Reduce-Me
Harmless
Posts: 25
Registered: 11-2-2010
Member Is Offline
Mood: Negative
|
|
A lot of acetonitrile.
So, I'm starting to get a ton of acetonitrile and I'm curious to know what I could do with it besides using it as a solvent.
Any ideas?
|
|
Nicodem
Super Moderator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
The "I'm starting to get a ton of acetonitrile" sounds very much like you are getting used HPLC acetonitrile/H2O mobile phase from some analytical lab
that does not recycles it. If this is the case you should know that it is not so easy to get dry acetonitrile as distillation gives the
acetonitrile/water azeotrope (86% w/w).
As for what you could do with it, you should first define your interests and limits. You can make a lot of things from acetonitrile: ethylamines by
hydrogenation (ethylamine, diethylamine and triethylamine), acetamide by hydrolysis, aryl methyl ketones via either the Hoesch reaction or addition of
arylmagnesiums, alkyl methyl ketones via alkylmagnesiums addition, N-benzylacetamides and N-t-alkylacetamides via the Ritter
reaction, you can use the acetonitrile/H2O2 reagent for epoxidations of alkenes...
Check the attached entry on acetonitrile from e-EROS for more ideas.
[Edited on 2/4/2010 by Nicodem]
Attachment: e-EROS_Acetonitrile.pdf (79kB) This file has been downloaded 6457 times
…there is a human touch of the cultist “believer” in every theorist that he must struggle against as being
unworthy of the scientist. Some of the greatest men of science have publicly repudiated a theory which earlier they hotly defended. In this lies their
scientific temper, not in the scientific defense of the theory. - Weston La Barre (Ghost Dance, 1972)
Read the The ScienceMadness Guidelines!
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
IIRC you can break that azeotrope by saturating it with salt. It splits into two layers. The separation is better if you get the stuff ice cold.
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Apparently you can reduce it with tin chloride in dry ether to get acetaldehyde. Or use it in Grignard reactions to make methyl ketones. You
probably need to get it quite pure for those reactions though.
|
|
vulture
Forum Gatekeeper
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
Drying acetonitrile is a MAJOR pain. Not to discourage anyone, but think about your requirements, i.e. how dry it needs to be. A few colleagues of
mine spent the better part of two weeks trying to get acetonitrile dry enough for electrochemistry. That is, dry enough not to see the characteristic
reduction/oxidation of water in a voltammetry experiment which limits the potential to 1,2V IIRC.
IIRC, drying with P2O5 or CaH2 seemed to yield sidereactions, but I'd have to ask them.
There should also be a section about this in "The Purification of Laboratory Chemicals" which is an extremely useful book for other aspects of
chemistry anyway.
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
UnintentionalChaos
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1454
Registered: 9-12-2006
Location: Mars
Member Is Offline
Mood: Nucleophilic
|
|
Quote: Originally posted by vulture ![](images/xpblue/lastpost.gif) | Drying acetonitrile is a MAJOR pain. Not to discourage anyone, but think about your requirements, i.e. how dry it needs to be. A few colleagues of
mine spent the better part of two weeks trying to get acetonitrile dry enough for electrochemistry. That is, dry enough not to see the characteristic
reduction/oxidation of water in a voltammetry experiment which limits the potential to 1,2V IIRC.
IIRC, drying with P2O5 or CaH2 seemed to yield sidereactions, but I'd have to ask them.
There should also be a section about this in "The Purification of Laboratory Chemicals" which is an extremely useful book for other aspects of
chemistry anyway. |
Did they consider electrolysis itself as a means of drying the material? If you run some decent amperage into the mix (and presumably bubble dry N2
through the liquid to remove dissolved gases, eventually you run out of H2O to turn into gas. Sure, it's impractical for large volumes but how large
was the vessel they were running this in?
Department of Redundancy Department - Now with paperwork!
'In organic synthesis, we call decomposition products "crap", however this is not a IUPAC approved nomenclature.' -Nicodem
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
That's odd. Normally drying solvents that form an azeotrope is easy, you just fractionate out the water. Keeping them dry is another matter.
BTW, acetonitrile reacts violently with H2SO4 so don't try it as a drying agent.
|
|
Reduce-Me
Harmless
Posts: 25
Registered: 11-2-2010
Member Is Offline
Mood: Negative
|
|
Quote: Originally posted by Nicodem ![](images/xpblue/lastpost.gif) | The "I'm starting to get a ton of acetonitrile" sounds very much like you are getting used HPLC acetonitrile/H2O mobile phase from some analytical lab
that does not recycles it. If this is the case you should know that it is not so easy to get dry acetonitrile as distillation gives the
acetonitrile/water azeotrope (86% w/w).
As for what you could do with it, you should first define your interests and limits. You can make a lot of things from acetonitrile: ethylamines by
hydrogenation (ethylamine, diethylamine and triethylamine), acetamide by hydrolysis, aryl methyl ketones via either the Hoesch reaction or addition of
arylmagnesiums, alkyl methyl ketones via alkylmagnesiums addition, N-benzylacetamides and N-t-alkylacetamides via the Ritter
reaction, you can use the acetonitrile/H2O2 reagent for epoxidations of alkenes...
Check the attached entry on acetonitrile from e-EROS for more ideas.
[Edited on 2/4/2010 by Nicodem] |
It is from an HPLC lab that does not recycle it. But The stuff I have usually has 1-5% impurity.
Either trifluoroacetic acid, methanol etc. Nothing I have gotten has water in it yet.
I kind of want to venture a reaction to add two carbons with the KOH via the method from orgsyn
http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv7...
cool "paper" by the way, thanks!
[Edited on 3-4-2010 by Reduce-Me]
|
|
vulture
Forum Gatekeeper
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
Quote: |
That's odd. Normally drying solvents that form an azeotrope is easy, you just fractionate out the water. Keeping them dry is another matter.
|
That's not enough in this case. Alot of water can hide in apparently "dry" acetonitrile.
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
peach
Bon Vivant
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
Vacuum distillation?
Works for alcohol. I mean, it breaks the azeotrope.
As for uses, I can't help much there. Maybe start making your own line of lab gloves?
|
|
zed
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2281
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Can the water be frozen out? Low freezing point for acetonitrile.....-43C?
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
There isn't any simple way to turn it into HCN, accidentally or otherwise, is there? Mostly looking at it from a safety standpoint, but it doesn't
seem thermodynamically favored. Maybe burning it in a low-oxygen atmosphere could do it? CH3CN + O2 = CO2 + H2O + HNC? But I don't remember seeing
that on the MSDS.
[Edited on 5/8/10 by Melgar]
|
|
zed
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2281
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Turn it into HCN? The human body can do that, but only slowly. Quite a few folks have been exposed to acetonitrile on the job, and later died at
home. Delayed reaction. But, it does take a fair amount to do the trick.
Fortunately, as nitriles go, acetonitrile is reported to be less toxic than most.
Still, it isn't water, ethanol, or mineral oil..... If you slosh a few hundred ml of acetonitrile on your tennis-shoes, it behooves you to take
prompt action.
The LD 50 is about 2.5 grams/KG....Not terribly toxic, to most folks, under most conditions.
|
|