Pages:
1
..
18
19
20
21
22
..
60 |
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Seems to me you didn't produce much P and that some of it got converted to phosphine.
Another theory could be that the orthophosphate, in the absence of silica, was reduced to phosphide [-III], rather than to elemental phosphorus:
AlPO4 + 2 C ---> AlP (or similar) + 2 CO2
AlP + 3 H2O ---> Al(OH)3 + PH3
You seem rather hell bent on trying a very elegant set up on methods (mixtures) that seem unproven... ![:(](./images/smilies/sad.gif)
DO try Strepta's metaphosphate + silica + Al: salvation lies therein!
|
|
Magpie
lab constructor
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
What does this look like?
Quote: Originally posted by Magpie ![](images/xpblue/lastpost.gif) | Today I made a small amount of P according to the following reaction:
6NaPO3 + 10Al + 3SiO2 --> 3Na2SiO3 + 5Al2O3 + 6P
[Edited on 6-3-2010 by Magpie] |
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
Strepta
Harmless
Posts: 44
Registered: 6-5-2004
Member Is Offline
Mood: No Mood
|
|
@blogfast: Magpie knows full well about the reduction of metaphosphates. He and I are exploring different chemistries for the lab prep of P4. The
following excerpt is from Industrial and Engineering Chemistry, V 21, No 11, p 1130, originally posted by SC_Wack upthread several weeks ago:
“To determine whether addition of silica to the charge
increases the rate of reduction of aluminum phosphate,
10-gram mixtures containing equal weights of aluminum
phosphate and carbon and sufficient silica to give a 1 : 1 mol
ratio of alumina to silica were heated for 1 hour at 1050"
and at 1100" C. The percentages of phosphorus volatilized
were 5.3 and 73.7, respectively, showing that silica has very
little, if any, effect in accelerating the reduction of aluminum
phosphate at these temperatures.”
The importance of silica in the reduction of tricalcium phosphate is acknowledged and contrasted with this result. One result is that the reactants do
not fuse together as they do with the metaphosphate/SiO2/Al reaction, making P4 recovery and cleanup much more straightforward.
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Touché!
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
I made elemental phosphorus today. I was surprised how easy it was. I got a 6-inch long, 1-inch wide alumina tube off ebay for $20, and a roll of
nichrome wire for like $5. I wound about ten feet of nichrome wire around the tube. Then I lined a big tomato can with fiberglass insulation, then
made an inner layer of rockwool purchased from a hydroponics store. I nested the tube inside that, and packed both ends with fireclay plugs. I had a
stainless steel tube coming out of the top plug and into a beaker of water. I hooked up alligator clips to the wire, then plugged the whole thing
directly into the wall. A bad idea if you don't know what you're doing, but I do. I had it hooked up to one of those kill-a-watt things so I could
see how much power I was drawing, which turned out to be like 500 watts.
The next step was packing it with reactants. I mixed ground up charcoal, phosphate fertilizer, and powdered fiberglass together and filled the tube
with that.
Then I fired it up again with the reactants in it. At first a bunch of smoke came out. Then that stopped. Then some other gas came out, then that
stopped. Then a bunch of white smoke came out, which caught fire as soon as the bubbles came out of the water. The bursts of flame continued for a
while, then stopped. This was all done outside, btw. So I unplugged the device and gave it some time to cool off. Then I went and looked at the
beaker. It had a white scum on top, that when I swirled it around, a bunch of flecks fell to the bottom. It also had that matches/fireworks
phosphorus smell to it. I didn't take a huge whiff of it, but I couldn't help noticing that.
I was surprised at how simple it was, especially considering the lack of firsthand accounts when it comes to preparing elemental phosphorus.
[Edited on 4/1/10 by Melgar]
|
|
halogenstruck
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 61
Registered: 24-9-2009
Member Is Offline
Mood: No Mood
|
|
it`s easier if u use microwave.
i mixed equal weights of charcoal powder and 85% H3PO4 very well then put in test tube and cotton wool and then salt layer==>microwave for 4
minutes.
a gas comes out which burns and at the end u can see green phosphorescence of P inside tube and if u put end of tube in water upside down u see it
stops.
red spots in cotton wool and salt is red phosphorus
i did not have glass wool-glass tube,... to separate P.
it smells also like white P ,garlic.
huge fumes of P4O10 comes almost immediately after turning microwave on
|
|
halogenstruck
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 61
Registered: 24-9-2009
Member Is Offline
Mood: No Mood
|
|
P preparation in microwave from H3PO4/C
Attachment: P prep in microwave.pdf (1.3MB) This file has been downloaded 1028 times
|
|
halogenstruck
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 61
Registered: 24-9-2009
Member Is Offline
Mood: No Mood
|
|
I MIXED 100% extra mole/mole charcoal powder and 85% H3PO4 then i put it at the bottom of a test tube,covered by a thin glass wool layer,upside-down
inside a cup of water.
in first 4 or 5 minute,a lot of gas was evolved.but 16min was necessary to allow P ring comes down the tube.
because P releases very fast but immediately because of heat turns to red/violet P.
red/violet P melting point or sublimation temperature based on wikipedia is between 416 to 590 °C.
therefore it does not come out easily as mixture does not warm very well and needs lengthy heating in microwave to get warm enough all the area
inside.
as another idea,it`s not a bad way just to heat in microwave for 5min then using the black mixture as a phosphorus containing mixture: Red P/active C
in reactions
result was yellow P containing little Red P,waxy.
white fume in air due to auto-oxidation in air,greenish phosphorescence[chemiluminescence] especially when boiling with water
starting with 1.5g C resultin just a little bit.
taking out P from mixture is not easy.even in us patent related to microwave reduction,they calculated yield based on weight reduction
[Edited on 8-4-2010 by halogenstruck]
[Edited on 8-4-2010 by halogenstruck]
|
|
condennnsa
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 217
Registered: 20-4-2010
Location: Romania
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Melgar ![](images/xpblue/lastpost.gif) | It also had that matches/fireworks phosphorus smell to it. I didn't take a huge whiff of it, but I couldn't help noticing that.
[Edited on 4/1/10 by Melgar] |
Fireworks contain NO phosphorous. I think you confuse the smell of P2O5 with that of sulfur dioxide. SO2 is the smell of matches and fireworks. The
only pyrotechnic composition containing phosphorous is armstrong's mixture (KClO3/P) and it is extremely sensitive and never used. Matches however do
rely on phosphorous, but only at the instant when they are lit, the KClO3 from the match head and the red phosphorous from the striking surface react
to give enough heat to ignite the rest of the sulfur/KClO3 mixture in the matchhead.
|
|
Jimmymajesty
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 153
Registered: 9-7-2009
Member Is Offline
Mood: No Mood
|
|
I also made some phosporous from the strike surface of a matchbook, scaped off the red P with a pocket knife, then took a small glass tube sealed at
one end, and poured the red P inside it, then I filled up the small tube with butane and heated with an open flame, the red P immediately turned into
white.. It took about a second!
I went into a dark room and shook the white P drop out of the tube, it immediately started to glow upon contact with air It is a really nice experiement and easily carried out by anyone @ home.
|
|
entropy51
Gone, but not forgotten
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1612
Registered: 30-5-2009
Member Is Offline
Mood: Fissile
|
|
Quote: Originally posted by Jimmymajesty ![](images/xpblue/lastpost.gif) | I also made some phosporous from the strike surface of a matchbook, scaped off the red P with a pocket knife, then took a small glass tube sealed at
one end, and poured the red P inside it, then I filled up the small tube with butane and heated with an open flame, the red P immediately turned into
white.....It is a really nice experiement and easily carried out by anyone @ home. |
I don't get it. You think white P is a good home experiment, but you just said:
Quote: Originally posted by Jimmymajesty ![](images/xpblue/lastpost.gif) | I saw a video on youtube (elementary videos IIRC) in which the dude handled uranium and its salts, but in a glove box to avoid poisoning himself to
death.. Who wants to bring chems like this to his home? | It is much easier to become poisoned by the fumes
of white P than by U.
|
|
Jimmymajesty
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 153
Registered: 9-7-2009
Member Is Offline
Mood: No Mood
|
|
I also do not get it what kind of illness can you get from H3PO4 possibly P2O5?
|
|
Random
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1018
Registered: 7-5-2010
Location: In ur closet
Member Is Offline
Mood: Energetic
|
|
Quote: |
Phosphorus pentoxide is not flammable. It reacts vigorously with water and water-containing substances like wood or cotton, liberates much heat and
may even cause fire. It is corrosive to metal and is very irritating – may cause severe burn to the eye, skin, mucous membrane, and respiratory
tract even at concentrations as low as 1 mg/m3.
|
From wikipedia.
|
|
not_important
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
It's not the oxidation products, it's actual vapour from the white phosphorous - P4 molecules.
Do a Web search on the term "phossy jaw", you'll like the pictures.
|
|
Anders Hoveland
Banned
Posts: 208
Registered: 15-6-2010
Member Is Offline
Mood: No Mood
|
|
If the elemental phosphorous is being made just to obtain P2O5 (or P4O10) as a dehydrating agent, I have a suggestion that can avoid the need for
distillation.
2Na3PO4 + 12S --> 3Na2S + P2S5 + 4SO2gas
obviously this is fused and heated together to drive off the SO2.
The Phosphorus pentasulfide could be used to make H2S, which otherwise would require metal powder to make.
P4S10 + 16 H2O → 4 H3PO4 + 10 H2S (from wikipedia)
Or the P2S5 could slowly burned, giving off SO2, and the P4O10 smoke would quickly crystallize after cooling.
Acetone reacts with P2S5 to make the unstable thioketone, which is extremely stinky, far more so than H2S. You can cause a small town to be evacuated
with this reaction.
[Edited on 27-6-2010 by Anders Hoveland]
|
|
blogfast25
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Have you tried this in practice? This might take some serious temperatures, possibly above the BP of S...
Also I'm not convinced that ΔG < 0 for the first reaction. Of course if SO2 starts coming off it would drive the equilibrium to the right...
|
|
Random
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1018
Registered: 7-5-2010
Location: In ur closet
Member Is Offline
Mood: Energetic
|
|
I am interested in getting red phosphorus from matchboxes. What is the best way of doing it to make it almost pure?
|
|
Sedit
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1939
Registered: 23-11-2008
Member Is Offline
Mood: Manic Expressive
|
|
Locate a forum called wetdreams and then get to reading!
Knowledge is useless to useless people...
"I see a lot of patterns in our behavior as a nation that parallel a lot of other historical processes. The fall of Rome, the fall of Germany — the
fall of the ruling country, the people who think they can do whatever they want without anybody else's consent. I've seen this story
before."~Maynard James Keenan
|
|
JohnWW
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
Red P is very soluble in CS2. If you can get that solvent, try it. It is also soluble in liquid NH3. (I am not sure about ".88" NH3 solution, though).
Or alternatively, you could find a solvent that dissolves the binder (I am not sure what it is - it could be ordinary water-soluble paste) used to
glue the pyrophoric abrasive mixture to the matchboxes, leaving the red P and abrasive unchanged as solids. But then, the problem would be how to
separate the red P from the abrasive.
[Edited on 2-7-10 by JohnWW]
|
|
Picric-A
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
JohnWW- I thought it was white P that was very soluble in CS2, not red P... could be both i suppose...
Try soaking the matchboxes in acetone, then scraping the red P off. that is as pure as you will get it uness you then sublime the red P, makign white
P then convert that to pure red P.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Quote: Originally posted by JohnWW ![](images/xpblue/lastpost.gif) | Red P is very soluble in CS2. If you can get that solvent, try it. It is also soluble in liquid NH3. (I am not sure about ".88" NH3 solution, though).
| There is no solvent for red P at all which does not destroy the red P. If it does dissolve in some solvent
(e.g. a mix of HNO3 and HCl does the job when heated), then it is oxidized to (usually) H3PO4. Indeed, it is white P which dissolves very well in CS2.
The resulting liquid is extremely dangerous, it is self-inflaming in air, because the CS2 quickly evaporates and finely divided white P remains
behind.
|
|
Random
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1018
Registered: 7-5-2010
Location: In ur closet
Member Is Offline
Mood: Energetic
|
|
I will try to soak matchboxes in acetone to remove glue at least. What are other things that are on matchboxes?
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
The brown material usually consists of a mix of red P, fine glass/silica particles to make it more abrasive, some glue and IIRC also some antimony
sulfide (Sb2S3) in order to ease ignition. The amount of red P is only a few tens of percent, the rest is useless crap and it is not easy to separate
from the red P. There is no solvent for red P, nor is there for the glass/silica and separation will be very difficult. You also need a LOT of match
boxes in order to obtain decent amounts. One match box contains just a few mg of red P.
If you are in the EU, then just buy red P, it's not that expensive. If you are in the USA then try to find another area of chemistry which is
interesting for you...
|
|
Anders Hoveland
Banned
Posts: 208
Registered: 15-6-2010
Member Is Offline
Mood: No Mood
|
|
Probably using boric oxide on a sodium pyrophospate would allow operation at a much lower temperature than silica and calcium phospate. All I want is
the P4O10 for drying HClO4 and HNO3, so there is no need to reduce the oxide with charcoal.
|
|
mario840
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 229
Registered: 20-1-2010
Member Is Offline
Mood: No Mood
|
|
Hi guys !
You tell that PCl3 cannot be make from red phosphorus ?? So what about method this :
We make a little PCl3 first from say 10 g of WHITE phosphorus , so we have about 37 ml of pure PCl3 then we add this PCl3 to a red phoshporus in the
flask and then GAS with chlorine ?? this may work ???
|
|
Pages:
1
..
18
19
20
21
22
..
60 |