| Pages:
1
2 |
NHZ
Harmless
Posts: 22
Registered: 9-8-2011
Member Is Offline
Mood: No Mood
|
|
Potassium Chlorate & Perchlorate
Hi all, I am new to this forum and been reading much recently but have not found anything really specific to my questions. I am making an electrolysis
cell to produce small amounts of KCLO3 and would then like to convert that into KCLO4 as from what ive read, it is more stable and safer to handle.
I recently purchased some MMO coated titanium mesh and some glassware. I have the P/S and the materials to make the chlorate etc. so I think im
covered in that regard.
I have no background in chemistry, so any advice offered would be greatly appreciated.
My first obstacle is finding a method of converting the chlorate and have found an interesting video on youtube as seen in this link > http://www.youtube.com/watch?v=9YVsEX-ikUQ
In the video it is said that the conversion can be performed using peroxide and alcohol. Does this appear to be correct? and is this procedure
relatively safe?
I have seen a few other methods, but this one seems to be the simple route, though I am not sure how safe it is
Edit:
The video is based on the separation of KCLO3 from matches. What I would like to do is start with KCLO3, not matches.. Any ideas on what volumes to
use? How much 3% peroxide added to XX? grams of KCLO3 mixed with XXml of water?
[Edited on 11-8-2011 by NHZ]
|
|
|
User
Hazard to Others
Posts: 339
Registered: 7-11-2008
Location: Earth
Member Is Offline
Mood: Passionate
|
|
I suggest that you use the search engine, this subject is widely covered.
Also I would recommend to learn some basics before perfoming such rather complex synthesis.
What a fine day for chemistry this is.
|
|
|
NHZ
Harmless
Posts: 22
Registered: 9-8-2011
Member Is Offline
Mood: No Mood
|
|
Well thats just it, I have tried to search and havent found anything regarding this particular method..
I have read several pages looking for this info, but to no avail.
Can you simply outline any potential hazards in this process? My main concern is being safe...
[Edited on 11-8-2011 by NHZ]
[Edited on 11-8-2011 by NHZ]
|
|
|
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I made a miniature chlorate cell with MMO. It works very well:
http://woelen.homescience.net/science/chem/exps/miniature_ch...
|
|
|
NHZ
Harmless
Posts: 22
Registered: 9-8-2011
Member Is Offline
Mood: No Mood
|
|
Thats a well put together writeup and cell, thanks for posting.
I tend to learn hands on, so the more visual reference, the better.
My cell is slightly larger, approx 1L or so, but I like the results you had with such a small vessel.
I have even seen guys making this in plastic yogurt containers..
Any idea if the procedure mentioned in the OP is somewhat safe as well?
I'm not too keen on finding anything out the hard way after some of the stories
ive read and pictures of shattered glass in skin etc..
|
|
|
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
That video is crap. Chlorate does NOT react with peroxide to make perchlorate!
Making perchlorte from chlorate cannot be done with MMO anodes, but it can be done with PbO2 anodes or platinum anodes. Another (more dangerous)
option is to carefully heat perfectly pure KClO3 in a perfectly clean heat resistant glass apparatus until it just melts and then keep the temperature
constant. Slowly the chlorate is converted to perchlorate and chloride. This latter procedure was used in the past as the main method for making
perchlorate, but nowadays it is replaced by electrolysis with PbO2 or platinum anodes, because of safety concerns.
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
| Quote: | That video is crap. Chlorate does NOT react with peroxide to make perchlorate!
|
Chlorate does, however, react with ozone to form perchlorate but the expense involved makes it of academic interest only . . .
|
|
|
NHZ
Harmless
Posts: 22
Registered: 9-8-2011
Member Is Offline
Mood: No Mood
|
|
Got it.. Guess that one officially falls under too good to be true.
I have read about heating it, but I also saw the warnings that accompanied that method.
I've been keeping my eyes open for platinum clad for the other method, and will just stick with that.
Perhaps an email is in order to the young gent who posted that video. With amateurs such as myself,
that video may lead to a false sense of security...
Thank you for the help 
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
| Quote: | | Guess that one officially falls under too good to be true. |
Ozonised oxygen, fed to an actively stirred chlorate solution will slowly (ozone ouput is normally quite small) oxidise all of the chlorate to the
perchlorate!
|
|
|
NHZ
Harmless
Posts: 22
Registered: 9-8-2011
Member Is Offline
Mood: No Mood
|
|
What type of apparatus would be used for this ozone process?
Even a general idea would suffice. I may find it easier and less hassle
over hunting down and spending $$$ on platinum clad for such small amounts..
The best info I have found so far has been this gentleman's videos.
http://www.youtube.com/watch?v=O1aWzrRBMjk&feature=mfu_i...
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
If you can waith I will make a guide in 1-2week, if you cannot simply U2U me something and I will help you for making O3
From a apparatus that cost far less than 10$ CAN.
[Edited on 11-8-2011 by plante1999]
[Edited on 11-8-2011 by plante1999]
I never asked for this.
|
|
|
NHZ
Harmless
Posts: 22
Registered: 9-8-2011
Member Is Offline
Mood: No Mood
|
|
That's sounds fine... I am in no rush, and to do things safely, its
better to take more time.
Is there a name for a common apparatus used in this regard? I
figure a HV source of some sort, but how its applied has me thinking.
If there is a 'name' or 'method' for the procedure you can give me,
I can start some reading on it now. Designing something is the easy part for me,
just need to know where to begin 
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
electrolisis of 15% H2SO4 with Pb anode.
[Edited on 12-8-2011 by plante1999]
I never asked for this.
|
|
|
NHZ
Harmless
Posts: 22
Registered: 9-8-2011
Member Is Offline
Mood: No Mood
|
|
Just for clarification, and pardon my ignorance.. Pb meaning a lead anode and what is the 15?
I have a rough idea, but cant picture the setup..
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
edited.
Simply make an leak free electrolisis cell and pass all the gas in a plastic tube.
I never asked for this.
|
|
|
NHZ
Harmless
Posts: 22
Registered: 9-8-2011
Member Is Offline
Mood: No Mood
|
|
Ahh, okay, that is making more sense..
So pass the gas through a saturate solution of chlorate?
Are there unique circumstances such as
temperature of the saturate and size of the bubbles?
Also what indication do I have of a successful conversion?
Please keep in mind, I understand the concept, but if the explanation
is too vague I get 'lost'
Thanks for the help by the way... I appreciate it
Edit:
Found an interesting cell design for those interested.. Though it
does use graphite, but still interesting none the less..
Link> http://www.thscience.no/dump/frogfot/synthesis/chloratecell1...
[Edited on 12-8-2011 by NHZ]
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
for an ozone cell:
Electrolise 15% H2SO4
Temperature should never get more than 35 degree celcius or an expolion will appen ( It appen 1 time to me) , lead anode is very important , you can
cast lead piece inside a poly tube withch is buried in the ground.
Than you simply take a chlorate sollution ( usualy from a graphite aonde sodium chlorate cell and you pass for somes day O3 gas , slowly it will make
NaClO4 , but if you want info about a chlorate cell I can help you.
I never asked for this.
|
|
|
NHZ
Harmless
Posts: 22
Registered: 9-8-2011
Member Is Offline
Mood: No Mood
|
|
Interesting hazards on this one
I use sulfuric acid all the time for anodizing with obviously less
issues. I did some reading on the topic of ozone production and
found a few threads back to this site. I also found a .pdf with the
following diagram:
^ Is this along the lines of what im looking at? Its a bit of a setup
but im never in the mood for 'exploding' experiments..
Also found this:
Being a simpler solution, I may try this as well. Im assuming
there is no worry about an explosion if the gasses are collected separately?
Also what side cathode or anode) is the o3 produced?
[Edited on 12-8-2011 by NHZ]
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
If gas are separated no woory for explosion , O3 is produced at the anode (+).
I never asked for this.
|
|
|
polaris96
Harmless
Posts: 4
Registered: 25-8-2011
Member Is Offline
Mood: No Mood
|
|
I wouldn't try making the process above work if I were very new.
nstead, I'd use my electrolyisi cell in a two step process to produce sodium perchlorate from NaCl(aq) (or, even, in a one step process from purchased
NaClO3) . Then, I'd take my NaClO4(aq) brine and dissolve some commonly available KCl into it. I'd agitate and filter the resulting mixture and
then crystalize my KClO4.
I WOULDN'T worry about Ozone, H2SO4, or any other toxic/caustic/semistable or difficult processes at my entry level of knowledge. I'd put my nifty
white KClO4 in a ziploc bag and STORE IT FOR LATER USE.
Then, I'd learn to extract Potash from wood ashes and then KNO3 from composted manure. I might, then, stroll down the avenue of black powder. After
that, I'd Take out my H2SO4 and learn to make some HNO3. I wouldn't want to leave HNO3 sitting around, so I'd make a bit of nitrocellulose and
informally compare the deflagration to that of the Black Powder I'd make previously.
Only then, with the theoretical ability to deal with both metathesis and Redox at a sophomore university level and the practical ability from more
basic exercises, would I even consider opening the KClO4.
I know you didn't ask for the lecture, but that's the cost for a simple process to give you what you want. You want to make KClO4 instead of the
commonly touted KClO3. That shows wisdom. Please be sure you're ready to use what you make safely.
BY the way, if you haven't read it, yet, pick up a copy a "Caveman Chemistry". I REALLY wish I'd had the damned thing as an undergrad.
Good Luck and Be Safe.
ps- I absolutely LOVE the look of those electrolysis cells in the picture. Think I may need to retool!
Graphite makes a decent anode if you don't mind a slow process, lots of time, and crappy efficiency. I use it a lot.
If you can get free electricity somewhere it's probably most cost effective. Expect your brines to get black and skanky if you use it. Not a problem
so long as you're filtering before recrystalization.
[Edited on 28-8-2011 by polaris96]
[Edited on 28-8-2011 by polaris96]
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
| Quote: | | I'd use my electrolyisi cell in a two step process to produce sodium perchlorate from NaCl(aq) (or, even, in a one step process from purchased NaClO3)
. |
Which type of anode would you use - I'm assuming you know that graphite anodes won't produce perchlorate?
|
|
|
bbartlog
International Hazard
Posts: 1139
Registered: 27-8-2009
Location: Unmoored in time
Member Is Offline
Mood: No Mood
|
|
Uh, interesting advice. Have you done any of this stuff yourself? Or are you just encouraging someone else to screw around with premodern chemistry
for your entertainment? The processes in question are really laborious; very poor learning-for-effort if education is what someone needs. That's not
to say they're not worth doing if someone likes that kind of thing (and I do!), but as generic advice to someone this is kinda weird.
|
|
|
polaris96
Harmless
Posts: 4
Registered: 25-8-2011
Member Is Offline
Mood: No Mood
|
|
@ Hissingnoise. Very good point, sir. You actually can produce NaClO4 with graphite but it's messy and they get wasted really fast. I have done so.
The platinum electrode NHZ mentions earlier is pretty good for the NaClo3 -> NaClO4 run
@NHZ: Swap your graphite electrodes for the platinum in the second run if you don't want a mess.
@bbartlog: Yes, sir, I've done all of it myself. I do confess lots of the advice comes from an epiphany I had after reading the book I suggested by
Mr. Dunn. I think it's excellent advice for any chem student. I'm an EE not a Chemical Engineer. Chem was pedantic and exceptionally BORING to me
as undergrad, so I'm not the guy who wondered what it would be like to make nitroglycerine after hours in my coffeemaker.
I had 0 interest in anything chemical, save the very specific interactions that govern semiconductor behaviour until a friend (a Chemical Engineer,
herself) gave me the book and make me promise to work through it. Now I mess around a lot with chemistry. It's fun because of the history and
because of the widget factor one gets from using common ingredients. So, I recommend the work to everyone.
Have I mentioned I also teach part time?
Bearing that in mind, please understand my chagrin at encouraging a novice to mess around with an H2SO4 brine and O3(g) when similar results could be
obtained (albeit with a longer time investment) from a SALT BATH (point freely given about the graphite anode decomposing quickly generating NaClO4.
But, he already has platinum, which will do it)
I suggested the approach above because it provides experiments of increasing complexity that allow the products of each to be employed in the next
process. It's my way, not something I read about elsewhere. The early experiments (like extracting KCo from ashes) require little rigor but teach
lab skills. the KCo can be used in the production of KNO3 etc etc etc. get it? He might even use the KCo produce KClO4 from NaClO4. At the end he
gets HNO3, which is probably more useful than KClO4, itself.
You may not agree and I respect that. I think this is is a good way for a novice to pick up skills and aquire a few useful ingredients for later use.
I DON'T endorse messing around with KClO4 as a way to discover the wonders of chem. I also think it's nutty to attempt a process as complex as the
one shown above at entry level. That's not a rock thrown at bbartlog; I think the OP bit off a bit much for a first project.
So far as the premodern chemistry goes, that's what we're all doing here. KClO4 is readily available at about $7 per pound. We're not talking about
making a rare and forbidden product, here.
bbartlog I hope you don't feel I've attacked you. I'm explaining why I said what I said. I respect you and realize I'm not a familiar face on this
forum. Like NHZ, I'm here to see what else I can learn. Carpe diem
|
|
|
polaris96
Harmless
Posts: 4
Registered: 25-8-2011
Member Is Offline
Mood: No Mood
|
|
btw a quick search yields this link http://www.pyroguide.com/index.php?title=Preparing_perchlora... for some background on perchlorate cells. Amazing whats out there :p
EDIT: since I'm throwing out links, this is the one I used for inspiration when I was into making Chlorates http://webpages.charter.net/dawill/tmoranwms/Chem_Chlorate.h...
[Edited on 29-8-2011 by polaris96]
|
|
|
bbartlog
International Hazard
Posts: 1139
Registered: 27-8-2009
Location: Unmoored in time
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by polaris96  |
@bbartlog: Yes, sir, I've done all of it myself.
I suggested the approach above because it provides experiments of increasing complexity that allow the products of each to be employed in the next
process.
|
In that case, well done and sorry if I seemed harsh. That notwithstanding, not everyone has enough wood ashes handy (nor manure, space and time) to do
what you suggested; it takes a year or two to make nitre the old fashioned way. There are some modern tricks to accelerate the process but now you've
wandered out of beginner territory...
| Quote: | | (like extracting KCo from ashes) |
Do people really abbreviate carbonate that way? Seems dodgy (which is to say ambiguous though of course in this case we know what you mean...).
| Quote: | | I think the OP bit off a bit much for a first project. |
Well, yeah. But nobody likes to be told they should be playing with vinegar and baking soda instead. And sometimes people (even newbies) can pull off
the complicated stuff; mostly comes down to persistence, i.e. not having unreasonable expectations about how easy something will be.
BTW, if you have any information about your KNO3 project I would love to see it posted. I tried to do this once in a large flowerpot (and failed) and
am about six months along with a much larger nitre bed, now using about a half ton of mixed chicken manure / straw / slaked lime. But I'm still far
from sure I'll see any KNO3...
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
