| Pages:
1
2 |
MagicJigPipe
International Hazard
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
Nitrogen Dioxide Smell
I haven't messed with NO2 in a long time. Tonight I decided to do a simple nitric acid distillation with KNO3 and H2SO4.
I can barely remember what NO2 smells like (even though it's smell almost left me traumatized last time!). This time it has a weird plasticy smell to
it. Now, this could be it reacting with PVC or the NO2 itself.
It's not really irritating but just your typical annoying plastic smell. I can smell it from about 15 feet away. Do you think this is the actual NO2
or just some oxidation(?) product of the PVC?
I wanted to know so I know if I'm going to die or not. It might be nice to know before it happens. (I haven't been breathing it directly but I also
don't have a fume hood).
Oh yeah, I also have pretty good ventilation. Doesn't NO2 tend to "sink" to the ground because of it's density?
EDIT
Okay, I just got a BIG whiff of it. Now I remember! Oh my god it's the most horrible, awful, disgusting smell I have ever .... arrgggggg... It's
more of a gut renching, lung crunching "feeling" than a smell.
Oh god... Now I'm paranoid. What are the symptoms of NOx overexposure? Can I check for pulmonary edema with a stethoscope?
[Edited on 28-3-2008 by MagicJigPipe]
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
|
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
If you have the feeling that your breathing capabilities are impaired, then you should seek medical attention immediately. NOx is not the stuff to
think of too lightly.
If, however, you only had a single whiff of the stuff and then went away, then I believe that your discomfort more is something between your ears,
than something real.
But in case of doubt, please go to a doctor and don't try to hassle around in attempts to self-diagnose.
|
|
|
not_important
International Hazard
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
It's filled with doctor lingo, still should tell you something
http://www.emedicine.com/EMERG/topic847.htm
| Quote: |
Nitrogen dioxide is a deep lung irritant that can produce pulmonary edema and fatality if inhaled at high concentrations. The effects of NO2 depend on
the level and duration of exposure. Exposure to moderate NO2 levels (50 ppm) may produce cough, hemoptysis, dyspnea, and chest pain. Exposure to
higher concentrations of NO2 (>100 ppm) can produce pulmonary edema that may be fatal or may lead to bronchiolitis obliterans. Some studies suggest
that chronic exposure to nitrogen dioxide may predispose individuals to the development of chronic lung diseases, including infection and chronic
obstructive pulmonary diseases.
* Acute exposure - Symptoms may range from mild cough to mucous membrane irritation to sudden fatality.
o Suspect methemoglobin in patients exposed to nitrogen dioxide gas who exhibit cyanosis or dyspnea.
o The initial absence of significant symptoms does not exclude a subsequent development of serious disease.
* Latency period - Following a delay of 2-48 hours, patients exposed to nitrogen dioxide may develop the following symptoms:
o Dyspnea
o Cough
o Chest pain
o Clinical manifestations of noncardiogenic pulmonary edema
* Late sequelae - The following may develop 2-6 weeks after initial nitrogen dioxide exposure:
o Bronchiolitis obliterans, manifested as fever, cough, and dyspnea
o Diffuse reticulonodular or miliary pattern on chest x-ray
Physical: Initial physical findings are sometimes mild but may progress over the following 72 hours to life-threatening respiratory distress.
* Pulmonary symptoms are the most common manifestation of nitrogen dioxide toxicity.
o Cough
o Dyspnea
o Chest tightness
o Choking
o Wheezing
o Chest pain
o Rales
o Rhonchi
o Decreased breath sounds
o Stridor
* Other acute symptoms
o Light-headedness
o Loss of consciousness
o Restlessness
o Agitation
o Confusion
o Irritation of mucous membranes, including the eyes
o Conjunctival infection
o Weakness
o Fatigue
o Nausea
o Abdominal pain
o Skin burns, in cases of liquid nitrogen tetroxide exposure
* Delayed symptoms
o Tachypnea
o Headache
o Fever, chills
o Insomnia
o Myalgias
o Hemoptysis
o Palpitations
o Cyanosis
o Coma
|
NO2 is roughly half again as heavy as air, if there's much of a draft that's not enough to prevent mixing.
I don't think it'd worth bothering to distill HNO3 if it will be oming inyo contact with PVC or other non-fluorocarbon plastics, you're likely to get
all sorts of crap in the distillate. That's why a lot of old chem books have you distilling in a retort - to avoid contact between hot HNO3 and
organics.
[Edited on 28-3-2008 by not_important]
|
|
|
MagicJigPipe
International Hazard
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
Okay, so basically if it I develope coughing or other symptoms within the next 3 days, I should go to the doctor. Also, if I have a gut feeling I
will go.
I just REALLY don't want to have to explain to the chemophobic what I was doing messing around with NOx.
Thanks guys. And you're right woelen, I'm pretty sure most of this is just anxiety because I feel much better now. I will be vigilant, though.
EDIT
I was using the clear PVC tube to vent the excess (uncondensed) NOx into NaOH solution.
[Edited on 28-3-2008 by MagicJigPipe]
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
|
Jor
National Hazard
Posts: 950
Registered: 21-11-2007
Member Is Offline
Mood: No Mood
|
|
When you're exposed, stop experimenting, to avoid the inhalation of other irritant gasses.
Make sure you rest, dont run or do other sports.
|
|
|
YT2095
International Hazard
Posts: 1091
Registered: 31-5-2003
Location: Just left of Europe and down a bit.
Member Is Offline
Mood: within Nominal Parameters
|
|
another thing to be vigilant about with NO2 gas and others like HCl is that if you`r Not doing it outside or in a fume cupboard but in a room, you
will Drastically reduce the life span of of any TVs or Monitors that happen to be in there as well.
these gases are not only corrosive but the HT circuitry for CRTs acts like a Magnet for these particles and when they condense around this area it`s
only a matter of time before it corrodes something essential for the normal operation these.
I`ve found this out to my cost several years ago when I got through 3 Monitors in a 5 month span!
\"In a world full of wonders mankind has managed to invent boredom\" - Death
Twinkies don\'t have a shelf life. They have a half-life! -Caine (a friend of mine)
|
|
|
MagicJigPipe
International Hazard
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
Just wanted to say thanks again for the responses. I feel fine now and just had some anxiety. NO2 does that to me because I hate the "smell" so much
and I just "feel" like I've been poisoned when I smell it like that.
I'm doing a titration today to determine the concentration of the acid.
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
|
TechnologicallyRetarded
Harmless
Posts: 13
Registered: 14-8-2009
Member Is Offline
Mood: No Mood
|
|
NOx Elimination
I've searched for some time for a thread addressing the dangers and removal of NOx, so far this is the closest. I can sympathise - as I'm sure most of
us can - with MagicJigPipe and his incident.
I recently attempted a TNP synthesis and being aware of the toxicity of NOx I did my best to get rid of most of it.
I have no fume hood. It is regrettable, but an ongoing goal nonetheless.
My set-up was quickfit and the synthesis was done outside. The NOx was led through a solution of 25g Sodium Metabisulfite (Wine brewing grade) and 15g
NaOH in 200ml water and much crushed ice. Much was dissolved, but a layer of faint red rested on top.
Then suddenly a massive surge of this scrubbing solution travelled back into by barely nitrated Phenol! Most upsetting.
Can we collaborate forces to solve this problem? NOx has always been a problem to me, and will continue to be till I get it nailed. I'm still sure
that an Iced scrubbing solution is the way, but how will we do this without get any sucked up?
Flicking through Google I saw articles referring to NH3 and Sulfide as scrubbing agents too.
Tr
|
|
|
chemoleo
|
Thread Moved
14-9-2009 at 14:30 |
1281371269
Hazard to Others
Posts: 312
Registered: 15-5-2009
Member Is Offline
|
|
Do it outside or invest in a fumehood.
[Edited on 14-9-2009 by Mossydie]
|
|
|
Paddywhacker
Hazard to Others
Posts: 478
Registered: 28-2-2009
Member Is Offline
Mood: No Mood
|
|
If you are releasing NOx indoors, or any acidic gasses, for that matter, then also releasing ammonia can make it less harmful. Ammonium sulphate and
NaOH in a bowl will do the trick.
The body can deal with a little ammonia, wheras it cannot with little NOx.
Acidic gasses, if not neutralized, can seep into wood and be slowly released over time where their residues can condense on metallic surfaces and lead
to rapid rusting and corrosion. So best avoided if you have your tools hung up in racks.
|
|
|
chloric1
International Hazard
Posts: 1146
Registered: 8-10-2003
Location: GroupVII of the periodic table
Member Is Offline
Mood: Stoichiometrically Balanced
|
|
Well some industries bubble NOx in sodium carbonate to make sodium nitrate/nitrite. They are more carefull with the NO2 to NO ratios to get higher
nitrite output. But If you do not get much nitrite just titrate the scrubber solution with sulfuric acid/potassium permanganate until a slight
permanent pink remains then discharge the excess permanganate with metabisulfite. Or better use nitric acid with the permangante and discharge
excess permanganate with H2O2 so your solution is all nitrate then boil to concentrated and add saturated barium chloride to reclaim nitrate!
Fellow molecular manipulator
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Quote: Originally posted by Paddywhacker  | | Acidic gasses, if not neutralized, can seep into wood and be slowly released over time where their residues can condense on metallic surfaces and lead
to rapid rusting and corrosion. So best avoided if you have your tools hung up in racks. |
Not to mention hydrolyze the wood, weakening it significantly (sulfuric acid is great at this).
Tim
|
|
|
ctrlphreak
Harmless
Posts: 14
Registered: 3-2-2006
Member Is Offline
Mood: No Mood
|
|
You can readily see it when it comes up, dark brown colored gas.
It's smell is very metallic, doesn't burn in small quantities, but once you smell and acrid, disgusting smell, look for that cloud, stop the reaction,
seperate the reactants if possible, vent the room and leave.
|
|
|
chloric1
International Hazard
Posts: 1146
Registered: 8-10-2003
Location: GroupVII of the periodic table
Member Is Offline
Mood: Stoichiometrically Balanced
|
|
Had a moment! Duh! No need to isolate the nitrate anion with barium the solution shoule consist of potassiu, sodium and manganese nitrates. Sodium or
potassium carbonate would suffice and more nitric acid could be isolated from the mixed alkali nitrates.
On the subject of acid on wood. For some strange reason, the combination of pine wood and HCl smells GREAT to me. I find pure HCl disagreeable
though Go figure!
Fellow molecular manipulator
|
|
|
TechnologicallyRetarded
Harmless
Posts: 13
Registered: 14-8-2009
Member Is Offline
Mood: No Mood
|
|
Re: NOx Elimination
Thanks for your reply chloric1:
| Quote: | | Well some industries bubble NOx in sodium carbonate to make sodium nitrate/nitrite. They are more carefull with the NO2 to NO ratios to get higher
nitrite output. But If you do not get much nitrite just titrate the scrubber solution with sulfuric acid/potassium permanganate until a slight
permanent pink remains then discharge the excess permanganate with metabisulfite. Or better use nitric acid with the permangante and discharge excess
permanganate with H2O2 so your solution is all nitrate then boil to concentrated and add saturated barium chloride to reclaim nitrate!
|
Indeed that would be a fine method for Nitrogen reclamation, but personally I don't mind being a little wasteful of reagents -my only concern is my
neighbors, my family and myself. I do kind of like/need my lungs and other bits affected by NOx.
What I'm trying - and spectacularly failing - to articulate is this: I wish to remove NOx in it's entirety from my reaction.
As I posted above, I did try to use a scrubbing bath consisting of basic Na2S2O5, but I had a major case of suck-back which completely wrecked my
nitration:
| Quote: |
Then suddenly a massive surge of this scrubbing solution travelled back into by barely nitrated Phenol! Most upsetting. |
It did however remove the majority of NOx, which is good. Perhaps there are other ways of removing it. Passing it through a smoky flame or
cold-trapping it. Does anyone have info./experience with this?
Tr
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
I've never had a problem with the small quantities of NO2 released during nitric acid distillation, or found the smell offensive, but I now cool the
receiver in an ice-bath just to be sure.
The thick cloud roiling from a runaway nitration is a different thing, though, and for that reason I can't see myself nitrating phenol or producing MF
this side of getting a hood.
My doctor tells me I have a 'touch' of emphysema but I put that down to a smoking habit.
If I hadn't been told it I wouldn't have known.
Breathing traffic fumes on a busy street is probably as bad as inhaling in a stinky lab. . .
|
|
|
JohnWW
International Hazard
Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
Nitrogen oxides, mostly the lower ones, are generated in substantial amounts by automobile engines, which intake air (21% O2, 78% N2, 1% Ar, and
traces of other gases) and use it to burn fuels (vaporized hydrocarbons, or CH4, or H2). Gasoline-type engines, in which combustion of an heated and
compressed vapor-air mixture takes place with the aid of a spark produced by an alternator, are likely to produce more nitrogen oxides than diesel
engines, in which combustion is obtained simply by extreme adiabatic compression of the mixture to above the flash-point. These oxides, along with SO2
from any sulfur-containing compounds in the fuels, being acidic and fairly toxic, constitute the most dangerous (and corrosive) part of automobile
smog.
[Edited on 16-9-09 by JohnWW]
|
|
|
S.C. Wack
bibliomaster
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
It took very little to give me edema, which I did not seek medical attention for. Went away after a couple days. It's a freaky sensation, feeling your
lung area rattle when you move. I've literally puked out of my lungs from a cold turning to bronchitis/mild pneumonia - which was less freaky.
So I don't advise smelling it.
|
|
|
Jor
National Hazard
Posts: 950
Registered: 21-11-2007
Member Is Offline
Mood: No Mood
|
|
In a busy street, especially if there are busses, I can smell NO2 all the time. I really like the smell of NO2, it smells like chlorine or bromine but
nicer.
I have once got a breath of NO2 wich actually hit me in the nose. I guess the concentration was fairly high as NO2 doesn't irritate at low
concentrations. I aborted experimenting and took a good rest for a day, and I was fine.
Also one day, I inhaled too much bromine. I had some irritation in my chest, and a little bit of pain. But again, I took a day rest (sleeping,
watching TV, etc).
If you inhale too much of a lung irritant, take a day rest, and try to analyse yourself how much you inhaled for how long (at least that's what I
did). For example the levels of bromine were slightly irritating in my nose and I was exposed for about 20 minutes. So that can't be lethal, I think
it was average 5ppm (with peaks of 10ppm) for 20 minutes, while LD50 is about 150ppm for 1 hour. Before you start work, know what concentrations are
dangerous, and know what is the detection level/irritation level.
If you inhaled too much go see a doctor immediately. You don't have to fear losing your lab, when you overexposed yourself to a lung irritant, as you
can tell the doctor that you inhaled lots of chlorine while mixing bleach and HCl when cleanign the toilet. Or say you inhaled too much HCl from
hardware store 30% HCl. Enough stories you can make up.
Those exposures were in my unwise times. I now always work in a fume hood, and without one, I think I wont experiment again with gasses like NO2 and
Br2. Trust me, having a fume hood is one of the best things to have in a lab, it makes you feel so comfortable, sometimes too comfortable that you
overlook the dangers of skin contact 
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
| Quote: Originally posted by Jor | | You don't have to fear losing your lab, when you overexposed yourself to a lung irritant, as you can tell the doctor that you inhaled lots of chlorine
while mixing bleach and HCl when cleanign the toilet. |
But if the irritant is NO2, it would be wise to be up-front about it as one's health should be more important than a lab. . .
You have, though, put your finger on the fact that society's chemophobia can have an actual bearing on the health of chemistry hobbyists.
I, however, have always had a resistance to doctors visits much to my wife's annoyance.
|
|
|
entropy51
Gone, but not forgotten
Posts: 1612
Registered: 30-5-2009
Member Is Offline
Mood: Fissile
|
|
Hissingnoise makes a good point, but depending on their circumstances some people would probably follow Jor's advice. For an NOx exposure you could
say you were cleaning antique copper coins with HNO3 or some other plausible story.
In most cases it probably wouldn't help to tell the doctor that you were nitrating phenol, or whatever. The medical treatment for all the pulmonary
irritant gases is essentially the same and will be determined based on chest x-ray finding, arterial blood gas measurments, and clinical symtomology.
There are no specific antidotes for the pulmonary irritants so there is no need for the doctor to know its identity. Jor's story about bleach and
ammonia in the toilet bowl is an excellent one. Emergency departments see a case of that probably once a week in a busy hospital so it will arouse no
suspiscion but will result in the appropriate medical evaluation and treatment.
There are of course specific antidotes for cyanide, so if you inhaled HCN and are conscious, which is doubtful, tell them it was HCN you were using to
test a sample in your mineral collection.
I would call the paramedics if I developed shortness of breath, extreme chest tightness, coughing up of blood or watery fluid, or cyanosis (blue
color) of lips or skin following an inhalational exposure to a toxic gas.
I strongly recommend not treating yourself with a home-made antidote. But do get to fresh air as fast as you can to stop the exposure.
[Edited on 16-9-2009 by entropy51]
Better to remain silent and appear a fool than to open your mouth and remove all doubt.
|
|
|
TechnologicallyRetarded
Harmless
Posts: 13
Registered: 14-8-2009
Member Is Offline
Mood: No Mood
|
|
All this information is great, but no-one has addressed the methods of gas extraction, except for the mention of a fume hood.
Has anyone used/heard of NOx elimination methods for those of whom a fume-hood is for whatever reason impossible?
Thanks, Tr.
|
|
|
ewalcacer
Harmless
Posts: 6
Registered: 23-4-2012
Location: Brazil
Member Is Offline
Mood: No Mood
|
|
This is an old thread but it was one of the top results for my search on google. I was making elemental silver from silver nitrate a few minutes ago
by decomposing the nitrate in a muffle furnace at 1100º C in order to also melt the silver after decomposition. Since it couldn't be done in the fume
hood here (work lab) all NO2 produced infected the lab. The ammount of silver nitrate I used was something arround 10 grams.
I'm very worried because I could really smell the sweet, chlorine like, odor in the whole lab. I left the lab for a few minutes and kept the door
opened to help ventilation.
Since I got a flu yesterday, it's going to be impossible to cough and know that it's probably from the NO2... Right now I'm feeling great but I'm
freaking terrified that I can get sick from this. Should I really be worried since I'm feeling great right now?
Thanks.
|
|
|
Endimion17
International Hazard
Posts: 1468
Registered: 17-7-2011
Location: shores of a solar sea
Member Is Offline
Mood: speeding through time at the rate of 1 second per second
|
|
| Quote: Originally posted by ewalcacer | This is an old thread but it was one of the top results for my search on google. I was making elemental silver from silver nitrate a few minutes ago
by decomposing the nitrate in a muffle furnace at 1100º C in order to also melt the silver after decomposition. Since it couldn't be done in the fume
hood here (work lab) all NO2 produced infected the lab. The ammount of silver nitrate I used was something arround 10 grams.
I'm very worried because I could really smell the sweet, chlorine like, odor in the whole lab. I left the lab for a few minutes and kept the door
opened to help ventilation.
Since I got a flu yesterday, it's going to be impossible to cough and know that it's probably from the NO2... Right now I'm feeling great but I'm
freaking terrified that I can get sick from this. Should I really be worried since I'm feeling great right now?
Thanks. |
No, there's no need to worry. The described low concentration and the short duration of exposure can't cause any problems unless you suffer from rare
illnesses.
NO2 is not the boogeyman of gases. Like chlorine, it's way too corrosive to the pulmonary system to be foolishly neglected. It can cause pulmonary
oedema if the concentrations are higher and if you somehow inhale a visibly brown cloud, you'd probably start choking and fall on the floor twitching
in shock.
However, it's always a good thing to avoid inhaling it.
In your case, freaking out is a lot worse option.
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
I'd say you're OK!
It kinda depends on the amount of space your lab has.
And while NO2 is detectable by smell at very low concentrations I'd advise a quick visit to a doctor just to be sure . . .
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
