posted by Endimion17 |
I'm not sure of the data on that page is that accurate. I see they've put ether and water as immiscible, but that's not true. Ether dissolves in
water, though very little. |
If two solvents are miscible, it means that they can be mixed in all proportions - which is not true for water and diethyl ether.
This just in: 95,5 % of the world population lives outside the USA
Please drop by our IRC channel: #sciencemadness @ irc.efnet.org
|
|
|
peach
Bon Vivant
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
I'd love a sodium still, but Chemglass are pretty pricey and their sole UK distributor charges more for the privilidge; and I mean more than the VAT,
duty and shipping.
I have the sodium, benzophenone, vacuum, inert gas, special syringes and desire, but cash is always the enemy.
The delloyd site is great yeah! He's got some other useful tables up on there. And it's funny you should mention it at this moment, because just
yesterday I thought I'd do some more printing and laminating.
I like having physical copies of useful tables so, if I forget something or am not sure, I can whip them out and check it right on the spot.
I've also pulled all of the most common solvents out of the Sigma physical properties database and made a table of their boiling points across the
pressure range, so I can quickly estimate what's going to do what when I do X.
The only current annoyance is them all being in different formats. I have thought about recompiling it all into a simple text document so people can
grab it all in one go, click print, and have a mini-guide to reference. That's competing with me writing up the numerous experiments I've done
recently, but I will attempt to get it done and drop the finished lot up on here.
Lamination is useful, as they'll be hammered by all the weird stuff they get exposed to if not.
{edit}In that pile, there is:
The drying table from delloyd and erowid
The wiki table of densities, BP's and polarities
The flash point of about hundred volatiles
And there's another nomograph on the back of one of them
Azeotropes would also be useful, and IARC's carcinogen reference, and autoignition temperatures.
[Edited on 3-10-2011 by peach]
|
|
|
hkparker
National Hazard
Posts: 601
Registered: 15-10-2010
Location: California, United States
Member Is Offline
Mood: No Mood
|
|
If you want to throw those files up on the FTP I know I would appreciate it peach! I too should make some pages with those useful charts on them.
My YouTube Channel
"Nothing is too wonderful to be true if it be consistent with the laws of nature." -Michael Faraday
|
|
|
Endimion17
International Hazard
Posts: 1468
Registered: 17-7-2011
Location: shores of a solar sea
Member Is Offline
Mood: speeding through time at the rate of 1 second per second
|
|
| Quote: Originally posted by Lambda-Eyde | | Quote: Originally posted by Endimion17 |
I'm not sure of the data on that page is that accurate. I see they've put ether and water as immiscible, but that's not true. Ether dissolves in
water, though very little. |
If two solvents are miscible, it means that they can be mixed in all proportions - which is not true for water and diethyl ether.
|
Oh. Well ok, it's English language. My bad.
|
|
|
peach
Bon Vivant
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by hkparker | | If you want to throw those files up on the FTP I know I would appreciate it peach! I too should make some pages with those useful charts on them.
|
Okay.
I've started copying them all into a single text document, which has thus far taken at least 12 solid hours of staring at the screen, reformatting
tables and so many entries my brain is going numb.
But it should be reasonably well done within the next few days, whereupon I'll list it up for people to have a look at / complain about so I can
correct any errors or reformat things.
I'll start a new thread related specifically to the document, so people have a specific point to come back to if / when they find any errors or to
make suggestions for changes.
I will be STUNNED if there isn't a mistake in one or two of the values, but it's as close as I can get it on the first attempt.
[Edited on 5-10-2011 by peach]
|
|
|
hkparker
National Hazard
Posts: 601
Registered: 15-10-2010
Location: California, United States
Member Is Offline
Mood: No Mood
|
|
Don't work too hard!
But thank you, I really appreciate it  !
My YouTube Channel
"Nothing is too wonderful to be true if it be consistent with the laws of nature." -Michael Faraday
|
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
There's at least one error in the miscibility tables cited in the OP. Has anyone else spotted it?
|
|
|
Nicodem
Super Moderator
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
Other than listing DMF as immiscible with water, I think all the other combinations are correct.
Though it should be kept in mind that "immiscible" here only means that two solvents do not mix in all the composition range, but they can be
quite miscible in borderline ranges. For example, methanol does dissolve substantially in heptane and heptane dissolves substantially in methanol, but
they do not mix in all the possible ratios. Analogously, methyl acetate and water do not mix in all ratios, but they do so freely at the borderline
ranges.
|
|
|
Panache
International Hazard
Posts: 1290
Registered: 18-10-2007
Member Is Offline
Mood: Instead of being my deliverance, she had a resemblance to a Kat named Frankenstein
|
|
I surprised you dorks haven't whipped some code for your iPads to allow for voice prompted data sets to be accessed and read back out to you while
your seventeen reactions are running and you are assigning H1 peaks on yesterday's workups. So inefficient.
Remember that bit in Good Will Hunting where he glances over her NMR homework and jots out the structure in four seconds. I wonder if anyone can
actually do something like that, I don't think so.
Anyway while you guys are down at Kinko's laminating you might have a look at Wolfram.com. I find it the place I go to when the CRC fails, which isn't
very often really. If you're going too invest in a CRC I suggest buying one from the seventies they are best IMHO. They are idiosyncratic however and
require one to become accustomed to them, this can take time.
|
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
"I surprised you dorks haven't whipped some code for your iPads to allow for voice prompted data sets to be accessed and read back out to you while
your seventeen reactions are running and you are assigning H1 peaks on yesterday's workups. So inefficient."
Personally, I just remember the data.
|
|
|
smaerd
International Hazard
Posts: 1262
Registered: 23-1-2010
Member Is Offline
Mood: hmm...
|
|
I recently found an article showing the efficacy of using 3 angstrom molecular sieves, columns of sillica, as well as columns of alumina on drying a
variety of solvents. I found these to be incredibly valuable and figured it would be kind to openly share this information.
Using sodium stills, and distilling from benzophenone isn't really an option for the most of us.
In the first article it mentions using schlenk techniques in a glove-box for the columns of activated alumnia and silica. I was wondering what kind of
work around would work for us?
What I was thinking was running a chromatography column with a drying-tube on-top into a either a two neck flask with an additional drying tube or
just a one neck flask. Obviously having effectively dried the glass-ware prior to working. Would building a dedicated "Dry box", be over-kill? A cheap
hygrometer could help keep things in perspective, granted it won't read down to the low values wanted, but it could be pumped with air sent through
tubes with drying agent in them, or just be lined with dessicant.
The second article is more about aprotic solvents and is a bit older but it holds some relevant information.
Attachment: phpWphOCb (769kB)
This file has been downloaded 359 times
Drying of Organic Solvents: Quantitative Evaluation of the Efficiency of Several desiccants
D. Bradley G. Williams and Michelle Lawton
The Journal of Organic Chemistry 2010 75 (24), 8351-8354
DOI: 10.1021/jo101589h
Attachment: Desiccant efficiency in solvent drying dipolar aprotic solvents.pdf (420kB)
This file has been downloaded 941 times
Desiccant efficiency in solvent drying dipolar aprotic solvents
David R. Burfield and Roger H. Smithers
The Journal of Organic Chemistry 1978 43 (20), 3966-3968
DOI: 10.1021/jo00414a038
[Edited on 18-12-2012 by smaerd]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
