Pages:
1
..
4
5
6
7
8
..
23 |
hkparker
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 601
Registered: 15-10-2010
Location: California, United States
Member Is Offline
Mood: No Mood
|
|
I tried pool Ca(ClO)2 with sulfur as suggested earlier, however it didn't react. I believe this to be due to the hypochlorite containing large
amounts of TCCA, so maybe it will react in a more pure form.
Anyway I have hardly found enough free time to shoot, even for my own channel, but I should be free this weekend. Here's what I hope to film:
KMnO4 and glycerin.
KClO3, sugar, and sulfuric acid.
Manganese heptoxide and ...stuff.
Those are the obvious ones. Ill also do:
Acetylene and chlorine
"Negative X" flash powder (silver nitrate, zinc, and ammonium chloride)
I'm looking into ICl and some organics.
And maybe sifting flower over the reactions to create a bigger flame
My YouTube Channel
"Nothing is too wonderful to be true if it be consistent with the laws of nature." -Michael Faraday
|
|
UnintentionalChaos
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1454
Registered: 9-12-2006
Location: Mars
Member Is Offline
Mood: Nucleophilic
|
|
I've got spontaneous ignition of parrafin wax vapor working. I'll make video. This is the test tube in water demo I had mentioned earlier. After doing
it a few times, I have different ideas about the mechanics. It's above the autoignition temperature at boiling. Water seeping into the cracked tube
after plunging into ice water creates a steam explosion that sprays the wax out as a mist. This spontaneously ignites when dispersed in air.
Here's someone else's video of the demo:
<iframe sandbox title="YouTube video player" width="480" height="390" src="http://www.youtube.com/embed/4vDM22dplrk" frameborder="0"
allowfullscreen></iframe>
[Edited on 2-25-11 by UnintentionalChaos]
Department of Redundancy Department - Now with paperwork!
'In organic synthesis, we call decomposition products "crap", however this is not a IUPAC approved nomenclature.' -Nicodem
|
|
Morgan
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1675
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
I liked how casual the demonstration was, one hand on the goggles. I came across this article on paraffin. It came to mind when I was thinking about
the demonstration, how sodium melts at a low temperature but boils at a relatively high temperature. So I got to wondering what the boiling point of
wax was.
"Because of the difficulty in controlling the heating rate in a microwave oven, paraffin
wax should only be heated to melting point in a water bath with a controllable
electric heat source.
Direct heating over an electric mantle or in a microwave oven could easily produce
temperatures of the same order as the flash point (180oC) thus greatly increasing the
likelihood of ignition. Since the melting point is about 60oC and the boiling point is
370oC, uncontrolled heating could easily push the temperature of the molten liquid into
this zone. Obviously, heating with a bunsen burner or other gas flame would also be
highly likely to produce a fire and must be expressly forbidden." ha
http://www.uq.edu.au/ohs/pdfs/alert-paraffin.pdf
Another source
Flashpoint ( °C): 199°C
Boiling point: >370°C
Autoflammability: 245°C
http://www.logitech.uk.com/cn/MSDS/Files%5C0CON-194.pdf
[Edited on 25-2-2011 by Morgan]
|
|
Formatik
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 927
Registered: 25-3-2008
Member Is Offline
Mood: equilibrium
|
|
Quote: Originally posted by NurdRage ![](images/xpblue/lastpost.gif) | I tried the pool chlorine and break fluid a few weeks ago but nothing happened. Although it might be because i have old stuff.
Has anyone else tried this? |
The amounts used may need to be larger. Fresh hypochlorite can likely influence the reaction. As it decomposes over time, Ca(OCl)2 forms CaCl2 and
Ca(ClO3)2, both of which are very hygroscopic. The article below indicates methyl carbitol (a glycol ether) and dry hypochlorite react after
a few minutes evolving irritating smoke and fire. Glycerin is said to react quicker. I have seen some other household products with similar glycol
compounds, those could react to give fire (I'm betting at least with permanganate).
Attachment: ie50592a013.pdf (642kB) This file has been downloaded 766 times
There is also equal parts of I2 with Al, Zn, or Mg. Adding a drop of water is said to cause ignition and release iodine vapors (mentioned in DOI:
10.1021/ed032p273). The mixture with aluminium mixture was also discussed earlier in the thread.
|
|
Chordate
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 108
Registered: 23-2-2011
Member Is Offline
Mood: No Mood
|
|
You can actually do a very similar thing with bacon grease and water.
Take a cast iron skillet with a few quarts of bacon grease in it, heat it over a campfire to just about it's smoke point, and then, using a 14 foot
pole made by lashing a few oars together you carefully pour about 16 ounces of water into the bacon grease. The steam formed carries up the grease
forming a nice fuel-air mixture, which ignites on the campfire. Sometimes you get 20-30 foot fireball.
|
|
Morgan
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1675
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
I remember when I was about 10, I put some Cox glow fuel on a small pile of calcium hypochlorite. It quickly turned the off-white granules an almost
potassium dichromate orange color, and then a few seconds later a spontaneous crackly red fire. I guess back then the HTH chlorine product was 75%
pure. One day I put little piles of sulfur and hypochlorite out in the yard and lit them with the hose. Another time I found out it would light
without water for I had put a few tablespoons of well mixed sulfur and calcium hypochlorite in an empty plastic sulfur jar and hours later just after
the lid was unscrewed, it went off in a near flash. Oh those days of innocent wonder.
|
|
NurdRage
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 182
Registered: 11-11-2010
Member Is Offline
Mood: No Mood
|
|
HKparker has just given me his four videos on the following methods:
Acetylene + chlorine (via carbide)
manganese heptoxide
permanganate + glycerine
Sugar + chlorate
Thanks Hkparker.
If the rest of you want to send me your raw files, message me on a method. Alternatively i can swipe them through youtube although i prefer not to
since the quality is lower.
i still want to get more methods, so if keep filming if you want to participate.
|
|
Morgan
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1675
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
Maybe you could do the paraffin test tube in water fire using sulfur instead.
Boiling Point: 832oF (444oC)
Freezing/Melting Point: 230-246oF (110-119oC)
Bulk Density: Lumps 75-115 lbs./ft3 Powder 33-80 lbs./ft3
Flashpoint: 405OF (207.2oC)
Flammable Limits: LEL: 3.3 UEL: 46.0
Auto-ignition Temperature: 478-511oF (248-266oC)
http://www.georgiagulfsulfur.com/properties.htm
|
|
NurdRage
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 182
Registered: 11-11-2010
Member Is Offline
Mood: No Mood
|
|
kuro96inlaila gave me his video on potassium vs tissue paper, thanks kuro96inlaila.
things are looking good
|
|
Morgan
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1675
Registered: 28-12-2010
Member Is Offline
Mood: No Mood
|
|
The second full paragraph talks about lowering the autoignition temperature with pure oxygen. Maybe a demonstration could be arranged around this
philosophy.
http://books.google.com/books?id=ygATMSwPbtAC&pg=PA139&a...
|
|
Elawr
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 174
Registered: 4-6-2006
Location: Alabama
Member Is Offline
Mood: vitriolic
|
|
Did we mention introducing wad of turpentine-soaked paper towel into vessel of chlorine gas...lot of dense white fumes followed by flames and plenty
of back smoke.
1
|
|
NurdRage
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 182
Registered: 11-11-2010
Member Is Offline
Mood: No Mood
|
|
thanks MrHomeScientist for sending me his raw video on the reaction of aluminum and iodine!
|
|
NurdRage
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 182
Registered: 11-11-2010
Member Is Offline
Mood: No Mood
|
|
KMnO4 + Ethylene Glycol
This is potassium permanganate and ethylene glycol (primary component of antifreeze)
almost exactly the same as glycerin:
<iframe sandbox title="YouTube video player" width="640" height="390" src="http://www.youtube.com/embed/6hxwOS4c1oE" frameborder="0"
allowfullscreen></iframe>
Keep your submissions coming, if you want to send me raw files, upload them to megaupload first and then send me the link. I'll tell you when i
finished downloading so you can take it off.
[Edited on 7-3-2011 by NurdRage]
|
|
MrHomeScientist
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
I did a large scale version of acetylene + chlorine yesterday, and I'll put it on megaupload soon. I know hkparker already sent you one, but mine's
short and might make for a good extra segment. I'll leave that up to you.
I also tried making manganese heptoxide, but that failed twice. The first time I used battery acid, and it only made the purple color of dissolved
KMnO4 and had no reaction at all. Next I tried more concentrated 15M acid - this produced a brown color and also showed no reaction. I'm thinking the
acid needs further concentration, since producing Mn2O7 requires the dehydrating power of H2SO4 - does that sound right?
|
|
NurdRage
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 182
Registered: 11-11-2010
Member Is Offline
Mood: No Mood
|
|
yeah, manganese heptoxide needs conc. (98%) sulfuric acid to work reliably.
By all means send me duplicates and repeat experiments, the more angle we get the better
|
|
slinky
Harmless
Posts: 39
Registered: 14-9-2010
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by NurdRage ![](images/xpblue/lastpost.gif) |
I tried the pool chlorine and break fluid a few weeks ago but nothing happened. Although it might be because i have old stuff.
Has anyone else tried this? |
If you search "Chlorine and Brake Fluid " on youtube you can see many videos of fireballs and small explosions being made. I haven't personally tried
this. Also keep in mind that there are several different blends of break fluids. http://www.advancepetro.com/differentbrakefluid.htm I'm thinking that the 5.1 would be the best choice.
|
|
slinky
Harmless
Posts: 39
Registered: 14-9-2010
Member Is Offline
Mood: No Mood
|
|
Here is a US army technical manual which includes several methods of starting fire with chemicals.
[Edited on 3.9.2011 by slinky]
|
|
mewrox99
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 321
Registered: 7-6-2010
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
Where is this manual you speak of?
It sounds super interesting
|
|
slinky
Harmless
Posts: 39
Registered: 14-9-2010
Member Is Offline
Mood: No Mood
|
|
Sorry about that. I exceeded the 2 MB attachment limit. So the board allowed me to post but stripped the TM
http://www.multiupload.com/Y09P1DE2WI
|
|
hkparker
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 601
Registered: 15-10-2010
Location: California, United States
Member Is Offline
Mood: No Mood
|
|
I should be doing a water activated flash powder (the NH4NO3/AgNO3/Mg type) in the next few days and ill send that around to you NurdRage. After that
I wanna do a short about spraying flower over any method of fire, ill get on my table outside and make a big demo of it. Then that will be all for
me. Sounds like this is really coming together
My YouTube Channel
"Nothing is too wonderful to be true if it be consistent with the laws of nature." -Michael Faraday
|
|
mewrox99
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 321
Registered: 7-6-2010
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
Hey Nurdrage
Can i msg u the raw file of the chip in Mn2O7.
|
|
slinky
Harmless
Posts: 39
Registered: 14-9-2010
Member Is Offline
Mood: No Mood
|
|
"Hypergolics" are chemicals that ignite upon mixing with an incompatible material. These mixtures create heat when mixed which is sufficient to cause
ignition. No ignition source is necessary. Storage and use of these materials must be thought out carefully. Examples of these groups are provided.
* perchloric acid + magnesium powder = fire
* acetone + 85%nitric acid = fire
* nitric acid + phenol = fire
* concentrated nitric acid + triethylamine = fire
* red fuming nitric acid + aromatic amines = fire
* divinyl ether + 96% nitric acid + 5% sulfuric acid = fire
* 90% solution of potassium permanganate in red fuming nitric acid + alcohols = fire
* solid potassium permanganate + ketones, esters, alcohols = fire
Source: http://safety.science.tamu.edu/combreact.html
Running a patent search for "Hypergolic" returned 820 results. Here are some of the results.
Attachment: 5932837.non.toxic.hypergolic.miscible.bi.pdf (36kB) This file has been downloaded 1444 times
Attachment: hypergolic.azide.fuels.with.hydrogen.peroxide.us6949152.pdf (56kB) This file has been downloaded 776 times
Attachment: hypergolic.propellants.us3740947.pdf (117kB) This file has been downloaded 584 times
Attachment: liquid.hypergolic.propellent.us20050022911.pdf (66kB) This file has been downloaded 653 times
Attachment: make.non.hypergolic.fules.hypergolic.us4316359.pdf (132kB) This file has been downloaded 693 times
Attachment: non.toxic.hypergolic.propellant.us5932837.pdf (45kB) This file has been downloaded 645 times
|
|
NurdRage
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 182
Registered: 11-11-2010
Member Is Offline
Mood: No Mood
|
|
@hkparker looking forward to it!
@Mewrox99 sure, just send me the megaupload link
|
|
hkparker
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 601
Registered: 15-10-2010
Location: California, United States
Member Is Offline
Mood: No Mood
|
|
I was wrong about my negative x formula, ill be doing two, silver nitrate/magnesium and ammonium nitrate/zinc/sodium chloride
My YouTube Channel
"Nothing is too wonderful to be true if it be consistent with the laws of nature." -Michael Faraday
|
|
Formatik
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 927
Registered: 25-3-2008
Member Is Offline
Mood: equilibrium
|
|
Quote: Originally posted by slinky ![](images/xpblue/lastpost.gif) | ...
* perchloric acid + magnesium powder = fire
* acetone + 85%nitric acid = fire
* nitric acid + phenol = fire
* concentrated nitric acid + triethylamine = fire
* red fuming nitric acid + aromatic amines = fire
* divinyl ether + 96% nitric acid + 5% sulfuric acid = fire
* 90% solution of potassium permanganate in red fuming nitric acid + alcohols = fire
* solid potassium permanganate + ketones, esters, alcohols = fire
Source: http://safety.science.tamu.edu/combreact.html |
Usually in those sorts of lists, the reactions do not work as one might think. Sometimes you need large amounts, because they are talking about
hazards - where lab-scale and industrial-scale hazards are mixed together as precautions. The list also gets a bit too general.
The reaction of acetone with fuming nitric acid is detailed in the silver acetylmethylnitrolate thread. In small amounts, it does not catch fire, but
crackles violently and gases off nitrogen oxides heavily, because of the products of the reaction it seems it's more likely to explode than ignite in
larger amounts.
The percentage of KMnO4 in red fuming nitric acid which is said to make primary aliphatic and some secondary alcohols immediately hypergolic with the
acid, is 20% according to Brethericks. I had some success in getting a flame from this oxidant mixture and turpentine. But not MeOH, EtOH in small
quantities.
I've mixed KMnO4 with ethyl lactate, diethyltoluamide, and methylethylketone and none ignited or glowed after several minutes. The ethyl lactate was
the only one to visibly react and reduced the permanganate turning brown under mild evolution of fumes within a few seconds.
|
|
Pages:
1
..
4
5
6
7
8
..
23 |